ZipRecruiter

Log In

1

Building Code Inspector Jobs in Winterville, NC (NOW HIRING)

MGB Services

Plumber

Greenville, NC · On-site

... with plumbing codes and safety practices. Essential Duties and Responsibilities: * Install ... Read and interpret blueprints, building plans, and plumbing schematics to plan jobs. * Cut, thread ...

Farrior Steel Works

Structural Engineer

Farmville, NC · On-site

$105K - $150K/yr

Conduct forensic investigations, field inspections, site surveys, and construction observation to ... Monitor projects for compliance with environmental regulations, building, and safety codes.

Senior Living Hiring

Plumber

Greenville, NC · On-site

... with plumbing codes and safety practices. Essential Duties and Responsibilities: * Install ... Read and interpret blueprints, building plans, and plumbing schematics to plan jobs. * Cut, thread ...

Farrior Steel Works

Structural Engineer

Farmville, NC · On-site

$105K - $150K/yr

Conduct forensic investigations, field inspections, site surveys, and construction observation to ... Monitor projects for compliance with environmental regulations, building, and safety codes.

Apply Early

MGB Services

Plumber

Greenville, NC · On-site

... with plumbing codes and safety practices. Essential Duties and Responsibilities: * Install ... Read and interpret blueprints, building plans, and plumbing schematics to plan jobs. * Cut, thread ...

Apply Early

MGB Services

Commercial HVAC Contractor

Greenville, NC · On-site

$27 - $34.75/hr

Ensure compliance with NC Building & Mechanical Codes, ASHRAE standards, and DHHS requirements ... Pull permits, coordinate inspections, and maintain required documentation * Provide detailed ...

Apply Early

MGB Services

Commercial HVAC Contractor

Greenville, NC · On-site

$27 - $34.75/hr

Ensure compliance with NC Building & Mechanical Codes, ASHRAE standards, and DHHS requirements ... Pull permits, coordinate inspections, and maintain required documentation * Provide detailed ...

Monro

Technician

Greenville, NC · On-site

$15 - $18/hr

Audit courtesy inspections performed by the General Service Technicians * Assist in inventory ... codes and ANSI/OSHA standards. Consistent use of all required safety standards set forth in ...

Monro

Technician

Greenville, NC · On-site

ASE certification and State Inspection license (where applicable) preferred. * Must possess a ... codes and ANSI/OSHA standards. Consistent use of all required safety standards set forth in ...

Ross Stores

Area Supervisor

Greenville, NC · On-site

Responsible for security of building including entrance/exit control (Associate entry/egress ... Conducts "Code 50" package inspections. * Executes all Company Best Practices and maximizes ...

Ross Stores

Area Supervisor

New Bern, NC · On-site

Responsible for security of building including entrance/exit control (Associate entry/egress ... Conducts "Code 50" package inspections. * Executes all Company Best Practices and maximizes ...

Ross Stores, Inc

Area Supervisor

New Bern, NC · On-site

Responsible for security of building including entrance/exit control (Associate entry/egress ... Conducts "Code 50" package inspections. * Executes all Company Best Practices and maximizes ...

Ross Stores, Inc

Area Supervisor

Greenville, NC · On-site

Responsible for security of building including entrance/exit control (Associate entry/egress ... Conducts "Code 50" package inspections. * Executes all Company Best Practices and maximizes ...

Ross Stores

Area Supervisor

New Bern, NC

Responsible for security of building including entrance/exit control (Associate entry/egress ... Conducts "Code 50" package inspections. * Executes all Company Best Practices and maximizes ...

Ross Stores

Area Supervisor

Greenville, NC · On-site

Responsible for security of building including entrance/exit control (Associate entry/egress ... Conducts "Code 50" package inspections. * Executes all Company Best Practices and maximizes ...

next page

Showing results 1-20

All JobsBuilding Code Inspector JobsBuilding Code Inspector Jobs in Winterville, NC

Building Code Inspector information

See Winterville, NC salary details

$27K

$57.9K

$86.8K

How much do building code inspector jobs pay per year?

As of Jul 4, 2026, the average yearly pay for building code inspector in Winterville, NC is $57,894.00, according to ZipRecruiter salary data. Most workers in this role earn between $47,200.00 and $66,600.00 per year, depending on experience, location, and employer.

What Does a Building Code Inspector Do?

A building code inspector assesses structures to ensure that they meet all local and state requirements. In this role, you travel to different buildings and inspect them for structural integrity and safety. In addition to the overall construction, you examine components of the building, such as exits, plumbing, heating, electrical, and fire safety systems. Your job duties include documenting your findings and issuing a report to relevant authorities. If you have proper licensure, you can issue a violation notice to the building owner; you explain the issue and tell them how to fix it so that the building is up to code.

What are Building Code Inspectors?

Building Code Inspectors are professionals who examine construction projects to ensure they comply with local, state, and federal building codes and regulations. They inspect structures at various stages of construction, renovation, or repair to verify that all work meets safety, design, and zoning requirements. Their role helps protect public safety by ensuring buildings are structurally sound and safe for occupancy. Building Code Inspectors often specialize in areas such as electrical, plumbing, or fire safety, depending on their training and certification.

What are some common challenges Building Code Inspectors face on the job?

Building Code Inspectors often encounter challenges such as keeping up with frequent changes in building codes and regulations, managing a busy inspection schedule, and handling situations where builders or property owners may not agree with inspection findings. Communication skills are essential, as inspectors regularly need to explain code requirements and corrective actions to diverse stakeholders. Additionally, balancing thoroughness with efficiency is key to ensuring safety without causing unnecessary project delays.

How much do building inspectors make?

Building inspectors in North Carolina typically earn an average annual salary of around $50,000 to $60,000, depending on experience, certifications, and location. Entry-level inspectors may start lower, while experienced professionals with advanced certifications can earn higher wages. Salaries can also vary based on the complexity of inspections and the employing agency or company.

Are building inspectors in high demand?

Building inspectors are generally in steady demand due to ongoing construction, renovation, and safety regulations. Employment for this role is expected to grow as building codes become more complex and enforcement increases, often requiring certifications and knowledge of local codes.

What kind of inspectors make the most money?

Building code inspectors with specialized certifications, extensive experience, or who work in high-demand regions tend to earn higher salaries. Inspectors overseeing commercial or complex construction projects often make more than those inspecting residential buildings. Advanced knowledge of building codes and the ability to handle complex inspections can also lead to higher pay.

What is required to become a Building Inspector?

To become a building inspector, candidates typically need a high school diploma or equivalent, relevant work experience in construction or building trades, and often must obtain certification or licensing from state or local authorities. Additional training in building codes, safety standards, and inspection procedures is usually required, along with strong attention to detail and knowledge of building materials and systems.

What is the difference between Building Code Inspector vs Building Inspector?

AspectBuilding Code InspectorBuilding Inspector
CertificationsTypically requires ICC or state-specific building code certificationsOften requires similar certifications, may vary by jurisdiction
Work EnvironmentInspects new construction, renovations, and existing buildings for code compliancePerforms inspections during various construction phases and existing building assessments
Employer & IndustryMunicipalities, government agencies, private firmsMunicipalities, construction companies, government agencies

Building Code Inspectors and Building Inspectors often perform similar roles, focusing on ensuring construction and buildings meet safety codes. The main difference lies in terminology used by different regions or jurisdictions, but both roles require comparable certifications and work environments.

What are the key skills and qualifications needed to thrive as a Building Code Inspector, and why are they important?

To thrive as a Building Code Inspector, you need expertise in construction practices, building codes, and safety regulations, typically backed by relevant certifications or a background in architecture, engineering, or construction. Familiarity with inspection management software and digital reporting tools is crucial, along with certifications such as ICC or state licensure. Strong attention to detail, critical thinking, and effective communication skills help in identifying code violations and working with contractors or property owners. These skills ensure buildings are safe, compliant, and built to standard, protecting public welfare and minimizing legal risks.
More about Building Code Inspector jobs
What cities near Winterville, NC are hiring for Building Code Inspector jobs? Cities near Winterville, NC with the most Building Code Inspector job openings:
Building Code Inspector jobs near you
Infographic showing various Building Code Inspector job openings in Winterville, NC as of June 2026, with employment types broken down into 1% Internship, 4% As Needed, 37% Full Time, 40% Part Time, 2% Temporary, and 16% Contract. Highlights an 92% Physical, 2% Hybrid, and 6% Remote job distribution, with an average salary of $57,894 per year, or $27.8 per hour.
Structural Engineer

Structural Engineer

Jack A. Farrior, Inc.

Farmville, NC • On-site

Full-time

Posted yesterday

Job description

Jack A. Farrior, Inc. is a growing construction firm in eastern North Carolina specializing in agricultural and industrial equipment installation and millwright services.

Full-time, Salary Exempt


Job Description Summary

This position is responsible for all aspects of project layout, design, and production of construction drawings and documents. The engineer will be responsible for multiple ongoing projects at various stages in the estimating, construction, and closeout cycle.

Essential Functions

  1. Lead and manage structural design projects for industrial, commercial, and manufacturing clients, ensuring technical excellence, regulatory compliance, and ontime delivery.

    Key Responsibilities

    • Lead structural engineering design for steel, CMU, and reinforced concrete systems from concept through construction.
    • Prepare, review, and seal engineering calculations, construction drawings, and technical reports.
    • Develop material takeoffs and fabrication cost estimates; coordinate with fabricators to support shop drawing and fabrication processes.
    • Conduct forensic investigations, field inspections, site surveys, and construction observation to verify design intent and code compliance.
    • Coordinate project scope and deliverables with architects, planners, surveyors, permitting agencies, contractors, and internal teams.
    • Ensure plans meet local, state, and federal regulations and industry standards; review and approve permit submissions.
    • Assist with project scheduling, budgeting, resource allocation, and task delegation to meet milestones.
    • Participate in client meetings, prepare proposals, and represent the firm at project coordination meetings.
    • Review and approve subcontractor/vendor payment applications and related invoices.
    • Monitor projects for compliance with environmental regulations, building, and safety codes.

    Qualifications

    • Licensed Professional Engineer (PE) in North Carolina, or eligible for NC registration via reciprocity.
    • Master's degree in civil engineering with a structural concentration is accepted if the candidate is on track for licensure within two years.
    • Minimum 5 years' relevant experience in the construction industry (agricultural, commercial, or industrial projects).
    • At least 3 years' experience in estimating and project management.
    • Strong technical writing, communication, and clientfacing skills; proficiency with structural analysis and drafting software.

    Preferred

    • Experience with forensic engineering, fabrication/shop drawing coordination, and permitting for industrial facilities.
    • Demonstrated ability to lead multi-disciplinary teams and deliver projects on time and within budget.
    ating and project management.

Apply