2

Remote Civil Engineering Jobs in Florida (NOW HIRING)

Provide technical leadership to site civil engineers, inspectors, assign tasks, review work and ... Success in working with remote teams * Experience on full EPC, Design/Build projects from start to ...

Project Engineer- Land Development

Orlando, FL · On-site +1

$77K - $103K/yr

Design of civil land development projects * Site planning and stormwater calculations * As needed, inspect construction site to monitor progress and ensure conformance to engineering specifications ...

Project Engineer - Water Resources

Sarasota, FL · On-site +1

$76K - $104K/yr

Depending on your expertise, you might design infrastructure in remote locations, develop renewable ... Bachelor's or master's degree in civil engineering, environmental engineering, or a related ...

Project Engineer - Water Resources

Sarasota, FL · On-site +1

$76K - $104K/yr

Depending on your expertise, you might design infrastructure in remote locations, develop renewable ... Bachelor's or master's degree in civil engineering, environmental engineering, or a related ...

Depending on your expertise, you might design infrastructure in remote locations, develop renewable ... Professional Engineering (PE) license in Florida, or the ability to obtain or transfer license ...

Depending on your expertise, you might design infrastructure in remote locations, develop renewable ... Professional Engineering (PE) license in Florida, or the ability to obtain or transfer license ...

Depending on your expertise, you might design infrastructure in remote locations, develop renewable ... Professional Engineering (PE) license in Florida, or the ability to obtain or transfer license ...

Depending on your expertise, you might design infrastructure in remote locations, develop renewable ... Professional Engineering (PE) license in Florida, or the ability to obtain or transfer license ...

Showing results 41-60

Remote Civil Engineering information

Can a remote civil engineer work remotely?

Yes, many civil engineering tasks such as design, analysis, and project management can be performed remotely using software tools like AutoCAD and project management platforms. However, some roles requiring site inspections, fieldwork, or on-site supervision typically require physical presence. Remote work opportunities depend on the employer, project requirements, and the engineer's certifications and skills.

What is remote civil engineering?

Remote civil engineering is the practice of performing civil engineering tasks—such as design, analysis, project management, and consultation—using digital tools and communication technologies from a location outside of a traditional office or job site. This can include working from home or another remote location, collaborating with teams via video calls, cloud-based design software, and project management platforms. Remote civil engineers often handle tasks like drafting plans, preparing reports, and overseeing project progress virtually, while site-specific work may still require occasional field visits. This approach offers greater flexibility but also requires strong communication and tech skills.

What is the difference between Remote Civil Engineering vs Remote Structural Engineering?

AspectRemote Civil EngineeringRemote Structural Engineering
Required CredentialsBachelor's in Civil Engineering, PE license often preferredBachelor's in Structural Engineering or Civil Engineering, PE or SE license
Work EnvironmentDesign, planning, project management, site supervision (remote or on-site)Design, analysis, and review of structural systems (primarily remote)
Industry UsageConstruction, infrastructure, transportation projectsBuilding design, bridges, high-rises, and structural assessments
Search & Comparison IntentOften compared for project scope and certification requirementsCompared for specialized structural design tasks

Remote Civil Engineering involves broader civil projects like infrastructure and transportation, often requiring project management skills. Remote Structural Engineering focuses specifically on structural design and analysis, typically needing specialized structural licenses. Both roles can be performed remotely but differ in project scope and technical focus.

What key skills and qualifications are needed to excel as a remote civil engineer?

To thrive as a Remote Civil Engineer, you need a solid background in civil engineering principles, project management, and design, typically supported by a relevant engineering degree and licensure (such as a PE). Proficiency in technical tools like AutoCAD, Civil 3D, and project collaboration platforms is essential for remote work. Strong communication, self-motivation, and problem-solving abilities help you collaborate effectively with distributed teams and manage projects independently. These skills and qualities ensure accurate project delivery, effective teamwork, and the ability to overcome challenges from a remote environment.

What are some common challenges faced by remote civil engineers, and how can they be addressed?

Remote civil engineers often face challenges related to site access, real-time collaboration, and effective communication with on-site teams. To address these, professionals typically rely on advanced project management tools, regular video conferences, and digital site monitoring technologies such as drones or BIM software. Establishing clear communication protocols and maintaining regular updates with project stakeholders is crucial to ensuring project progress and maintaining quality standards while working remotely.
What are the most commonly searched types of Civil Engineering jobs in Florida? The most popular types of Civil Engineering jobs in Florida are:
What cities in Florida are hiring for Remote Civil Engineering jobs? Cities in Florida with the most Remote Civil Engineering job openings:
Infographic showing various Remote Civil Engineering job openings in Florida as of August 2026, with employment types broken down into 60% Full Time, 20% Part Time, and 20% Contract. Highlights an 100% Remote job distribution.

CIVIL ENGINEER (STRUCTURAL)

Naval Facilities Engineering Systems Command

Jacksonville, FL • On-site, Remote

$106K - $138K/yr

Full-time

Re-posted 10 days ago


Naval Facilities Engineering Systems Command rating

7.7

Company rating: 7.7 out of 10

Based on 21 frontline employees who took The Breakroom Quiz

29th of 49 rated military and defense


Job description

Summary
This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.
Learn more about this agency
Duties
Help
  • You will have expertise in independently performing analysis and preparing Structural Waterfront designs for a wide range of facilities of the type as would commonly be found on a DoD Installation.
  • You will have expertise in developing complex Structural Waterfront designs and analysis utilizing engineering software and drawings in Auto Cad and REVIT.
  • You will possess in-depth knowledge of specifications, criteria, policy, industry criteria and standards, and standard practices as related to Waterfront Facility Engineering.
  • You will be able to provide leadership and specialized engineering consultation and support to the NAVFAC SE Waterfront Engineering community.
  • You will have expertise in ensuring that the Structural aspects of the Waterfront projects are constructed in accordance with the contract plans and specifications.
  • You will be proficient in the following construction support activities: Review and Approve shop drawings, Delegated Designs, Value Engineering Cost Proposals (VECPs), and provide technical responses to Requests for Information (RFIs).

Requirements
Help
Conditions of employment
  • Must be a US Citizen.
  • Must be determined suitable for federal employment.
  • Must participate in the direct deposit pay program.
  • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
  • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  • Males born after 12-31-59 must be registered for Selective Service.
  • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  • You will be required to obtain and maintain a current valid United States driver's license.
  • You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
  • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  • This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
  • You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
  • Registration as a Professional Engineer is required.

Qualifications
Your resume must also demonstrate at least one year of specialized experience at or equivalent to the (GS-12) grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Preparing engineering drawings for the structural portion of civil engineering facility design projects; 2) Developing solutions to structural engineering problems; 3) Interpreting policy, regulations and engineering criteria to determine impact on civil/structural engineering design projects; and 4) Monitoring civil/structural projects to ensure adherence to budget, schedule and quality standards.
Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/civil-engineering-series-0810/
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
Additional information
This position is covered by the Department of Defense Priority Placement Program.
Several vacancies may be filled.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf.
Veteran's preference does not apply when selecting individuals under this specific hiring authority. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.
Expand Hide additional information
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

What Naval Facilities Engineering Systems Command employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom