ZipRecruiter

Log In

1

Connector Design Engineer Jobs (NOW HIRING)

Samtec, Inc

Product Design Engineer

Columbia, SC

$119K - $143K/yr

Make significant contributions to design, development, and validation of connector solutions ... Engineering Design Software: SolidWorks, AutoCAD, etc. * Simulation Software: FEA, CFD/Thermal ...

The Structures Company

Design Engineer

Orlando, FL · On-site

$65.38/hr

Design Engineer (Hybrid) LOCATION : Orlando, FL (Hybrid) PAY RATE: $65.38/hour We are a national ... Perform connector selection , board integration, and tolerance/clearance analysis * Utilize PTC ...

TE Connectivity

SR R&D/PRODUCT DVL ENGINEER

Rochester, NY · On-site

$103K - $141K/yr

Design innovative passive optical connector assemblies with sub-micron alignment precision for fiber-to-PIC (Photonic Integrated Circuit) applications • Tolerance Engineering: Develop sub-micron ...

samtec

Product Design Engineer

Columbia, SC · On-site

$119K - $143K/yr

Make significant contributions to design, development, and validation of connector solutions ... Engineering Design Software: SolidWorks, AutoCAD, etc. * Simulation Software: FEA, CFD/Thermal ...

Samtec, Inc Careers

Product Design Engineer

Columbia, SC · On-site

$119K - $143K/yr

Make significant contributions to design, development, and validation of connector solutions ... Engineering Design Software: SolidWorks, AutoCAD, etc. * Simulation Software: FEA, CFD/Thermal ...

Samtec, Inc Careers

Product Design Engineer

New Albany, IN

$119K - $143K/yr

Make significant contributions to design, development, and validation of connector solutions ... Engineering Design Software: SolidWorks, AutoCAD, etc. * Simulation Software: FEA, CFD/Thermal ...

samtec

Product Design Engineer

New Albany, IN · On-site

$119K - $143K/yr

Make significant contributions to design, development, and validation of connector solutions ... Engineering Design Software: SolidWorks, AutoCAD, etc. * Simulation Software: FEA, CFD/Thermal ...

Geologics

Design Engineer

Orlando, FL

$55 - $65/hr

Design Engineer Client: Top Aerospace and Defense company Location: Orlando, Florida Schedule: 4/10 ... Must have at least 3 years of hands-on experience with CCA board mechanical design, connector ...

Geologics

Design Engineer

Orlando, FL

$55 - $65/hr

Design Engineer Client: Top Aerospace and Defense company Location: Orlando, Florida Schedule: 4/10 ... Must have at least 3 years of hands-on experience with CCA board mechanical design, connector ...

Apple

Product Design Engineer - Interconnect

San Diego, CA · On-site

$137K - $164K/yr

Mechanical engineering degree or equivalent; BSME or higherAnalytical and problem solving skills as ... with connector design, liquid and dust ingress protection, corrosion, and/or signal ...

ABBTECH

Design Engineer

Orlando, FL · On-site

$60 - $65/hr

Circuit Design Engineer Location- Orlando, FL 4/10hr shifts This program requires US Citizenship If ... Must have at least 3 years of hands on experience with CCA board mechanical design, connector ...

next page

Showing results 1-20

All JobsConnector Design Engineer Jobs

Connector Design Engineer information

See salary details

$40.5K

$88.2K

$158.5K

How much do connector design engineer jobs pay per year?

As of Jun 17, 2026, the average yearly pay for connector design engineer in the United States is $88,150.00, according to ZipRecruiter salary data. Most workers in this role earn between $68,000.00 and $98,500.00 per year, depending on experience, location, and employer.

What are Connector Design Engineers?

Connector Design Engineers are professionals who specialize in designing and developing electrical connectors used in various industries, such as automotive, aerospace, electronics, and telecommunications. Their role involves creating detailed designs, selecting suitable materials, and ensuring that connectors meet mechanical, electrical, and environmental requirements. They collaborate with cross-functional teams to optimize connector performance, reliability, and manufacturability. Additionally, they may be involved in testing prototypes, troubleshooting design issues, and supporting the manufacturing process.

What are the key skills and qualifications needed to thrive as a Connector Design Engineer, and why are they important?

To thrive as a Connector Design Engineer, you need a strong background in mechanical or electrical engineering, CAD proficiency, and a solid understanding of materials and manufacturing processes, typically supported by a relevant engineering degree. Familiarity with design software like SolidWorks or AutoCAD, industry standards (such as IPC or MIL specifications), and simulation tools is often required. Attention to detail, problem-solving abilities, and effective communication are crucial soft skills for collaborating with cross-functional teams and addressing design challenges. These skills ensure that connectors are designed to meet stringent performance, reliability, and safety requirements in various applications.

What are some common challenges Connector Design Engineers face when collaborating with cross-functional teams?

Connector Design Engineers often work closely with manufacturing, quality assurance, and product development teams to ensure their designs meet performance, cost, and manufacturability requirements. A common challenge is balancing strict technical specifications with real-world production constraints, which may require iterative design adjustments and clear communication. Navigating differing priorities between departments—such as design ideals versus manufacturability or cost targets—requires strong negotiation and problem-solving skills. Successful Connector Design Engineers are proactive in gathering input early and maintaining open lines of communication throughout the project lifecycle.

What is the difference between Connector Design Engineer vs Electrical Design Engineer?

AspectConnector Design EngineerElectrical Design Engineer
Required CredentialsBachelor's in Mechanical/Electrical Engineering, relevant certificationsBachelor's in Electrical Engineering, PE license often preferred
Work EnvironmentManufacturing, product development, R&DPower systems, circuit design, electronics development
Industry UsageAutomotive, aerospace, consumer electronicsPower utilities, electronics, telecommunications
Common Search/ComparisonDesigning physical connectors and interfacesDesigning electrical circuits and systems

The Connector Design Engineer focuses on creating physical connectors used in various products, ensuring mechanical and electrical compatibility. In contrast, the Electrical Design Engineer specializes in designing electrical systems and circuits. Both roles require engineering degrees and relevant certifications but serve different aspects of product development and industry applications.

More about Connector Design Engineer jobs
What are the most commonly searched types of Connector Design Engineer jobs? The most popular types of Connector Design Engineer jobs are:
What states have the most Connector Design Engineer jobs? States with the most job openings for Connector Design Engineer jobs include:
What job categories do people searching Connector Design Engineer jobs look for? The top searched job categories for Connector Design Engineer jobs are:
Connector Design Engineer jobs near you
Infographic showing various Connector Design Engineer job openings in the United States as of June 2026, with employment types broken down into 99% Full Time, and 1% Contract. Highlights an 87% Physical, 5% Hybrid, and 8% Remote job distribution, with an average salary of $88,150 per year, or $42.4 per hour.
Product Design Engineer

Product Design Engineer

Samtec, Inc

Columbia, SC

$119K - $143K/yr

Full-time

Posted 24 days ago

Samtec rating

8.4

Company rating: 8.4 out of 10

Based on 8 frontline employees who took The Breakroom Quiz

22nd of 139 rated electronics manufacturers

Job description

Founded in 1976, Samtec is a privately held, $950 million global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec’s global presence enables its unmatched customer service. 
** THIS POSITION WILL BE LOCATED ONSITE AT SAMTEC - COLUMBIA, SC **

Summary/Objective:  The Product Engineer designs and develops within New Product or Sustaining Product Engineering. 

Essential Functions/ Responsibilities: 
  1. Developing & writing the Engineering inputs for technical documentation; and adhere to all corporate engineering standards including but not limited to documentation, file management, part modeling, and part simulation.
  2. Works directly with Marketing and Sales to review opportunities and develop engineering cost analyses based on Product Scopes, work directly with purchasing, quality, manufacturing engineering, test engineering, process engineering, electroplating, suppliers, and other necessary groups as a cross-functional team to develop products and solutions.
  3. Make significant contributions to design, development, and validation of connector solutions (including but not limited to board, cable, power, high speed, and panel mount products).
  4. Works hands on to identify problems during new product development and/or when quality concerns arise.
  5. Effective use of Office365 including Outlook, Excel, PPT, SharePoint, etc. 
  6. Work effectively with different levels and individuals inside and outside of the organization.
“The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities” 
Required Experience 
  1. 3 – 5 Year’s experience in connector design/manufacturing required. 
    • Component, assembly design, and manufacturing experience may be consider in lieu of this. 
  2. Engineering Design Software: SolidWorks, AutoCAD, etc. 
  3. Simulation Software: FEA, CFD/Thermal Modeling, etc. is preferred, but not required. 
  4. Must be able to handle multiple projects simultaneously as priorities can change quickly. 
  5. Must have excellent communication, collaboration, and organizational skills. 
  6. Must be able to sit/stand for at least 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs.

Preferred Education:
  1. Bachelor’s Degree in Mechanical Engineering, Electrical Engineering, or equivalent is required
SAMTEC logo

About SAMTEC

Sourced by ZipRecruiter

Industry

Electrical equipment, appliance, and component manufacturing

Company size

1,001 - 5,000 Employees

Headquarters location

New Albany, IN, US

Year founded

1976

Social media

FacebookTwitter

View All SAMTEC Jobs

Apply