ZipRecruiter

Log In

1

Trainee Line Cutter Jobs (NOW HIRING)

Sabre Industries

Welder Trainee - Telecom Nights

Conroe, TX · On-site

$18.75 - $23.75/hr

Works in confined areas at various locations on the small pole assembly line as necessary to weld ... Uses oxy-fuel cutting torch and plasma-arc torch for cutting steel. * Operates assembly ...

Sabre Industries

Welder Trainee - Telecom Days

Conroe, TX · On-site

$18.75 - $23.75/hr

Works in confined areas at various locations on the small pole assembly line as necessary to weld ... Uses oxy-fuel cutting torch and plasma-arc torch for cutting steel. * Operates assembly ...

Exyte GmbH

... and safe production of our high quality line of PSP products. Explore your tasks and ... Various grinding, cutting and welding tasks are performed within the Weld Department. Safety ...

Exyte Group

Trainee Welding Support

Burlington, VT · On-site

$22/hr

... safe production of our high quality line of PSP ® products. Explore your tasks and ... Various grinding, cutting and welding tasks are performed within the Weld Department. Safety ...

next page

Showing results 1-20

All JobsLine Cutter JobsTrainee Line Cutter Jobs

Trainee Line Cutter information

What are the best jobs you can do when injured?

For a Trainee Line Cutter or similar roles, jobs that require minimal physical activity, such as administrative tasks, quality control, or remote monitoring, are suitable when injured. These positions often involve less manual labor and can be performed with limited mobility, allowing continued employment during recovery. Employers may also offer light-duty assignments or accommodations based on the injury and job requirements.

What does a wire cutter job do?

A wire cutter job involves cutting and preparing electrical wires or cables to specified lengths using cutting tools or machinery. The role requires attention to safety protocols, knowledge of wiring standards, and often the use of hand tools or automated cutting equipment in manufacturing or construction environments.

What jobs pay 4000 a week without a degree?

A Trainee Line Cutter typically does not earn $4,000 weekly, as this role is often entry-level with lower wages. High-paying jobs that can reach or exceed $4,000 per week without a degree include skilled trades like commercial fishing, certain construction or oilfield work, and specialized transportation roles such as truck driving with experience and certifications. These jobs often require physical skills, training, or licensing but not necessarily a college degree.

What careers in the forest service do not require a degree?

Trainee Line Cutter positions in the forest service typically do not require a college degree, focusing instead on physical ability, safety training, and on-the-job instruction. Many entry-level roles in forestry, such as equipment operators or maintenance workers, also often prioritize experience and certifications over formal education.

What is the difference between Trainee Line Cutter vs Apprentice Line Cutter?

AspectTrainee Line CutterApprentice Line Cutter
CertificationsTypically requires basic safety and industry-specific trainingUsually needs similar certifications, often more advanced as training progresses
Work EnvironmentOn-site, in industrial or utility settings, often outdoorsSimilar outdoor or industrial environments, with hands-on training
Employer & Industry UsageCommon in utility, power, and telecommunications sectorsUsed interchangeably in the same sectors, sometimes indicating a more advanced stage

The main difference between a Trainee Line Cutter and an Apprentice Line Cutter lies in their training stage. Trainees are just beginning and may have basic certifications, while apprentices are further along, gaining more skills through hands-on experience. Both roles are essential in utility and industrial sectors, often overlapping in duties and work environments.

More about Trainee Line Cutter jobs
What cities are hiring for Trainee Line Cutter jobs? Cities with the most Trainee Line Cutter job openings:
What are the most commonly searched types of Line Cutter jobs? The most popular types of Line Cutter jobs are:
What states have the most Trainee Line Cutter jobs? States with the most job openings for Trainee Line Cutter jobs include:
What job categories do people searching Trainee Line Cutter jobs look for? The top searched job categories for Trainee Line Cutter jobs are:
Trainee Line Cutter jobs near you
Welder Trainee - Telecom Nights

Welder Trainee - Telecom Nights

Sabre Industries

Conroe, TX • On-site

$20/hr

Other

Medical, Dental, Vision, Life, Retirement, PTO

Posted 8 days ago

Sabre Industries rating

5.6

Company rating: 5.6 out of 10

Based on 54 frontline employees who took The Breakroom Quiz

514th of 527 rated manufacturers

Job description

Description
At Sabre Industries, we connect and power America's communities with world-class utility and telecom solutions. We reliably build a better world together; one customer, one team, and one community at a time.
Our teams live out the organization's core values of integrity, commitment, innovation, and connection. That's how we continuously exceed our high standards of enterprise excellence-by creating a space for our engaged employees to thrive.
With consistent hiring opportunities nationwide and countless career levels, chances are the next big step on your career path starts here. We work with our employees to create customized career paths and development in all facets of the organization. People will always be our greatest asset and we place emphasis on enhancing the lives of our employees.
Scope of Responsibility:
While working under the direct supervision of the Production Supervisor and the assigned lead person, the Welder C performs production within prescribed codes and according to prescribed procedures, specifications, and drawings.
Essential Duties:
  • Manually positions pole assembly in pole rollers into proper position for welding
  • Reads and interprets drawings (including weld symbols) and specifications to determine proper location of attachments, as well as weld size and configuration.
  • Must be able to read and write.
  • Adds, subtracts, multiplies, and divides feet, inches, fractions, and decimals. Uses tables to convert fractions to decimals and decimals to fractions
  • Adjusts welding machines to achieve desired results within parameters of established welding procedures. Frequently pushes pulls and lifts up to 50 pounds.
  • Uses oxy-fuel torch to pre-heat parts to be welded in accordance with published welding codes and specifications
  • Uses GMAC or FCAW welding process to weld small components or assemblies in 1G and 2F positions.
  • Understands Company specific welding procedures.
  • Tack welds and/or finish welds to required production levels.
  • Wears protective equipment, including safety glasses, insulated welding gloves, leather sleeves and/or cape and welding hood
  • Works in confined areas at various locations on the small pole assembly line as necessary to weld components described above
  • Uses chipping hammer, wire brush, motorized grinders, and motorized wire brush at various times to clean welded areas.
  • Uses pneumatic drills and magnetic drills to drill carious size holes on pole assembly as required by drawings and specifications
  • Visually inspects his/her work to identify material discrepancies and to ensure that welds have been completed satisfactorily in compliance with applicable drawings and specifications.
  • Uses overhead cranes to transport and move material. Overhead crane training will be required.
  • Uses a weld gauge to measure weld size, standard and metric
  • Reads and interprets work orders and daily production schedules.
  • Corrects labor reporting in MES system to ensure operations are complete.
  • Assists fitter in assembling pole assembly when needed. Uses measuring tape, level, square and angle finder to measure distances and angles
  • Uses oxy-fuel cutting torch and plasma-arc torch for cutting steel.
  • Operates assembly line cart system to move tubular shafts into position for cutting on band saw and for fitting. Operates band saw for cutting tubular shafts according to specifications.
  • Maintains a clean work area.
  • Properly welded and assembled poles according to the specified welding process.
  • Produces quality work in a timely manner.
  • Works safely according to OSHA standards including wearing the proper PPE to accomplish tasks.

Position Requirements:
  • High school diploma or GED equivalent preferred
  • AWS Certification required for specific Welding operations.
  • Must have passed Welder Trainee certification and be AWS certified in MIG welding to meet MT and UT inspection quality assurance.
  • Basic shop mathematical aptitude and ability to thrive in a deadline driven environment.
  • Proficient in reading complex prints and specifications.
  • Verbally communicate in English language.
  • Must possess adequate dexterity and stamina to sustain expected production effectively.
  • Knowledge and awareness of the safety issues related to each operation performed within the department.
  • Required PPE includes safety glasses, steel-toe metatarsal boots and hearing protection worn at all times on the production floor in addition to other specific PPE that must be worn for specific tasks.
  • Production floor environment may include fluctuations in temperature.
  • Must be able to stand 100% of scheduled shift. Must be able to use foot pedal to operate equipment.
  • Lifting, pushing, prying, and dragging heavy materials up to 50 pounds.
  • Must be capable of reaching, grasping, bending, stooping, crawling under or over and occasional climbing.
  • Abnormal level of noise due to grinding, chipping, hammering requires hearing protection (ear plugs) be worn at all times.

Physical Requirement:
  • Must be able to stand 100% of scheduled shift. Lifting, pushing, prying, and dragging heavy materials.
  • Must be capable of bending, stooping, crawling under or over and occasional climbing of stairs/ladders heights up to 6 or 7 feet.
  • Abnormal level of noise due to grinding, chipping, hammering requires hearing protection (ear plugs) be worn at all times.
  • Must possess adequate dexterity and stamina to sustain expected production effectively.
  • Must be able to work in fast-paced work environment
  • Must be able to lift up to 50 pounds.
  • Must be able to perform physical activities that require considerable use of arms and legs and moving entire body, such as climbing, lifting, balancing, walking, stooping, bending, twisting and handling of materials.
  • Position requires manual dexterity, arm-hand steadiness and a safety-minded individual.
  • Must be able to work in an open environment exposed to extreme temperatures.

At Sabre Industries, we invest in your future with a competitive benefits program. As a full-time employee, you are eligible for:
  • Medical, Dental & Vision coverage
  • 401(k) with Company Match
  • Continuing Education & Tuition Reimbursement
  • Life and Disability Coverage
  • Paid Time Off & Paid Holidays
  • Health and Wellness Resources
  • Employee Discounts

Sabre Industries is an Equal Opportunity Employer: M/F/Vets/Disabled/Sexual Orientation/Gender Identity

What Sabre Industries employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply