1

Otn Jobs (NOW HIRING)

Maintain hubsite/OTN hardware and powering needs and maintenance * Test FTTH, PON, and HFC plant and components using: Signal Level Meter (SLM), Volt-Ohm-Meter (VOM), OTDR, optical power meter ...

The products to develop include optical network equipment, such as optical line systems, ROADMs, optical line interfaces/transponders/muxponders, OTN switches and other transport and switching ...

From Hub sites and OTN cabinets to PON nodes, optical equipment, and outside plant facilities, you'll play a critical role in ensuring our customers receive reliable, high-quality service. If you're ...

The products to develop include optical network equipment, such as optical line systems, ROADMs, optical line interfaces/transponders/muxponders, OTN switches and other transport and switching ...

Familiarity with Ethernet and OTN standards. Working as independent contributor in development of the ASIC validation & characterization plan Development of validation tests on ZeBu emulator prior to ...

Provide technical leadership for DWDM, ROADM, coherent optics, OTN, carrier transport technologies, and network modernization initiatives. * Oversee lifecycle planning and infrastructure evolution ...

From Hub sites and OTN cabinets to PON nodes, optical equipment, and outside plant facilities, you'll play a critical role in ensuring our customers receive reliable, high-quality service. If you're ...

next page

Showing results 1-20

Otn information

See salary details

$33

$57

$93

How much do otn jobs pay per hour?

As of Jun 30, 2026, the average hourly pay for otn in the United States is $57.29, according to ZipRecruiter salary data. Most workers in this role earn between $41.11 and $74.52 per hour, depending on experience, location, and employer.

What is the difference between Otn vs Network Technician?

AspectOtnNetwork Technician
Required CertificationsOptical Network Terminal (ONT) certifications, fiber optics trainingNetworking certifications like CompTIA Network+, Cisco CCNA
Work EnvironmentFiber optic installation, maintenance, and troubleshooting in telecom settingsNetwork setup, troubleshooting, and maintenance in various IT environments
Industry UsageTelecommunications, fiber optic service providersIT, networking, and telecommunications sectors

While both Otn and Network Technicians work in telecommunications and networking fields, Otn specialists focus specifically on fiber optic networks and optical equipment, whereas Network Technicians handle broader network infrastructure including wired and wireless systems. The roles often overlap in fiber optic environments, but their certifications, tools, and daily tasks differ based on their specialization.

What are the key skills and qualifications needed to thrive as an OTN (Optical Transport Network) Engineer, and why are they important?

To thrive as an OTN Engineer, you need a solid background in telecommunications, network protocols, and optical networking, often supported by a degree in electrical engineering or a related field. Familiarity with optical network hardware, management systems, and certifications like Cisco or Juniper are typically required. Strong analytical thinking, attention to detail, and effective communication are valuable soft skills for troubleshooting and collaborating with cross-functional teams. These skills are crucial for building, maintaining, and optimizing high-performance optical networks that support reliable data transmission.

What are some common challenges faced by OTN (Optical Transport Network) Engineers, and how can they be addressed?

OTN Engineers often encounter challenges such as ensuring network reliability, managing high-capacity data transmission, and troubleshooting complex, multi-layered network issues. These challenges can be addressed by staying up-to-date with the latest optical networking technologies, collaborating closely with cross-functional teams (such as network operations and design), and leveraging advanced monitoring tools for proactive problem detection. Regular training and participating in industry forums can also help OTN Engineers stay ahead of evolving standards and solutions.

What are OTN jobs?

OTN jobs refer to roles related to Optical Transport Network (OTN) technology. These positions involve the design, implementation, maintenance, and troubleshooting of optical transport systems that transmit large volumes of data over fiber optic networks. Professionals in OTN jobs often work with telecommunications carriers, network equipment vendors, or enterprise IT departments. Common job titles include OTN Engineer, OTN Technician, and Network Architect. Responsibilities typically focus on ensuring high-speed, reliable, and scalable data transmission across metro and long-haul network infrastructures.
More about Otn jobs
What states have the most Otn jobs? States with the most job openings for Otn jobs include:

System Technician- FTTH

Wideopenwest

Hernando, FL • On-site

Full-time

Posted 18 days ago


Key responsibilities

  • Maintain and repair all aspects of the Fiber to the Home (FTTH) network from the Hubsite and/or OTN cabinet to passive network devices including PON nodes and associated power supplies.

  • Test, troubleshoot, and repair FTTH, PON, and HFC plant components using specialized equipment and compare results with documentation.

  • Perform routine remote OLT setup, balancing, alignment, adjustment of passive components, and connection duties for business subscribers including running and hanging fiber drop and completing connections.


Job description

Summary:
Maintain and repair all aspects of the Fiber to the Home (FTTH) network from the Hubsite and/or OTN cabinet to the passive network devices including any and all PON nodes and their associated power supplies; assists with training and development of other System Technician-FTTH technicians; occasionally and with direction provides day-to-day engineering and operations support to the department.
Duties and Responsibilities:
Essential duties and responsibilities include but are not limited to those listed below:
  • Assessment, maintenance and repairs for hubsite/OTN cabinet, outside FTTH distribution plant, and general plant components
  • Maintain hubsite/OTN hardware and powering needs and maintenance
  • Test FTTH, PON, and HFC plant and components using: Signal Level Meter (SLM), Volt-Ohm-Meter (VOM), OTDR, optical power meter, spectrum analyzer and compare findings with documentation
  • Perform basic DC wiring from equipment to Telect panels
  • Troubleshoot/repair problems with light, RF, AC, and DC portion of forward and reverse plant for transmission levels, signal losses and other interference
  • Perform routine remote OLT setup and balancing, alignment and adjustment of passive components and equipment used to process signals from the OLT to any subscriber port and/or subscriber ONT
  • Perform basic underground and aerial construction duties associated with PON (DWDM) operations such as replacement of defective/damaged optical splitters and subscriber ports
  • Maintains, repairs and replaces optical components of the remote OLT
  • Perform routine business subscriber connection duties such as running/hanging fiber drop and utilize handheld splicer to complete connections
  • Performs and/or assists with emergency fiber restoration.
  • Performs analysis of system performance reports and subsequent preventive and remedial activities
  • Understand/apply FCC and NESC technical standards, including performing FCC required testing
  • Identify and report all incidents of noncompliance (FCC, NESC, OSHA and WOW! standards)
  • Perform networking related troubleshooting including SQC test, trace route and speed test
  • Perform Power Supply installation, maintenance and repair and have a basic understanding of our Continuity PS status monitoring system
  • Perform Field Ops-Engineering walkouts
  • Maintain excellent attendance and appearance
  • Other duties as assigned

Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • Possess a firm understanding or fiber network for troubleshooting and fault resolution assistance
  • Able to present technical information to a non-technical audience
  • Able to work independently
  • Able to use assigned test equipment including but not limited to Signal Level Meter (SLM), Volt Ohm Meter (VOM), OTDR and optical power meter, and other various optical T&T equipment
  • Ability to safely assist and/or perform pole transfers within company and NEC guidelines
  • Ability to raise, lower, re-tension, delash and relash existing plant
  • Able to prioritize and organize assignments and responsibilities
  • Able to accurately maintain records, logs, reports, work orders, etc
  • Able to work flexible hours as required including evenings, weekends and on-call shifts
  • Must have a valid (state) driver's license and maintain driving record that meets the Company's insurance carrier's requirements

Education
  • Position requires a high school diploma or equivalent

Experience/Skills Needed:
  • 3 -5 years of System Maintenance experience (or equivalent in training and experience) and/or related associate's degree is preferred
  • Industry standard fiber certifications a plus

Computer Skills:
  • MS Suite, Internet software, E-mail, basic understanding of Google Suite

Physical Demands/Working Conditions:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • Regularly required to talk and hear
  • Required to use close vision and be able to focus, ability to adjust focus and to see colors
  • Must be able to meet the physical limit requirements of personal protective equipment, aerial lift equipment, ladders and/or gaffs that may be used in this position
  • Ability to work while standing most of the time
  • Ability to walk or work over all types of terrain, in all types of weather
  • Ability to carry tools and equipment including ladders and tool belts
  • Ability to work in tight spaces while bending, twisting and reaching
  • Ability to carry, climb and operate extension ladder (approx. 28' & 75lbs)
  • Ability to differentiate between different sizes and colors of wires
  • Ability to perform work in elevated places (i.e., roofs and utility poles)
  • Ability to use drills, hammers, wrenches, screwdrivers and other hand tools
  • Ability to move, crawl, bend, stoop, kneel, crouch, reach, pull, push, and grasp
  • Ability to lift up to 75 pounds
  • Physically able to operate computer equipment and test equipment
  • Ability to work in environments that may have dust, dirt, noise, reptiles and insects and cleaning solutions
  • Ability to work safely near power lines and electrical equipment
  • Ability to drive Company vehicles in a safe manner

WOW! is an Equal Opportunity Employer/Minorities/Women/Protected Veterans/Disabled/Sexual Orientation/Gender Identity employer
All qualified applicants will receive consideration for employment
without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran