ZipRecruiter

Log In

Power Design
Power Design

66 Power Design Electrical Designer Jobs Hiring Near You

Konik

Electrical Designer

Saint Paul, MN · On-site

$90K - $130K/yr

Minimum 5 years of electrical design experience, including power distribution, lighting, and low ... Experience designing fire alarm systems preferred. * Excellent analytical, communication, and ...

Power Design

Senior Electrical Engineer

Saint Petersburg, FL · On-site

$101K - $132K/yr

Our Engineering team is proof that the Power Design "work hard, play hard" motto works! With ... The senior electrical designer interprets electrical design requirements and designs electrical ...

Futures Consulting

Be Seen First

Electrical Design Engineer

Chattanooga, TN · On-site

$70K - $90K/yr

Electrical Designer - MEP Consulting Location: Chattanooga, TN Join a Leading MEP Consulting ... Design power distribution, lighting, and electrical systems for large-scale facilities

Futures Consulting

Be Seen First

Electrical Design Engineer

Chattanooga, TN · On-site

$70K - $90K/yr

Electrical Designer - MEP Consulting Location: Chattanooga, TN Join a Leading MEP Consulting ... Design power distribution, lighting, and electrical systems for large-scale facilities

Futures Consulting

Be Seen First

Electrical Design Engineer

Chattanooga, TN · On-site

$70K - $90K/yr

Electrical Designer - MEP Consulting Location: Chattanooga, TN Join a Leading MEP Consulting ... Design power distribution, lighting, and electrical systems for large-scale facilities

Futures Consulting

Be Seen First

Electrical Design Engineer

Chattanooga, TN · On-site

$70K - $90K/yr

Electrical Designer - MEP Consulting Location: Chattanooga, TN Join a Leading MEP Consulting ... Design power distribution, lighting, and electrical systems for large-scale facilities

Fort Point

Electrical Designer

Reading, PA

Senior Electrical Designer As a Senior Electrical Wiring Designer supporting our Power business ... Independently execute complex design assignments for power generation projects using advanced ...

previous pagenext page

Showing results 21-40

All JobsPower Design JobsPower Design Electrical Designer Jobs

Power Design Jobs Information

What makes Power Design an attractive place to work?

Power Design is a reputable company in the industry, known for its commitment to delivering innovative and efficient power solutions. The company's workplace is characterized by a collaborative environment that fosters creativity, open communication, and a culture of continuous learning, with opportunities for professional growth and development. Joining Power Design offers the chance to contribute to the development of cutting-edge technologies and be part of a dynamic team that values innovation, teamwork, and employee growth.
What other companies are hiring for Electrical Designer jobs?
What are the most popular jobs at Power Design?
What are the most popular categories at Power Design?
Infographic showing various Electrical Designer job openings at Power Design in the United States as of August 2026, with employment types broken down into 100% Full Time. Highlights an 96% Physical, 2% Hybrid, and 2% Remote job distribution.

Power Design Electrical Engineer II

Raytheon

Huntsville, AL

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 29 days ago

Raytheon rating

9.1

Company rating: 9.1 out of 10

Based on 99 frontline employees who took The Breakroom Quiz

2nd of 538 rated manufacturers

Job description

Date Posted:

2026-03-13

Country:

United States of America

Location:

US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATH

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

We are seeking a professional Power Design Electrical Engineer to assume a key role within the System Power, Analog and Controls Department. 
 
Do you enjoy power converter design? 
Do early-career engineers come to you for technical guidance? 
Do you have a strong desire to work on projects that are critical to the defense of our nation? 
  
If your answers are yes, we are looking for you to join our team!

 
 What You Will Do

  • Design, analyze (including thermal considerations), simulate, and test power conversion circuitry potentially utilizing any standard non-isolated power conversion topologies (buck, boost, buck-boost) including modules and discrete designs.  

  • Guide Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation. 

  • Perform design work within the bounds of a given schedule. 

  • Present reviews of technical data to program leadership and technical staff. 


Qualifications You Must Have

  • Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior 
    relevant experience

  • Minimum of 2 years of professional experience in design, analysis, simulation, and/or test experience with linear converters. 

  • Experience with any of the following non-isolated converter topologies:  buck, boost, buck-boost.    

  • Experience with design, analysis, and test with analog electronic design and analysis, including FET, BJT, and/or Op-amp circuits. 

Qualifications We Prefer

  • Lab experience specific to power electronics and/or controls electronics 

  • Demonstrated use of software tools for electrical circuit simulation and/or printed circuit board layout   

  • Demonstrated ability to document designs and circuit performance verification 

  • Understanding of fundamental power conversion concepts, components, and techniques 

  • Demonstrated understanding of linear controls and motor drive techniques. 

  • Basic understanding of commonly used power converter and/or motor drive control schemes 

  • Design, analysis, and/or test experience with any of the following isolated converter topologies:  flyback, half-bridge, full-bridge, and/or push-pull.  Design scope will ideally include stability. 

  • Experience with performing circuit card assembly-level power architecture trades, and/or with system-level power architecture trades, including power converter specification development experience. 

  • Professional experience guiding Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation (direct experience with such tools is adequate to fulfill this requirement). 

  • Familiarity with circuit simulator SIMPLIS, Saber and/or analysis tool Mathcad. 

  • Experience with Mentor Graphics DxDesigner, and/or Hyperlynx. 

  • Experience with acting as a liaison between program and functional management. 

  • Experience with digital power control. 

  • Experience with military specifications. 

  • Experience with transformer and inductor design considerations. 

  • Design experience with Electro-Magnetic Interference (EMI) concerns. 

  • Design experience with voltages > 400V and/or power > 10kW. 

  • Experience with program management tools such as Earned Value. 

  • Experience with proposal development. 

  • Ability to design to meet concerns of adjacent disciplines, such as thermal, structural, mechanical, reliability, and quality. 

  • Ability to be a self-starter and be able to function in a dynamic environment. 

  • Strong interpersonal, leadership, communication, and time management skills. 


What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

This positions is onsite in Huntsville, AL and is eligible for relocation assistance.

Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?

Huntsville Location information: https://www.huntsville.org/

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

What Raytheon employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply