ZipRecruiter

Log In

1

Wireless Communications Engineer Jobs in Florida

Mini-Circuits

Product Engineer Manager

Hialeah, FL · On-site

$150K - $175K/yr

... wired and wireless communications applications. Our products are also used in detection ... The Senior Product Engineer for the µCeramIQ Business Units (BU) is a manufacturing-focused ...

Mini-Circuits Careers

Quality Engineer

Hialeah, FL

$93K - $100K/yr

... wired and wireless communications applications. Our products are also used in detection ... Quality Engineer promotes defect prevention in products and processes, evaluates manufacturing ...

Raytheon

Principal RF Data Link Engineer

Orlando, FL · On-site

This position focuses on designing and testing wireless communication and data link systems ... Provide engineering support through participation in project design reviews, peer reviews ...

Raytheon

Senior RF Data Link Engineer

Orlando, FL · On-site

This position focuses on designing and testing wireless communication and data link systems ... Provide engineering support through participation in project design reviews, peer reviews ...

Raytheon

Senior RF Data Link Engineer

Miami, FL · On-site

This position focuses on designing and testing wireless communication and data link systems ... Provide engineering support through participation in project design reviews, peer reviews ...

Qorvo, Inc.

Sr Application Engineer, EDA

Apopka, FL · On-site

Qorvo is seeking a Senior EDA Application Engineer to define, deploy, and support silicon design ... wireless communications. It starts with our employees. As a unified global team, we bring a ...

Mini-Circuits

Product Engineer I/II

Hialeah, FL · On-site

$75K - $90K/yr

... wired and wireless communications applications. Our products are also used in detection ... The Product Engineer I aides the design engineering team with technical and non-technical support ...

Mini-Circuits

Product Engineer I/II

Hialeah, FL · On-site

$75K - $90K/yr

... wired and wireless communications applications. Our products are also used in detection ... The Product Engineer I aides the design engineering team with technical and non-technical support ...

Qorvo, Inc.

Sr Principal Design Engineer

Apopka, FL

$168K - $218K/yr

The engineer will be responsible for leading the design and development of next generation RF ... wireless communications. It starts with our employees. As a unified global team, we bring a ...

Mini-Circuits

Quality Engineer

Hialeah, FL · On-site

$93K - $100K/yr

... wired and wireless communications applications. Our products are also used in detection ... Quality Engineer promotes defect prevention in products and processes, evaluates manufacturing ...

Qorvo, Inc.

Filter Design Engineering Intern

Apopka, FL · On-site

$31 - $42/hr

Final presentation to business leaders Qorvo's Filter Design Engineering Internships are offered in ... wireless communications. It starts with our employees. As a unified global team, we bring a ...

previous page

Showing results 41-60

All JobsWireless Communications Engineer JobsWireless Communications Engineer Jobs in Florida

Wireless Communications Engineer information

See Florida salary details

$90K

$127.6K

$153.6K

How much do wireless communications engineer jobs pay per year?

As of Sep 7, 2026, the average yearly pay for wireless communications engineer in Florida is $127,577.00, according to ZipRecruiter salary data. Most workers in this role earn between $112,100.00 and $142,700.00 per year, depending on experience, location, and employer.

What does a wireless communications engineer do?

A wireless communications engineer specializes in research, development, and implementation of wireless technology. Your duties in this career require you work with electronics, wireless phones, radio frequency tech, broadband networks and systems, and routers and modems. You work heavily in research and development as part of a project team and introduce new products and designs for a device. You also focus on improving the efficiency of existing ones. Your responsibilities include designing a system that produces optimum signal strength, speed, security, and ability on the network, and troubleshooting current networks to work at full capacity.

What does a wireless communications engineer do?

A Wireless Communications Engineer designs, develops, and maintains wireless communication systems such as cellular networks, Wi-Fi, satellite, and radio frequency systems. They work on optimizing signal transmission, improving network coverage, and ensuring reliable connectivity. Their responsibilities often include troubleshooting network issues, implementing new technologies, and collaborating with other engineers to support the growing needs of wireless communication. With the rise of 5G and IoT devices, their role is crucial in advancing modern connectivity.

What are some typical challenges a wireless communications engineer faces when working on large-scale network deployments?

Wireless Communications Engineers often encounter challenges such as managing signal interference, ensuring network coverage in complex environments, and integrating new technologies with existing infrastructure. Large-scale deployments require careful planning to optimize frequency usage, mitigate security risks, and coordinate with multiple teams like network architects and field technicians. Staying updated with evolving wireless standards and troubleshooting unexpected connectivity issues are also common aspects of the role.

Are wireless communications engineers in demand?

Wireless communications engineers are in high demand due to the ongoing expansion of mobile networks, 5G deployment, and increasing reliance on wireless technology across industries. They often require skills in RF design, network protocols, and certifications such as Cisco or IEEE standards, making their expertise valuable in telecommunications, technology, and infrastructure sectors.
More about Wireless Communications Engineer jobs

What are popular job titles related to Wireless Communications Engineer jobs in Florida?

For Wireless Communications Engineer jobs in Florida, the most frequently searched job titles are:

What job categories do people searching Wireless Communications Engineer jobs in Florida look for?

The top searched job categories for Wireless Communications Engineer jobs in Florida are:

What are popular job titles related to Wireless Communications Engineer jobs in FL?

For Wireless Communications Engineer jobs in FL, the most frequently searched job titles are:

Wireless Communications Engineer jobs near you
Infographic showing various Wireless Communications Engineer job openings in Florida as of August 2026, with employment types broken down into 1% Internship, 1% As Needed, 89% Full Time, 7% Part Time, and 2% Contract. Highlights an 91% Physical, 3% Hybrid, and 6% Remote job distribution, with an average salary of $127,577 per year, or $61.3 per hour.

Product Engineer Manager

Mini-Circuits

Hialeah, FL • On-site

$150K - $175K/yr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 13 days ago

Key responsibilities

  • Support the end-to-end NPI and productization process for RF components and modules.

  • Lead and mentor a team of Product Engineers responsible for ceramic-based RF NPIs.

  • Establish process flows, control plans, and key process parameters to ensure consistent product performance.

Job description

Description
Mini-Circuits designs, manufactures and distributes integrated circuits, modules, and sub-systems for high-performance radio frequency (RF) and microwave applications. With design, sales and manufacturing locations in over 30 countries, Mini-Circuits' products are used in a range of wired and wireless communications applications. Our products are also used in detection, measurement and imaging applications, including military communication, guidance and electronic countermeasure systems, commercial, scientific, military land, sea and aircraft; automotive systems, medical systems, and industrial test equipment.
Mini-Circuits' sells its products to over 20,000 customers globally through our direct sales force, applications engineering staff, sales representatives, as well as through our extensive website.
Position Summary:
The Senior Product Engineer for the µCeramIQ Business Units (BU) is a manufacturing-focused technical leader responsible for managing a product engineering team focused on New Product Introductions (NPI) of Radio Frequency (RF) components and modules utilizing Low Temperature Co-Fired Ceramics (LTCC) technology among others. This role owns the productization of new RF components and modules from concept through stable high-volume production, with strong emphasis on manufacturability, yield, reliability, cost, and process robustness. The position works closely with R&D and Design Engineering, Marketing, Project Management, Manufacturing Process Engineering (MPE), Machine Automation Engineering Design (MAED), Quality, Reliability, and Supply Chain to commercialize high-performance RF components and modules for markets such as Aerospace and Defense, Satellite Communications, Telecommunications, Test and Measurement, and Automotive.
Salary Range: $150,000 - $175,000 per year
Job Function:
Technical Leadership and NPI Execution
  • Lead and mentor a team of Product Engineers responsible for Ceramic-based RF component and module NPIs.
  • Support the end-to-end NPI and productization process, from requirements definition and feasibility through pilot builds, yield ramp, qualification, and production release.
  • Translate customer and market requirements into clear technical specifications with an emphasis on manufacturability, cost targets, and process capability.
  • Provide technical oversight of RF designs with focus on manufacturable architecture, robust tolerances, and process capability.
  • Review RF simulations and designs to ensure compliance with performance requirements within the boundaries of the manufacturing process capabilities.
  • Drive Design for Manufacturability (DFM), Design for Assembly (DFA), Design for Test (DFT), and Design for Reliability (DFR) best practices specific to LTCC and other Ceramic processes.
  • Define acceptable design margins and tolerances considering the manufacturing process capabilities.
  • Partner with R&D to transition new designs and technologies into repeatable manufacturing processes.
  • Act as the primary engineering interface to manufacturing, characterization, validation and verification for all µCeramIQ NPI projects.
  • Establish process flows, control plans, and key process parameters to ensure consistent electrical and mechanical performance.
  • Lead yield improvement, scrap reduction, and cost-down initiatives during pilot and production ramp phases.
  • Drive structured root cause analysis (e.g., SPC, DOE, 8D) for yield, reliability, or performance excursions.
  • Support supplier and vendor selection, development, and qualification for new and existing technologies and critical outsourced processes.
  • Define and execute electrical, mechanical, environmental, and reliability qualification plans with strong linkage to manufacturing risks and failure modes.
  • Ensure process capability and reliability targets are met prior to full production release.
  • Oversee failure analysis and corrective actions for qualification and production-related issues.
  • Ensure products and processes meet applicable regulatory, quality, and customer-specific requirements (e.g., aerospace, defense, automotive standards).
  • Support customer technical discussions, design-in activities, and post-launch technical support as needed.
  • Contribute to product roadmaps and technology development plans aligned with business strategy.
  • Drive NPI schedules with focus on manufacturing readiness, yield maturity, and on-time production release.
  • Identify and mitigate manufacturing and supply chain risks early in the development cycle.
  • Support value engineering, cost reduction, and process simplification initiatives across the product lifecycle.
  • Ensure robust documentation, configuration control, and engineering change management for manufacturing execution.
  • Own and drive key manufacturing KPIs for new and released products, including first-pass yield, final yield, scrap rate, rework rate, cycle time, and cost of poor quality (COPQ).
  • Establish process capability targets (e.g., Cp/Cpk) for critical fabrication, assembly, and test processes.
  • Track and report NPI maturity metrics such as pilot yield trends, qualification pass rates, and production readiness indicators.
  • Lead data-driven continuous improvement initiatives using KPI trends to prioritize actions and investments.

Qualifications:
  • BSc.EE or MSc.EE with Microwave Theory coursework.
  • 8+ years of experience in RF/microwave product engineering, Management and manufacturing engineering, or NPI roles.
  • 5+ years of management of a team experience required.
  • Demonstrated experience productizing RF products and leading NPIs from concept through stable production in a manufacturing environment.
  • Significant hands-on experience with RF component and module testing, characterization, and data analysis.
  • Proven experience creating and releasing RF test plans, block diagrams, and test specifications for production test and customer-facing datasheets or catalog specifications.
  • Demonstrated success correlating RF test performance across different manufacturing sites, test platforms, or external partners.
  • Proven track record of improving yield, reliability, and cost through process and test optimization.
  • Prior experience mentoring or leading engineering teams is strongly preferred.
  • Strong understanding of RF and microwave theory as applied to passive component and module manufacturing and test.
  • Expert-level understanding of RF test equipment and measurement techniques for components and modules, including multi-port S-parameter measurements, Power Handling, and others (i.e IP3, P1dB, Harmonic Rejection, Noise Figure, ACPR, EVM, Phase Noise etc.)
  • Proven experience developing RF test plans, block diagrams, and detailed test specifications for both high-volume production environments and customer-facing catalog specifications.
  • Demonstrated expertise in test setup validation, measurement uncertainty analysis, and correlation of RF test results across multiple sites, test systems, or external laboratories.
  • Solid understanding of manufacturing process control, SPC, DOE, and Root Cause analysis methodologies.
  • Working knowledge of quality systems, Phase Gate Processes (PGP) and/or Advanced Product Quality Planning (APQP) and NPI frameworks, PPAP concepts, and product qualification methodologies.

Skills and Competencies:
  • Proven technical leadership and ability to guide complex, factory-facing, cross-functional development efforts.
  • Strong analytical and problem-solving skills with a data-driven approach to yield, test, and process improvement.
  • Ability to define, standardize, and enforce RF test methodologies across manufacturing and customer-facing environments.
  • Excellent communication skills, with the ability to convey complex technical and test-related concepts to diverse audiences including customers.
  • Ability to balance technical depth with schedule, cost, yield, and business considerations.
  • High level of ownership, accountability, and attention to detail.
  • Familiarity with Statistical Analysis tools (i.e JMP, Minitab, Tableu, Matlab)
  • Experience with RF/EM simulation tools (e.g., HFSS, ADS, CST or equivalent) is a plus.
  • Familiarity with CAD tools, product lifecycle management (PLM) systems, and standard laboratory equipment.
  • Experience supporting aerospace, defense, satellite, or automotive-qualified RF products.
  • Exposure to high-reliability or harsh-environment applications.
  • Understanding of supply chain and cost drivers associated with ceramic-based RF components.

Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, sit and use hands to operate a computer keyboard. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Cultural Focus:
  • Displays enthusiasm and Passion for their work
  • Works to the standard of Uncompromising Quality by meeting or exceeding stated objectives and embracing continuous improvement
  • Exercises sound Business Judgement, ensuring that efforts are on track with the Company's goals
  • Operates with the mindset of Customer Obsession - by meeting or exceeding expectations to both internal and external customers
  • Takes Accountability by taking ownership and accepting responsibility for their conduct and contributions
  • Demonstrates a strong sense of urgency and accomplishes tasks with Speed and attention to detail
  • Cooperates, collaborates and contributes to shared goals with a strong sense of Teamwork
  • Conducts themselves with Honesty & Integrity and treats all members with Trust & Respect

Additional Requirements/Skills:
  • US Citizen or US Permanent Resident (Green Card Holder)
  • Comply, understand, and support corporate safety initiatives to ensure a safe work environment
  • Ability and willingness to abide by Company's Code of Conduct
  • Combination of office, laboratory, and manufacturing floor environments.
  • Occasional travel for customer meetings, supplier visits, or manufacturing support may be required.

Benefits:
  • We offer a comprehensive package of benefits including [paid time off, medical/dental/vision insurance and 401(k)] to eligible employees.
  • Comprehensive Medica, Dental and Vision Plans
  • 401k and Profit -Sharing Programs
  • Disability Insurance
  • Life Insurance
  • Employer-Sponsored Wellness Plans
  • Commuter Benefits
  • Hospital & Accident Indemnity Insurance
  • Employee Benefit Advocate &Employee Assistance Program

Disclaimer: The listed qualifications and requirements for each position are intended as guidelines. Mini-Circuits reserves the right to hire outside of these guidelines at Management's discretion.
Mini-Circuits is an Equal Opportunity Employer and does not discriminate on the basis of actual or perceived age, race, creed, color, national origin, sexual orientation, military status, sex, disability, predisposing genetic characteristics, marital status, familial status, gender identity, gender dysphoria, pregnancy-related condition, and domestic violence victim status or protected class characteristic, or any other protected characteristic as established by federal or state law.

Apply