ZipRecruiter

Log In

1

Tapping Jobs in California (NOW HIRING)

LISI

GENERAL OPERATOR II-1st Shift

Hacienda Heights, CA · On-site

$23.81 - $28/hr

Drill, Milling, Trim, Tapping, Crimping, Vision, Stamping, Marking, Deburr, Manual Punch Press, EDM and Auto Assembly. General Operator II must maintain the expected level of competency for ...

LISI

GENERAL OPERATOR I-2nd Shift

Hacienda Heights, CA · On-site

$20/hr

Drilling, Milling, Trim, Tapping, Crimping, Vision, Stamping, Marking, Deburr, Manual Punch Press, EDM and Auto Assembly, and hand assembly. General Operator I must maintain the expected level of ...

Excelta Corporation

Shop Technician

Buellton, CA · On-site

$27 - $32/hr

Operate equipment including belt and wheel grinders, surface grinders, vertical mills, drilling/tapping equipment, and other shop machinery. * Assemble, fit, and modify fabricated components using ...

Machina Labs

Machine Production Technician

Chatsworth, CA · On-site

$23 - $28/hr

Execute structural upfits and modifications (drilling, tapping, cutting, deburring, touch-up finishing). * Safely rig, lift, and position heavy components (up to 15 tons) using forklifts, cranes, and ...

Excelta Corporation

Shop Technician

Buellton, CA · On-site

Operate equipment including belt and wheel grinders, surface grinders, vertical mills, drilling/tapping equipment, and other shop machinery. * Assemble, fit, and modify fabricated components using ...

Jarvio

Head of Partnerships

San Francisco, CA · On-site

Relationships are how you work, and you already have a network worth tapping. * You've built or run an affiliate, referral, or partner program before, or you're hungry to own one. * You've closed ...

Filtration Group Corp

Machine Operator

Santa Rosa, CA · On-site

$21.91/hr

Overview This position performs the tasks associated with advanced machine operation which include setup and operation of, trim presses, drilling and tapping, port and stem, vibratory systems and ...

Filtration Group Corp

Machine Operator

Santa Rosa, CA · On-site

$21.91/hr

This position performs the tasks associated with advanced machine operation which include setup and operation of, trim presses, drilling and tapping, port and stem, vibratory systems and parts ...

Hester Fabrication Inc.

Advance Welder

Hayward, CA · On-site

$30/hr

The shop is equipped with a wide range of tools, drills, cold saws, bandsaws, grinders, tapping arms, laser, press brake, overhead crane, forklift, etc. We are looking for a fabricator with the ...

BJ's Restaurants, Inc.

Take Out

Rancho Cucamonga, CA · On-site

$16.90 - $20/hr

Tapping your knowledge of our diverse menu to suggest crave-worthy food and beverage pairings. * Setting up, breaking down, and maintaining take out and curbside areas. * Correctly packaging all take ...

BJ's Restaurants, Inc.

Take Out

Irvine, CA · On-site

$16.90 - $18.50/hr

Tapping your knowledge of our diverse menu to suggest crave-worthy food and beverage pairings. * Setting up, breaking down, and maintaining take out and curbside areas. * Correctly packaging all take ...

BJ's Restaurants, Inc.

Take Out

Moreno Valley, CA · On-site

$16.90 - $20/hr

Tapping your knowledge of our diverse menu to suggest crave-worthy food and beverage pairings. * Setting up, breaking down, and maintaining take out and curbside areas. * Correctly packaging all take ...

BJ's Restaurants, Inc.

Take Out

Victorville, CA · On-site

$16.90 - $20/hr

Tapping your knowledge of our diverse menu to suggest crave-worthy food and beverage pairings. * Setting up, breaking down, and maintaining take out and curbside areas. * Correctly packaging all take ...

previous pagenext page

Showing results 21-40

All JobsTapping JobsTapping Jobs in California

Tapping information

What is tapping?

A Tapping job typically involves operating machinery to drill or cut threads into metal, plastic, or other materials. Workers in this role may use manual or automated tapping machines to ensure precise threading for fasteners, bolts, or assembly components. They must follow technical specifications, inspect finished products for quality, and maintain equipment for optimal performance. Attention to detail and knowledge of machining processes are essential for efficiency and accuracy.

What does a tapping operator do?

As a Tapping Operator, your daily responsibilities usually include setting up and operating tapping machines, monitoring the production process, adjusting machine settings, inspecting finished parts for quality, and performing basic equipment maintenance. You will often work closely with other machine operators, quality assurance personnel, and supervisors to ensure smooth workflow and meet production targets. Attention to detail and the ability to troubleshoot minor equipment issues are key parts of the role. This hands-on work environment requires both technical know-how and the ability to work collaboratively within a team.

What are the key skills and qualifications needed for tapping?

To excel as a Tapping Operator, you typically need strong mechanical aptitude, attention to detail, and experience with metalworking or industrial machinery. Familiarity with tapping machines, hand tools, blueprint reading, and often a vocational or technical certification are advantageous. Good problem-solving skills, teamwork, and a focus on workplace safety help individuals stand out. These capabilities are vital for maintaining high quality, efficient production, and a safe working environment.

What are popular job titles related to Tapping jobs in California?

For Tapping jobs in California, the most frequently searched job titles are:

What job categories do people searching Tapping jobs in California look for?

The top searched job categories for Tapping jobs in California are:

What cities in California are hiring for Tapping jobs?

Cities in California with the most Tapping job openings:

Infographic showing various Tapping job openings in California as of September 2026, with employment types broken down into 72% Full Time, and 28% Contract. Highlights an 100% In-person job distribution.

GENERAL OPERATOR II-1st Shift

Hacienda Heights, CA • On-site

LISI
Insurance Services • 51 - 200 employees
Learn more about LISIexternal

$23.81 - $28/hr

Full-time

Re-posted 16 days ago

Job description

PRIMARY SUMMARY:
The General Operator II is to perform basic set-ups, operate the production machines and properly measure the products to achieve all company targets and standards. Must be able to set up and run secondary production machines such as; Drill, Milling, Trim, Tapping, Crimping, Vision, Stamping, Marking, Deburr, Manual Punch Press, EDM and Auto Assembly. General Operator II must maintain the expected level of competency for production machines in accordance with skill assessments.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Other duties may be assigned. Reasonable accommodation for disabilities may be made for one or more of the following:
  • Performs basic set-ups and tooling changes and operates the secondary production machines after JSA trained. Has clear understanding and perform following SOP (Standard Operating Procedures), work instructions, SPC, and/or special requirements if applicable, including but not exclusive to: Drill, Milling, Trim, Tapping, Crimping, Vision, Stamping, Marking, Deburr, Sorting and Assembly.

  • Recognizes and remedies minor machine or tooling malfunctioning; make minor adjustments as necessary. Major discrepancies are reported to lead or supervisor.

  • Observes machine operation to detect work piece defects or machine malfunctions.

  • Reads blueprint or Manufacturing Order (MO) for product specification such as; dimensions, tolerances, number or parts to be formed, and tooling instruction on type tooling required.

  • Inspects product using calipers, micrometer, comparator, scales, templates, or other measuring instruments to verify conformance to blueprint or manufacturing instructions.

  • Records information such as; First article inspection, in-process inspection, number of products tested, meter readings, and dates and times of work piece production; perform SPC as required.

  • Recognize cosmetic non-conformances based on Company specifications such as; burrs, galling, cracked edges, slug marks, dimensional changes in production parts and initiate action to prevent non-conformance, in such as stopping the machine and notifying the Lead person or Supervisor.

  • Operates Shop Floor System and records MO information.

  • Perform minor machine maintenance such as; changing worn accessories, oiling and cleaning machines, dies, or parts, and adding coolant to machine reservoirs as part of daily job start/end.

  • Reports all malfunctioning equipment and non-conforming parts to Lead or Supervisors to determine course of action needed.

  • Performs record keeping, data entry, house keeping and follows safety regulations.

  • Assists less-skilled operators to develop skills and set-ups.

  • Responsible for complying with the rules and regulations set forth by Federal, Local, and State government, LISI Aerospace, and HSE Procedures

  • Follow all 5S department procedures which include but are not limited to; keeping floors clean of oil and debris, returning tools to proper locations, organize part pans, and performs other housekeeping duties.

  • Responsible for attending all training provided and for adhering to all HSE procedures, policies, and plans, conforming to reporting requirements, and safe operating procedures at all times.

  • Required to bring any known or suspected nonconformance for all company procedures or legal requirements to management's attention immediately.

  • Continually seek opportunities to improve our HSE performance by establishing objectives and targets, measuring progress, and reporting our results.

  • Works under recommended waste elimination initiatives specifically related to the manufacturing production function such as recycling opportunities to elimination or minimize production waste.

  • Performs a variety of other related duties as assigned.

Ways of working, Experience, and Behaviors
To perform the job successfully, an individual should demonstrate the following competencies:
  • Analytical - Collects and researches data; uses intuition and experience to complement data; understands work flows and procedures.

  • Technical Skills - Comprehends manufacturing processes and methods including flow, layout, assembly and production equipment.

  • Oral/Written Communication - Communicates technical documents clearly and accurately; Transfers technical data into meaningful written documents that can be understood by all levels of the organization.

  • Team Work - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests.

  • Business Acumen - Understands business implications of decisions; Aligns work with strategic goals.

  • Cost Consciousness - Works within the direction of the department's resources; Contributes to profits and revenue; Conserves organizational resources.

  • Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.

  • Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Develops realistic action plans.

  • Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments.

Supervisory Responsibilities:
This position has no supervisory responsibilities.
ESSENTIAL JOB REQUIREMENTS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience
  • High school diploma or general education degree (GED); or

  • 1 - 4 years related industrial manufacturing experience or equivalent combination of education and experience.

  • Read and interpret blueprints or other job specifications.

Computer Skills
To perform this job successfully, an individual should have knowledge of basic computer skills and departmental applications: SPC & Shop Floor System.
Language Skills
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Must be able to effectively present information in one-on-one and small group situations to Team Members of the organization.
Mathematical Skills
Ability to add and subtract six digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units and weight measurement, volume, and distance.
Reasoning Ability
Ability to comprehend detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
PHYSICAL DEMANDS, WORK ENVIRONMENT, HEALTH AND ,SAFETY
Physical Demands
The physical demands described here are representative of those that must be met by an Team Member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is frequently required to stand for extended periods of time, speak or listen, and walk. The employee is frequently required to use eye-hand coordination, repetitive hand movement and manual dexterity use hands to finger, handle, or feel. The employee must frequently bend, reach to shoulder level and lift, carrying, pushing and/or pulling up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, and ability to adjust focus. Hearing level within normal/average range.
Work Environment
The work environment characteristics described here are representative of those a Team Member encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually loud.
Safety and Environmental
The responsibilities of the position include compliance with company and governmental safety, environmental and hazardous materials regulations and procedures. Team Members will be required to wear personal safety equipment such as safety glasses, hearing protection, or proper footwear PPE in specified areas
  • Participate in the development and promotion of the HSE culture
  • Be exemplary in terms of health, safety and the environment, in particular by:
    • Respecting and ensuring respect for the instructions and rules established in the field of health, safety and the environment (in particular the LISI golden rules)
    • Immediately correcting, whenever possible, or reporting to his or her superiors and/or the HSE department, any malfunction or risky situation in the fields of health, safety and environmental protection
    • Implementing preventive actions to reduce the environmental footprint and control health and safety risks
  • Participate, upon request, in analyses (of risks, incidents) and HSE working groups related to his/her professional scope
  • Be familiar with the main health and safety risks and the main environmental impacts relating to the scope of his/her work
  • Be familiar with the site's HSE policy and objectives

To be able to make proposals for improving working conditions and limiting environmental impact
Pay Range: $23.81-28/hr.

Apply