ZipRecruiter

Log In

1

Apprentice Rigger Jobs in Houston, TX (NOW HIRING)

FABCO LLC

ROD BUSTER APPRENTICE-TX

Houston, TX

$19/hr

Apprentices of this skilled trade enroll in a time-based program for 2 years with an on the job ... Flagging/Rigging rebar (trained personnel) * Adhere to all FABco safety rules and policies

FABCO LLC

ROD BUSTER APPRENTICE-TX

Houston, TX · On-site

$19/hr

Apprentices of this skilled trade enroll in a time-based program for 2 years with an on the job ... Flagging/Rigging rebar (trained personnel) * Adhere to all FABco safety rules and policies

TNT Crane & Rigging

Administrative Assistant

Houston, TX

$17.25 - $23.25/hr

TNT Crane & Rigging Inc. Job Title: Administrative Assistant, Training Department Location: Houston ... Responsibilities : • Registers apprentices in RAPIDS and maintains accurate, up-to-date ...

Posted today

Trans western

Apprentice Engineer

Houston, TX · On-site

The Apprentice Engineer is responsible for completing work orders, grounds maintenance, painting ... rigging/lifting device. * May be required to work extended periods of time without relief when ...

Transwestern

Apprentice Engineer

Houston, TX · On-site

The Apprentice Engineer is responsible for completing work orders, grounds maintenance, painting ... rigging/lifting device. * May be required to work extended periods of time without relief when ...

TNT Crane & Rigging

Trainer

Houston, TX

TNT Crane & Rigging Inc. is seeking an experienced full-time Training Instructor to join our ... Qualifications : • Experience with apprenticeship programs preferred. • Familiar with Adult ...

Posted today

UPerio USA, LLC

Tower Crane Operator

Houston, TX · On-site

Several years of construction experience, preferably with hoisting, rigging or heavy-equipment operations. * Completion of a formal tower crane training program and apprenticeship is highly preferred.

Bigge

Master Hoist Technician

Houston, TX

Introduction Bigge Crane and Rigging has been elevating America since 1916. With over 1,800 cranes ... apprentices. * Assist with training technicians on proper inspection, diagnostic, repair ...

New

RMS Fusion

1st Shift Machinist

Houston, TX · On-site

$20.25 - $27.75/hr

Safely assist with the rigging, lifting, loading, and positioning of large components using ... An equivalent combination of apprenticeship and demonstrated experience could still be accepted.

New

NRG

Mechanic

Thompsons, TX · On-site

Sets up rigging for installing and removing equipment * Identify and order proper materials for job ... Works with apprentice mechanics and skill enhancement employees to teach proper, safe use of tools ...

NRG Energy

Mechanic

Thompsons, TX · On-site

Sets up rigging for installing and removing equipment * Identify and order proper materials for job ... Works with apprentice mechanics and skill enhancement employees to teach proper, safe use of tools ...

NRG

Mechanic

Thompsons, TX

Sets up rigging for installing and removing equipment * Identify and order proper materials for job ... Works with apprentice mechanics and skill enhancement employees to teach proper, safe use of tools ...

NRG Energy

Mechanic

Thompsons, TX

Sets up rigging for installing and removing equipment * Identify and order proper materials for job ... Works with apprentice mechanics and skill enhancement employees to teach proper, safe use of tools ...

NRG Energy

Mechanic

Thompsons, TX · On-site

Sets up rigging for installing and removing equipment * Identify and order proper materials for job ... Works with apprentice mechanics and skill enhancement employees to teach proper, safe use of tools ...

NRG Energy

Mechanic

Thompsons, TX · On-site

Sets up rigging for installing and removing equipment * Identify and order proper materials for job ... Works with apprentice mechanics and skill enhancement employees to teach proper, safe use of tools ...

NRG

Mechanic

Thompsons, TX · On-site

Sets up rigging for installing and removing equipment * Identify and order proper materials for job ... Works with apprentice mechanics and skill enhancement employees to teach proper, safe use of tools ...

next page

Showing results 1-20

All JobsApprentice Rigger JobsApprentice Rigger Jobs in Houston, TX

Apprentice Rigger information

See Houston, TX salary details

$14

$21

$23

How much do apprentice rigger jobs pay per hour?

As of Jul 31, 2026, the average hourly pay for apprentice rigger in Houston, TX is $21.47, according to ZipRecruiter salary data. Most workers in this role earn between $21.35 and $23.41 per hour, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as an Apprentice Rigger, and why are they important?

To thrive as an Apprentice Rigger, you need basic mechanical aptitude, physical fitness, and a high school diploma or equivalent, often supported by safety training certifications. Familiarity with rigging equipment, hand and power tools, and understanding safety systems like OSHA guidelines are commonly required. Strong teamwork, attention to detail, and effective communication help ensure safe and efficient operations on-site. These skills and qualities are crucial for preventing accidents and supporting smooth lifting and assembly tasks in construction and industrial settings.

What are the typical challenges faced by an Apprentice Rigger, and how can they be addressed?

Apprentice Riggers often face challenges such as adapting to physically demanding work, learning proper safety procedures, and understanding how to use a variety of rigging equipment. It's common to work at heights or in adverse weather conditions, so staying vigilant and proactive about safety is essential. Effective communication and teamwork are also crucial, as riggers frequently coordinate with crane operators, engineers, and other trades. Seeking guidance from experienced riggers and participating in ongoing training can help apprentices overcome these challenges and build confidence in their skills.

What is the difference between Apprentice Rigger vs Rigger?

AspectApprentice RiggerRigger
CertificationsBasic safety and rigging certifications, on-the-job trainingAdvanced rigging certifications, experience-based
Work EnvironmentSupervised, training-focused, construction or industrial sitesIndependent, complex rigging tasks, construction, entertainment, or industrial sites
Job ResponsibilitiesAssisting with rigging setup, learning safety protocolsPerforming rigging, setting up heavy equipment, ensuring safety standards

In summary, an Apprentice Rigger is in training, focusing on learning rigging basics under supervision, while a Rigger has more experience and handles complex rigging tasks independently.

What are Apprentice Riggers?

Apprentice Riggers are entry-level workers who assist experienced riggers in setting up and securing heavy loads for lifting, moving, or construction projects. They learn to use ropes, pulleys, cranes, and other equipment to safely lift and transport materials. Apprentice Riggers typically work under supervision while gaining hands-on experience and training in safety protocols, load calculations, and proper rigging techniques. Their role is essential in industries like construction, shipping, and entertainment, where precise and secure handling of heavy objects is required.
What are the most commonly searched types of Rigger jobs in Houston, TX? The most popular types of Rigger jobs in Houston, TX are:
What are popular job titles related to Apprentice Rigger jobs in Houston, TX? For Apprentice Rigger jobs in Houston, TX, the most frequently searched job titles are:
What job categories do people searching Apprentice Rigger jobs in Houston, TX look for? The top searched job categories for Apprentice Rigger jobs in Houston, TX are:
What cities near Houston, TX are hiring for Apprentice Rigger jobs? Cities near Houston, TX with the most Apprentice Rigger job openings:
Apprentice Rigger jobs near you
Infographic showing various Apprentice Rigger job openings in Houston, TX as of July 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution, with an average salary of $44,655 per year, or $21.5 per hour.

ROD BUSTER APPRENTICE-TX

FABCO LLC

Houston, TX

$19/hr

Other

Re-posted 18 days ago

Job description

Reinforcing Ironworkers position and secure steel bars or mesh in concrete forms in order to reinforce concrete using a variety of fasteners, rod-bending machines, blowtorches, and hand tools.

Apprentices of this skilled trade enroll in a time-based program for 2 years with an on the job learning attainment of 4,000 hours, supplemented by the minimum required 288 hours of related instruction. All training and coursework are provided by the company.

Apprentices may begin at a pay rate of $19.00 per hour and receive regular increases in pay based on completion of on the job learning requirements. Once all related instruction and on the job learning is completed, the minimum wage for a graduate of the apprenticeship program is $25.00 per hour.

Rates may be negotiable based on prior experience. Credit for previous training and certifications may also be applied to new apprentice enrollments with satisfactory evidence of certifications on a case-by-case basis.

For inquiries into enrolling as a Reinforcing Ironworker Apprentice, or questions regarding our programs, please email Apprenticeship@fabcous.com.

This role may include, but is not limited to, the following typical duties:

  • Determine quantities, sizes, shapes, and locations of reinforcing rods from blueprints, sketches, or oral instructions
  • Review blueprints or specifications to determine work requirements
  • Space and fasten together rods in forms according to blueprints, using wire and pliers
  • Position and secure steel bars, rods, cables, or mesh in concrete forms, using pliers, rod-bending machines, acetylene torches, or hand tools
  • Cut rods to required lengths, using gas power saw, bar cutters, or acetylene torches
  • Cut metal components for installation
  • Place blocks under rebar to hold the bars off the deck when reinforcing floors
  • Position safety or support equipment
  • Cut and fit wire mesh or welded wire fabric in concrete to reinforce concrete
  • Cut metal components for installation
  • Bend steel rods with hand tools or rod-bending machines
  • Some travel may be required
  • Inventory materials as required
  • Order of materials as required
  • Cleaning cables to prep stressing procedures
  • Stressing cables with a use of a stressing jack
  • Lifting over 50 pounds, bending, stooping, and reaching
  • Standing/walking for a long period of time
  • Climbing/descending ladders, working on heights
  • Setting column cages, pier cages and wall reinforcement
  • Flagging/Rigging rebar (trained personnel)
  • Adhere to all FABco safety rules and policies
  • Housekeeping

Minimum Hiring Requirements

1. Age & Legal Work Authorization

  • Must be at least 18 years of age
  • Must be legally authorized to work in the United States

2. Education

  • High school diploma or GED preferred

3. Physical Requirements

  • Ability to lift 50+ pounds repeatedly
  • Able to work in physically demanding environments (standing, bending, climbing, working at heights)
  • Capable of working outdoors in varying weather conditions

4. Transportation

  • Reliable transportation to and from job sites
    • Job sites may vary, and some travel is required.

Soft Skills

  • Willingness to learn and follow instructions
  • Dependability and punctuality
  • Strong work ethic and teamwork
  • Comfort with heights and confined spaces
  • Safety-conscious mindset

Apply