ZipRecruiter

Log In

2

Part Time Mechanical Applications Engineer Jobs (NOW HIRING)

Nidec Motor

Mechanical Engineering Co-op

Fort Smith, AR

$100K - $133K/yr

Our product line features a full line of high efficiency motors for industrial applications in ... S. degree or equivalent in Electrical Engineering or Mechanical Engineering * Experience with ...

Nidec Corporation

Mechanical Engineering Co-op

Fort Smith, AR · On-site

$100K - $133K/yr

Our product line features a full line of high efficiency motors for industrial applications in ... S. degree or equivalent in Electrical Engineering or Mechanical Engineering * Experience with ...

University of Colorado

Mechanical Engineer

Boulder, CO · On-site

$51K - $62K/yr

... centrifuge applications. This position is ideal for an experienced mechanical engineering ... As an initial appointment, position offers 50% FTE (i.e., part-time), with the possibility of ...

Stantec

Mechanical Engineer

New Cumberland, PA · On-site

$100K - $145K/yr

Proficiency of and ability to use standard computer applications including, but not limited to ... Regular full-time and part-time employees (working at least 20 hours per week) have access to ...

Stantec

Mechanical Engineer

Harrisburg, PA · On-site

$100K - $145K/yr

Proficiency of and ability to use standard computer applications including, but not limited to ... Regular full-time and part-time employees (working at least 20 hours per week) have access to ...

Stantec

Mechanical Engineer

Charlottesville, VA · On-site

$100K - $145K/yr

Proficiency of and ability to use standard computer applications including, but not limited to ... Regular full-time and part-time employees (working at least 20 hours per week) have access to ...

Stantec

Mechanical Engineer

Jacksonville, FL · On-site

$100K - $145K/yr

Proficiency of and ability to use standard computer applications including, but not limited to ... Regular full-time and part-time employees (working at least 20 hours per week) have access to ...

Stantec

Mechanical Engineer

Charlottesville, VA · On-site

$100K - $145K/yr

Proficiency of and ability to use standard computer applications including, but not limited to ... Regular full-time and part-time employees (working at least 20 hours per week) have access to ...

Stantec

Mechanical Engineer

Hampton, VA · On-site

$100K - $145K/yr

Proficiency of and ability to use standard computer applications including, but not limited to ... Regular full-time and part-time employees (working at least 20 hours per week) have access to ...

Stantec

Mechanical Engineer

Annapolis, MD · On-site

$100K - $145K/yr

Proficiency of and ability to use standard computer applications including, but not limited to ... Regular full-time and part-time employees (working at least 20 hours per week) have access to ...

Stantec

Mechanical Engineer

Hampton, VA · On-site

$100K - $145K/yr

Proficiency of and ability to use standard computer applications including, but not limited to ... Regular full-time and part-time employees (working at least 20 hours per week) have access to ...

next page

Showing results 1-20

All JobsMechanical Applications Engineer JobsPart Time Mechanical Applications Engineer Jobs

Part Time Mechanical Applications Engineer information

See salary details

$66.5K

$102.2K

$150K

How much do part time mechanical applications engineer jobs pay per year?

As of Jun 6, 2026, the average yearly pay for part time mechanical applications engineer in the United States is $102,249.00, according to ZipRecruiter salary data. Most workers in this role earn between $84,500.00 and $115,000.00 per year, depending on experience, location, and employer.
What are the most commonly searched types of Mechanical Applications Engineer jobs? The most popular types of Mechanical Applications Engineer jobs are:
Part Time Mechanical Applications Engineer jobs near you
New College Grad - Metrology Applications Engineer

New College Grad - Metrology Applications Engineer

Micron Technology

Manassas, VA • On-site

Part-time

Medical, Dental, Vision, PTO

This job post has expired today. Applications are no longer accepted.

Micron Technology rating

8.7

Company rating: 8.7 out of 10

Based on 39 frontline employees who took The Breakroom Quiz

12th of 139 rated electronics manufacturers

Job description

Our vision is to transform how the world uses information to enrich life for all.
Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.
As a Metrology Engineer at Micron Technology Inc. Manassas, Virginia site, you will develop, analyze, and implement metrology measurement techniques. You will work closely with shift support and process/equipment engineering teams on the identification, evaluation, and detection of process and material influences on process control. You will also be responsible for driving Continuous Improvement Projects (CIPs) through vendor engagement, assisting in technology transfer activities, defining metrics, providing quality measurement data output, and tracking measurement recipe performance. You will be constantly engaged in the Fab operation and performing tasks to improve quality, reduce cost, reduce cycle time, and/or improve yield. Detailed analysis of next generation measurement capabilities as well as coordinating evolutionary programs with the equipment vendors will be required.
Responsibilities
  • Monitor for and improve measurement variation, impacting CpK performance, OOC rates, and process controllers using Metrology data inputs.
  • Employ statistical process control and data analysis methods to observe measurement recipe performance, pinpoint areas needing improvement, and put solutions into action.
  • Participate in and perform Measurement System Analysis (MSA) studies for assigned workstations. Work with area representatives for defining appropriate studies and compiling results using defined templates.
  • Demonstrate an understanding of how current processes are affected by and impact both upstream and downstream process steps, including interactions with process controllers.
  • Engage with Process and Product Integration teams to improve inline detection capabilities and provide recommendations for measurement recipe optimizations, new measurement possibilities, and improved data output and utilization.
  • Continuously improve the Reaction Mechanisms and Procedures based on feedback from end-users, including support of the Periodic Document Review (PDR) process.
  • Support Total Preventative Maintenance (TPM) Documentation requirements, including 1-Pt Lessons and SPC Analysis Reports.
  • Apply recognized methodologies and procedures (Fishbone, 5 Why's, 8D, etc.) for defining problem statements, outlining key distinctions, and identifying appropriate corrective and preventative actions.

Minimum Qualifications
  • Bachelor's degree in Electrical Engineering, Chemical Engineering, Physics, Mathematics related field - or equivalent experience
  • Strong analytical and data-driven decision-making abilities.
  • Ability to work collaboratively in a fast-paced, dynamic environment.

Preferred Qualifications
  • Experience in semiconductor metrology methodologies including spectroscopy, scatterometry, SEM imaging, and/or films analysis.
  • Familiarity with DOE, SPC, and data analysis including use of applications such as JMP for analyzing and plotting data.
  • Knowledge of FMEA, change management, or continuous improvement methodologies.

As a world leader in the semiconductor industry, Micron is dedicated to your personal wellbeing and professional growth. Micron benefits are designed to help you stay well, provide peace of mind and help you prepare for the future. We offer a choice of medical, dental and vision plans in all locations enabling team members to select the plans that best meet their family healthcare needs and budget. Micron also provides benefit programs that help protect your income if you are unable to work due to illness or injury, and paid family leave. Additionally, Micron benefits include a robust paid time-off program and paid holidays. For additional information regarding the Benefit programs available, please see the Benefits Guide posted on micron.com/careers/benefits.
Micron is proud to be an equal opportunity workplace and is an affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, citizenship status, disability, protected veteran status, gender identity or any other factor protected by applicable federal, state, or local laws.
To learn about your right to work click here.
To learn more about Micron, please visit micron.com/careers
For US Sites Only: To request assistance with the application process and/or for reasonable accommodations, please contact Micron's People Organization at hrsupport_na@micron.com or 1-800-336-8918 (select option #3)
Micron Prohibits the use of child labor and complies with all applicable laws, rules, regulations, and other international and industry labor standards.
Micron does not charge candidates any recruitment fees or unlawfully collect any other payment from candidates as consideration for their employment with Micron.
AI alert: Candidates are encouraged to use AI tools to enhance their resume and/or application materials. However, all information provided must be accurate and reflect the candidate's true skills and experiences. Misuse of AI to fabricate or misrepresent qualifications will result in immediate disqualification.
Fraud alert: Micron advises job seekers to be cautious of unsolicited job offers and to verify the authenticity of any communication claiming to be from Micron by checking the official Micron careers website in the About Micron Technology, Inc.

What Micron Technology employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply