Essential Functions of the Job: * Assist with installation, startup, and maintenance of PLC-based control systems * Troubleshoot basic electrical, mechanical, and control system issues * Support ...
Essential Functions of the Job: * Assist with installation, startup, and maintenance of PLC-based control systems * Troubleshoot basic electrical, mechanical, and control system issues * Support ...
Maintenance Technician
$30 - $38/hr
Use PLC troubleshooting techniques to identify issues in control systems and support repairs to PLC ... Experience with installation and commissioning of new equipment, including mechanical and ...
Quick apply
Maintenance Technician
$30 - $38/hr
Use PLC troubleshooting techniques to identify issues in control systems and support repairs to PLC ... Experience with installation and commissioning of new equipment, including mechanical and ...
Electro-Mechanical Technician
$34 - $38/hr
Work closely with the maintenance team/manager on shift for conduit and wiring changes and installations. * Troubleshoot all PLC systems. * Implement all control system changes and follow through to ...
Electro-Mechanical Technician
$34 - $38/hr
Work closely with the maintenance team/manager on shift for conduit and wiring changes and installations. * Troubleshoot all PLC systems. * Implement all control system changes and follow through to ...
Apply advanced knowledge to utilize Rockwell Automation software to read PLC (Programmable Logic ... GPS systems installation, calibration, and maintenance. * Data analysis with Rockwell Software and ...
Quick apply
Apply advanced knowledge to utilize Rockwell Automation software to read PLC (Programmable Logic ... GPS systems installation, calibration, and maintenance. * Data analysis with Rockwell Software and ...
Use the National Electrical Code (NFPA 79) to enforce code that applies to electrical installations * Diagnose PLC and HMI programs. (Load, modify, create) * Understand switch functions and trip ...
Use the National Electrical Code (NFPA 79) to enforce code that applies to electrical installations * Diagnose PLC and HMI programs. (Load, modify, create) * Understand switch functions and trip ...
$5k Sign-On Bonus: Electro/Mechanical Technician III - 2nd Shift - Bayport, MN
Bayport, MN · On-site
$25.75 - $32.75/hr
Use the National Electrical Code (NFPA 79) to enforce code that applies to electrical installations * Diagnose PLC and HMI programs. (Load, modify, create) * Understand switch functions and trip ...
$5k Sign-On Bonus: Electro/Mechanical Technician III - 2nd Shift - Bayport, MN
Bayport, MN · On-site
$25.75 - $32.75/hr
Use the National Electrical Code (NFPA 79) to enforce code that applies to electrical installations * Diagnose PLC and HMI programs. (Load, modify, create) * Understand switch functions and trip ...
Electrician A - Journeyman - $47.71/hour
Two Harbors, MN · On-site
$47.71/hr
Knowledge of PLC &HMI systems (Schneider, Allen-Bradley, Siemens, Wonderware) * Ability to ... Knowledge of Instrumentation equipment installation and troubleshooting * Knowledge of work order ...
Electrician A - Journeyman - $47.71/hour
Two Harbors, MN · On-site
$47.71/hr
Knowledge of PLC &HMI systems (Schneider, Allen-Bradley, Siemens, Wonderware) * Ability to ... Knowledge of Instrumentation equipment installation and troubleshooting * Knowledge of work order ...
Automations Controls Technician I (3rd Shift)
Alexandria, MN · On-site
$36/hr
Essential Functions of the Job: * Assist with installation, startup, and maintenance of PLC-based control systems * Troubleshoot basic electrical, mechanical, and control system issues * Support ...
Automations Controls Technician I (3rd Shift)
Alexandria, MN · On-site
$36/hr
Essential Functions of the Job: * Assist with installation, startup, and maintenance of PLC-based control systems * Troubleshoot basic electrical, mechanical, and control system issues * Support ...
Controls Electrical Installer
Rochester, MN · On-site
$29.80 - $40.90/hr
What you will do Under general supervision, performs installation and checkout on a variety of ... plc. is an equal employment opportunity and affirmative action employer and all qualified ...
Controls Electrical Installer
Rochester, MN · On-site
$29.80 - $40.90/hr
What you will do Under general supervision, performs installation and checkout on a variety of ... plc. is an equal employment opportunity and affirmative action employer and all qualified ...
Controls Electrical Installer
Rochester, MN · On-site
$29.80 - $40.90/hr
What you will do Under general supervision, performs installation and checkout on a variety of ... plc. is an equal employment opportunity and affirmative action employer and all qualified ...
Controls Electrical Installer
Rochester, MN · On-site
$29.80 - $40.90/hr
What you will do Under general supervision, performs installation and checkout on a variety of ... plc. is an equal employment opportunity and affirmative action employer and all qualified ...
Specialist Technician - Automation (Remote)
Hamel, MN · On-site +1
$45K/yr
Apply advanced knowledge to utilize Rockwell Automation software to read PLC (Programmable Logic ... GPS systems installation, calibration, and maintenance. * Data analysis with Rockwell Software and ...
Specialist Technician - Automation (Remote)
Hamel, MN · On-site +1
$45K/yr
Apply advanced knowledge to utilize Rockwell Automation software to read PLC (Programmable Logic ... GPS systems installation, calibration, and maintenance. * Data analysis with Rockwell Software and ...
Apply advanced knowledge to utilize Rockwell Automation software to read PLC (Programmable Logic ... GPS systems installation, calibration, and maintenance. * Data analysis with Rockwell Software and ...
Apply advanced knowledge to utilize Rockwell Automation software to read PLC (Programmable Logic ... GPS systems installation, calibration, and maintenance. * Data analysis with Rockwell Software and ...
Controls Engineer (Onsite)
Winona, MN · On-site
$85K - $105K/yr
... PLC program changes and adequate training on the installation/changes that have been completed * Develop, troubleshoot, improve, and maintain automation documentation (schematics, functional ...
Controls Engineer (Onsite)
Winona, MN · On-site
$85K - $105K/yr
... PLC program changes and adequate training on the installation/changes that have been completed * Develop, troubleshoot, improve, and maintain automation documentation (schematics, functional ...
Licensed Journeyman Electrician - Evenings
Burnsville, MN · On-site
$59.45/hr
Experience with electrical systems (installation, frequency drive, troubleshooting) * Experience with electronics (e.g., level probes, flow meters, drives/VFDs, etc.). * Experience with PLC (e.g ...
Licensed Journeyman Electrician - Evenings
Burnsville, MN · On-site
$59.45/hr
Experience with electrical systems (installation, frequency drive, troubleshooting) * Experience with electronics (e.g., level probes, flow meters, drives/VFDs, etc.). * Experience with PLC (e.g ...
Experience with electrical systems (installation, frequency drive, troubleshooting) * Experience with electronics (e.g., level probes, flow meters, drives/VFDs, etc.). * Experience with PLC (e.g ...
Experience with electrical systems (installation, frequency drive, troubleshooting) * Experience with electronics (e.g., level probes, flow meters, drives/VFDs, etc.). * Experience with PLC (e.g ...
Maintenance Technician II - 2nd Shift - Bayport, MN
Bayport, MN · On-site
$28 - $36/hr
Understand basic function of PLC, drives and controls * If Applicable (In Electrical License ... Proficient at cutting, bending and installing pipe * Use the National Electrical Code to locate ...
Maintenance Technician II - 2nd Shift - Bayport, MN
Bayport, MN · On-site
$28 - $36/hr
Understand basic function of PLC, drives and controls * If Applicable (In Electrical License ... Proficient at cutting, bending and installing pipe * Use the National Electrical Code to locate ...
Experience with electrical systems (installation, frequency drive, troubleshooting) * Experience with electronics (e.g., level probes, flow meters, drives/VFDs, etc.). * Experience with PLC (e.g ...
Experience with electrical systems (installation, frequency drive, troubleshooting) * Experience with electronics (e.g., level probes, flow meters, drives/VFDs, etc.). * Experience with PLC (e.g ...
Maintenance Technician II - 2nd Shift - Bayport, MN
Bayport, MN · On-site
$28 - $36/hr
Understand basic function of PLC, drives and controls * If Applicable (In Electrical License ... Proficient at cutting, bending and installing pipe * Use the National Electrical Code to locate ...
Maintenance Technician II - 2nd Shift - Bayport, MN
Bayport, MN · On-site
$28 - $36/hr
Understand basic function of PLC, drives and controls * If Applicable (In Electrical License ... Proficient at cutting, bending and installing pipe * Use the National Electrical Code to locate ...
Maintenance Technician II
Minneapolis, MN · On-site
$28.70 - $43.06/hr
Electronically troubleshoot PLC controlled equipment by means of installed PLC * Electronically troubleshoot 24 Volt control circuits * Report food safety and quality issues to appropriate personnel
Quick apply
Maintenance Technician II
Minneapolis, MN · On-site
$28.70 - $43.06/hr
Electronically troubleshoot PLC controlled equipment by means of installed PLC * Electronically troubleshoot 24 Volt control circuits * Report food safety and quality issues to appropriate personnel
Mechatronics Technician
Bagley, MN · On-site
This includes but is not limited to: * o PLC/controller installation, programming, and maintenance * o Integrating various input and output devices with the PLC/controller * o Microcontroller ...
Mechatronics Technician
Bagley, MN · On-site
This includes but is not limited to: * o PLC/controller installation, programming, and maintenance * o Integrating various input and output devices with the PLC/controller * o Microcontroller ...
Plc Installation information
Is a Plc Installation technician a good career?
A PLC installation technician plays a key role in setting up and maintaining programmable logic controllers used in industrial automation. The career offers steady demand, opportunities for advancement, and requires technical skills, certifications, and knowledge of electrical systems. It can be a stable and rewarding field for those interested in engineering and technology.
Is plc installation still in demand?
PLC installation remains in demand as industrial automation and manufacturing continue to adopt programmable logic controllers for process control. Skilled technicians with knowledge of ladder logic, troubleshooting, and certification in automation systems are sought after in various industries, including automotive, food processing, and energy sectors.
What is the difference between Plc Installation vs Plc Maintenance?
| Aspect | Plc Installation | Plc Maintenance |
|---|---|---|
| Certifications | Electrical or automation certifications, technical diplomas | Same as installation, plus troubleshooting skills |
| Work Environment | Installation sites, new equipment setup | Manufacturing plants, ongoing system support |
| Job Focus | Setting up and configuring PLC systems | Monitoring, troubleshooting, and repairing PLCs |
While both roles require similar certifications and work in industrial environments, Plc Installation focuses on setting up new systems, whereas Plc Maintenance involves ongoing support and troubleshooting of existing PLC systems.
What are popular job titles related to Plc Installation jobs in Minnesota?
For Plc Installation jobs in Minnesota, the most frequently searched job titles are:
What job categories do people searching Plc Installation jobs in Minnesota look for?
The top searched job categories for Plc Installation jobs in Minnesota are:
What cities in Minnesota are hiring for Plc Installation jobs?
Cities in Minnesota with the most Plc Installation job openings:
$36/hr
Full-time
Re-posted 7 days ago
SunOpta rating
7.6
Based on 7 frontline employees who took The Breakroom Quiz
139th of 438 rated food and drinks producers
Job description
Job Summary:
The Automation Controls Technician I supports the installation, maintenance, troubleshooting, and repair of automated control systems and industrial equipment. This entry-level role works under close supervision to ensure manufacturing and facility automation systems operate safely, efficiently, and reliably.
Essential Functions of the Job:
- Assist with installation, startup, and maintenance of PLC-based control systems
- Troubleshoot basic electrical, mechanical, and control system issues
- Support preventive and corrective maintenance on automated equipment
- Read and interpret electrical schematics, wiring diagrams, and technical manuals
- Perform basic PLC monitoring, I/O checks, and parameter adjustments
- Assist with sensor, actuator, VFD, HMI, and motor troubleshooting
- Document maintenance activities, repairs, and system changes
- Follow safety procedures, lockout/tagout (LOTO), and company standards
- Work collaboratively with maintenance, engineering, and operations teams
- Escalate complex issues to senior technicians or engineers as needed
- Accountable to the SunOpta Manufacturing Food Safety and Quality Principles.
- All other duties, as assigned.
Supervisory Responsibilities:
- None.
Minimum Qualifications:
- High school diploma or GED required
- Associate degree or technical certificate in Automation, Electronics, Mechatronics, or related field preferred
- 0–2 years of experience in industrial maintenance, automation, or controls (internship or apprenticeship acceptable)
- Basic understanding of PLCs, industrial controls, and electrical systems
- Familiarity with hand tools, electrical test equipment, and basic troubleshooting techniques
- Ability to read basic electrical diagrams and technical documentation
Preferred Qualifications:
- Exposure to PLC platforms (Allen-Bradley, Siemens, etc.)
- Basic knowledge of HMIs, VFDs, and industrial networks
- Strong mechanical and electrical aptitude
- Willingness to learn and take direction
- Good communication and teamwork skills
Additional Considerations:
- Location: This role is at our MN Street SunOpta Plant in Alexandria, MN.
- Shift: 3rd Shift, Sunday - Thursday, 11 pm - 7:30 am.
- Pay Rate: $36.00 / hour.
- Shift Differential: $1.25 / hour shift differential offered for working 3rd Shift.
- Ability to stand, walk, bend, and lift up to 50 lbs.
- Ability to work in industrial environments (noise, heat, moving equipment).
- May require shift work, overtime, or on-call support.
About SunOpta
Sourced by ZipRecruiter
Industry
Food and drink manufacturing
Company size
1,001 - 5,000 Employees
Headquarters location
Eden Prairie, MN, US
Year founded
1973