ZipRecruiter

Log In

1

Permanent Electrical Consulting Jobs in Kansas (NOW HIRING)

AthenPollo LLC

Controls Technician

Topeka, KS · On-site

$62K - $79K/yr

... g and staffing services for over 10 years and committed to becoming one of the nation's premier IT ... Job type: full-time permanent. Location: Topeka, KS. Salary: $62k-$79k/year (DOE) + full benefits ...

AthenPollo LLC

Controls Technician

Topeka, KS · On-site

$62K - $79K/yr

... g and staffing services for over 10 years and committed to becoming one of the nation's premier IT ... Job type: full-time permanent. Location: Topeka, KS. Salary: $62k-$79k/year (DOE) + full benefits ...

Siemens

Field Service Engineer

Kansas City, KS · On-site

$74K - $128K/yr

... consulting as needed * Traveling extensively to job sites across the U.S. to support field ... Field-based commissioning, testing, and troubleshooting of electrical power distribution systems

Actalent

Director Of Construction

Olathe, KS · On-site

$120K - $140K/yr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Oversee execution of commercial electrical projects from preconstruction through closeout. * Ensure ... Job Type & Location This is a Permanent position based out of Lenexa, KS. Pay and Benefits The pay ...

Actalent

Director Of Construction

Olathe, KS · On-site

$120K - $140K/yr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Oversee execution of commercial electrical projects from preconstruction through closeout. * Ensure ... Job Type & Location This is a Permanent position based out of Lenexa, KS. Pay and Benefits The pay ...

Kiewit

KIWE - Indirect Estimator - KS

Lenexa, KS · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

District Overview Kiewit Engineering Group, Inc is a full-service engineering consulting and design ... electrical, controls, structural, architectural, geotechnical, and civil disciplines, is a multi ...

Kiewit Corporation

KIWE - Indirect Estimator - KS

Lenexa, KS · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

District Overview Kiewit Engineering Group, Inc is a full-service engineering consulting and design ... Generate and review RFP packages for pricing on engineered equipment, subcontracts, and permanent ...

All JobsPermanent Electrical Consulting JobsPermanent Electrical Consulting Jobs in Kansas

Permanent Electrical Consulting information

How do you become a permanent electrical consulting?

To become a permanent electrical consultant, individuals typically need a bachelor's degree in electrical engineering or a related field, along with relevant work experience. Obtaining professional licensure or certification, such as a Professional Engineer (PE) license, is often required to practice independently and provide consulting services legally and professionally.

What are the most commonly searched types of Electrical Consulting jobs in Kansas?

The most popular types of Electrical Consulting jobs in Kansas are:

What are popular job titles related to Permanent Electrical Consulting jobs in Kansas?

For Permanent Electrical Consulting jobs in Kansas, the most frequently searched job titles are:

What job categories do people searching Permanent Electrical Consulting jobs in Kansas look for?

The top searched job categories for Permanent Electrical Consulting jobs in Kansas are:

Permanent Electrical Consulting jobs near you

Senior Electrical Design Engineer - Overland Park, KS / ADM site

Archer Daniels Midland

Overland Park, KS

$106K - $138K/yr

Full-time

Re-posted 20 days ago

ADM rating

7.9

Company rating: 7.9 out of 10

Based on 185 frontline employees who took The Breakroom Quiz

76th of 362 rated logistics

Job description

Senior Electrical Design Engineer - Overland Park, KS or ADM site 
This is a permanent, full-time, exempt-level position.
Position Description:
ADM is seeking an Electrical Design Engineer who will be responsible for developing, reviewing, and issuing electrical engineering and design deliverables for ADM facilities across North America.
The Electrical Design Engineer is a pivotal technical lead with design and engineering scope across the high voltage (HV), medium voltage (MV), and low voltage (LV) power systems. The role routinely reviews engineering packages produced by EPCs and external engineering firms, ensures compliance with applicable codes/standards and project requirements, and develops Front End Loading (FEL 1 / FEL 2 / FEL 3) engineering packages to support capital project execution.
The position interfaces closely with CAPEX, Electrical Studies, Operations, Procurement, Construction, and Commissioning to deliver safe, constructible, and maintainable electrical solutions.
Core Responsibilities:
 EPC/ Third Party Engineering Package Review (Owner's Engineer Function):
 
  • Review EPC and consultant deliverables for technical correctness, completeness, constructability, maintainability, and compliance with project requirements
  • Perform interdisciplinary reviews (civil/structural, mechanical, process, I&C) to resolve interface issues (e.g., electrical room layouts, equipment access, hazardous area impacts, heat loads, routing, grounding interfaces)
  • Verify that engineering documents are aligned to the project phase (FEL 1/2/3, IFC), design basis, and scope boundaries
  • Lead comment resolution cycles: consolidate comments, chair review meetings, track closure, and verify incorporation into revised deliverables
  • Ensure vendor data, assumptions, and calculations support the design (e.g., motor starting method, fault duties, grounding method, cable derating assumptions)

     Electrical System Design (HV/MV/LV):
 
  • Develop and/or review electrical design for:
    • HV/MV distribution (substations, switchgear, transformers, feeders, protection and control, metering)
    • LV distribution (MCCs, panelboards, switchboards, UPS, DC systems, emergency power)
    • Motors and drives (across the line, soft starters, VFDs, harmonic mitigation)
    • Standby and prime power generation systems, synchronizing concepts (where applicable)
  • Produce and check power system calculations and engineering analyses, including:
    • Load studies and load lists; demand factors and diversity
    • Cable sizing and voltage drop; ampacity/derating; short circuit withstand
    • Short circuit studies and equipment duty verification (in conjunction with the Electrical Studies Team)
    • Protective device coordination and settings philosophy (in conjunction with Protection Engineer))
    • Arc-flash risk assessment inputs and labeling requirements (in conjunction with the Electrical Studies Team)
    • Grounding system design (touch/step, grid sizing concept as applicable)
    • Lighting calculations and emergency lighting coverage (where in scope)
 
  • Provide electrical equipment selection and technical justification (gear ratings, enclosure selection, environmental considerations, reliability and redundancy philosophy)

     
     FEL 1/ FEL 2/ FEL 3 Engineering Package Development:
 
         FEL 1 (Concept / Options)
 
  • Establish electrical basis of design (high-level) and initial design criteria.
  • Develop conceptual single line diagrams, load summaries, and preliminary equipment concepts (substations, voltage levels, starting philosophy).
  • Evaluate alternatives (e.g., MV vs LV distribution, redundancy levels, starter/VFD strategy, outdoor vs indoor substations) and contribute to Class 4/5 cost and schedule inputs.

FEL 2 (FEED / Definition)
 
  • Develop FEED level deliverables: refined SLDs, preliminary layouts, key equipment lists, design narratives, and preliminary specifications
  • Identify long lead equipment and procurement strategy inputs
  • Progress key calculations to support equipment selection and cost accuracy (typically Class 3 estimate support)

        FEL 3 (Detailed / Execution Ready)
 
  • Develop execution ready engineering packages suitable for detailed design / IFC development:
    • Electrical equipment specifications and datasheets
    • Cable schedules, termination requirements, installation details
    • Raceway and routing concepts; grounding and bonding details
    • Electrical room and substation layouts; duct bank and manhole concepts
    • Construction work packages inputs and scope definitions

     Procurement, Vendor Management, and Technical Governance
 
  • Write and maintain equipment and installation specifications for HV/MV/LV systems (switchgear, MCCs, transformers, UPS, batteries, cable, terminations, trays, conduit, grounding)
  • Prepare technical bid tabulations, evaluate vendor proposals, and recommend awards based on compliance, risk, lifecycle, and operability
  • Review vendor drawings and data books; ensure integration with plant standards and project requirements
  • Identify deviations, manage technical clarifications, and support contract change evaluations

     Safety, Quality and Compliance
 
  • Apply applicable safety and design practices including electrical safety principles (e.g., shock/arc hazards) and safe design requirements
  • Ensure compliance with relevant codes and standards such as:
    • NFPA 70 (NEC), NFPA 70E, IEEE/ANSI, NEMA, etc.
    • Company engineering standards and project specifications
  • Maintain strong document control, QA/QC checking practices, and traceability of assumptions and decisions
  • Contribute to hazard reviews relevant to electrical design (e.g., constructability reviews, operability reviews, arc flash and safe maintenance considerations)

Required Qualifications:
 
  • Bachelor's degree (or higher) in Electrical Engineering
  • 5+ years of electrical engineering/design experience in industrial environments (manufacturing, mining, utilities, O&G, chemical, food/ag, etc.)
  • License Professional Engineer (P.E.) designation, or ability to obtain after hire
  • Experience delivering FEL 1/2/3 packages and transitioning projects into detailed design and execution
  • Experience with substations and power distribution equipment specifications, procurement support and vendor data review
  • Ability to travel: Combination of office and site based work; periodic travel to operating sites, vendor shops (FAT) and construction sites (approximately 45%)

Preferred Qualifications:
 
  • Project Management Professional certification
  • Comprehensive understanding of power system analysis tools (short circuit, coordination, load flow, arc flash) and interpretation of results. Knowledge and experience with SKM is a plus
  • Strong competence in CAD/design review capability for electrical drawings preferably AutoCAD
  • Ability to produce and check calculations with clear assumptions and defensible engineering judgment
  • Strong technical writing skills for design basis documents, specifications, and engineering reports
  • Owner's engineer mindset: risk based review, disciplined checking, and strong standards compliance
  • Interface management: resolves scope gaps between disciplines, vendors, and EPCs
  • Constructability and maintainability focus: designs that can be built, commissioned, and safely maintained
  • Communication: clear technical decisions, concise comment sets, and stakeholder ready summaries

Excited about this role but don't think you meet every requirement listed? Studies have shown that applicants may self select-out of consideration if they do not meet al posted qualifications.  We encourage you to apply anyway. You may be just the right candidate for this role or another one of our openings.
ADM requires the successful completion of a background check.  Relocation assistance is available for this opportunity.
REF:106323BR
AJCIND

What ADM employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply