ZipRecruiter

Log In

1

Spray Technology Jobs in Kansas (NOW HIRING)

Valence

Painter - Weekend Shift

Wichita, KS · On-site

$16.75 - $22.75/hr

Valence Surface Technologies is a full-service surface finishing company specializing in the ... Apply primers, paints, and coatings to aircraft surfaces using spray guns, brushes, and other tools.

Valence

Painter - 1st Shift

Wichita, KS · On-site

$16.75 - $22.75/hr

Valence Surface Technologies is a full-service surface finishing company specializing in the ... Apply primers, paints, and coatings to aircraft surfaces using spray guns, brushes, and other tools.

R Tech

Industrial Painter/Sandblaster

Wamego, KS · On-site

$20 - $25/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Place items or products on racks, spindles, or reel stands to coat, paint, or spray them, using hands, overhead hoist, or forklift. * Determine paint flow, viscosity, and coating quality by ...

R Tech

Industrial Painter/Sandblaster

Wamego, KS

$20 - $25/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Place items or products on racks, spindles, or reel stands to coat, paint, or spray them, using hands, overhead hoist, or forklift. * Determine paint flow, viscosity, and coating quality by ...

Valence

Lab Technician

Wichita, KS · On-site

$17.50 - $23.25/hr

Valence Surface Technologies is a full-service surface finishing company specializing in the ... Operate corrosion resistance / salt spray chamber and perform any required minor maintenance on ...

TERRACON

Construction Inspector I

Lenexa, KS · On-site

$25.25 - $35.25/hr

Associates degree in Civil Engineering Technology or Construction Engineering Technology preferred ... ICC certification (Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed ...

TERRACON

Construction Inspector I

Lenexa, KS

Associates degree in Civil Engineering Technology or Construction Engineering Technology preferred ... ICC certification (Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed ...

TERRACON

Senior Construction Inspector

Olathe, KS · On-site +1

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Associates degree in Civil Engineering Technology or Construction Engineering Technology preferred ... ICC certification (Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed ...

TERRACON

Certified Welding Inspector II

Olathe, KS · On-site +1

$35.75 - $42/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Associates degree in Civil Engineering Technology or Construction Engineering Technology preferred ... ICC certification (Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed ...

previous page

Showing results 41-60

All JobsSpray Technology JobsSpray Technology Jobs in Kansas

Spray Technology information

What is the difference between Spray Technology vs Spray Painter?

AspectSpray TechnologySpray Painter
CertificationsOften requires technical training or certifications in spray systemsTypically needs painting or finishing certifications
Work EnvironmentIndustrial settings, manufacturing plants, automotive facilitiesAuto body shops, manufacturing, construction sites
Job FocusDesign, operation, and maintenance of spray systemsApplying paint or coatings manually or with spray equipment
Industry UsageManufacturing, automotive, aerospaceAutomotive, construction, furniture finishing

Spray Technology involves operating and maintaining spray systems used in various industries, requiring technical knowledge. Spray Painters focus on applying coatings manually or with spray guns, emphasizing finishing skills. Both roles are essential in manufacturing and automotive sectors but differ in technical complexity and job focus.

What are popular job titles related to Spray Technology jobs in Kansas?

For Spray Technology jobs in Kansas, the most frequently searched job titles are:

What job categories do people searching Spray Technology jobs in Kansas look for?

The top searched job categories for Spray Technology jobs in Kansas are:

What cities in Kansas are hiring for Spray Technology jobs?

Cities in Kansas with the most Spray Technology job openings:

Spray Technology jobs near you

Spirit Defense - Experienced Aircraft Painter

Spirit AeroSystems

Wichita, KS • On-site

$16.25 - $22.25/hr

Full-time

Medical, Life, Retirement

Posted 23 days ago

Spirit AeroSystems rating

8.1

Company rating: 8.1 out of 10

Based on 84 frontline employees who took The Breakroom Quiz

42nd of 72 rated aerospace companies

Job description

Overview
This role is at Spirit AeroSystems, Inc., a wholly owned subsidiary of The Boeing Company, at Spirit's Defense Business Unit ("Spirit Defense"). Spirit Defense is an independent supplier to the defense and space marketplace. Through innovative engineering and rapid prototyping excellence, Spirit Defense provides the capabilities, technologies and support customers need to succeed in their missions.
Responsibilities
Position Responsibilities:
Responsible for the spray application of multiple aerospace paints on a variety of substrates and on simple to complex product configurations, including the set up and application of primers and finish coat. Supporting responsibilities include masking, racking, turning, and sanding operations as well as equipment maintenance and paint mixing operations.
Key Accountabilities
  • Able to read engineering blueprints, schematics and drawings.
  • Can match or detect differences among colors, including shades of color and brightness.
  • Able to remain steady while moving an arm or while holding arm and hand in position.
  • See details at close range.
  • Make precise movements of the fingers to grasp, manipulate or assemble small objects.
  • Able to quickly move hand, hand with arm or two hands to grasp, manipulate or assemble objects.

Tasks
  • Mix paints to match color specifications or original colors, using spatulas or power mixing equipment to stir or thin paints.
  • Select and apply paint according to engineering planning documents.
  • Dispose of trash, scrap and hazardous waste in an appropriate manner.
  • Remove grease, dirt, paint, or rust from surfaces using abrasives, solvents, and brushes or washing tanks to prepare to apply paint.
  • Spray or brush prepared surfaces with specified amounts of alodine, primers or finish coatings per engineering planning.
  • Mix ingredients to create specific finishes.
  • Trim excess material.
  • Use any equipment (e.g., computers or hand, power and air tools) needed to complete paint assignments.
  • Perform any pickup, rework and incorporation of changes to the product as required.
  • Work from prints, sketches, specifications and written/verbal instruction.
  • Maintain required certifications, qualifications, licenses or permits.
  • Utilize precision measuring equipment (e.g. isoscopes and scales) to perform self-inspection of in-process and finished work.
  • Perform routine minor maintenance on sprayers, paint guns, etc. as part of the daily work duties.
  • Move product within the manufacturing work area of the shop, including across aisles, using assigned equipment and complete transactions necessary to move product to the next operation.

Level A
Employee is able to perform the critical functions of the paint technician such as:
  • Locate application areas per the engineering planning documents to apply the final application of paints to the completed assembly or section per the work instructions and planning.
  • Complete inspection to ensure parts meet engineering standards.
  • Apply top coat/final application per the engineering planning requirements.
  • Apply DYNOL per engineering planning requirements.

Qualifications
Basic Qualifications (Required Skills/Experience):
  • Ability to obtain a U.S. Secret Security Clearance and Special Program Access (for which the U.S. Government requires U.S. Citizenship)
  • Able to read engineering blueprints, schematics and drawings.
  • Can match or detect differences amongcolors, including shades of color and brightness.
  • Able to remain steady while moving an arm or while holdingarm and hand in position.
  • See details at close range.
  • Make precise movements of the fingers to grasp, manipulate or assemble small objects.
  • Able to quickly move hand, hand with armor two hands to grasp, manipulate or assemble objects.
  • Minimum of 2 year(s) of experience pertaining to the skills identified.
  • All applicants must be willing and able to work any shift, including alternative work weeks.

Preferred Qualifications (Desired Skills/Experience):
  • Understanding of conventional high volume/low pressure (HVLP) paint spray equipment in pressure, gravity and siphon-fed variants,as well as conventional and airless identification pots, pumps and guns.
  • Aircraft or auto body painting experience.
  • Painting prep to include sanding and masking.
  • Three (3) years minimum related experience or equivalent technical certificate.
  • HS diploma, Associate's degree in a technical field preferred.

Union:
This is a union-represented position.
Drug Free Workplace:
We are a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
We strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
We also provide eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Pay: $23.66/hour, with potential to earn up to $39.32/hour in accordance with the terms of the relevant collective bargaining agreement.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status

What Spirit AeroSystems employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply