ZipRecruiter

Log In

1

Oscilloscope Jobs in Florida (NOW HIRING)

Jj

Associate Engineer, R&D

Jacksonville, FL · On-site

Perform electrical and component-level troubleshooting using bench tools (multimeter, oscilloscope); wire/build small electrical and pneumatic subassemblies and panels * Support risk management and ...

L3HHCM20

Engineering Technician C - Test

Malabar, FL · On-site

Efficient with use of DMM, Oscilloscope and other measuring tools relevant to troubleshooting * Lean, continuous improvement mindset * Proficient in communicating relevant details of work-related ...

SJE-Rhombus

Senior Edge Engineer - Firmware & MCU

Largo, FL · On-site

$103K - $136K/yr

Reading Modbus RTU timing diagrams on an oscilloscope * Debugging a stuck mutual-TLS handshake on a constrained MCU * Pulling a bricked unit back over JTAG * NXP toolchains (hands-on) or equivalent ...

SJE

Senior Edge Engineer - Firmware & MCU

Largo, FL · On-site

$103K - $136K/yr

Reading Modbus RTU timing diagrams on an oscilloscope * Debugging a stuck mutual-TLS handshake on a constrained MCU * Pulling a bricked unit back over JTAG * NXP toolchains (hands-on) or equivalent ...

SJE-Rhombus

Senior Edge Engineer - Firmware & MCU

Lakeland, FL · On-site

$109K - $144K/yr

Reading Modbus RTU timing diagrams on an oscilloscope * Debugging a stuck mutual-TLS handshake on a constrained MCU * Pulling a bricked unit back over JTAG * NXP toolchains (hands-on) or equivalent ...

GCD

European Automotive Master Technician

Hollywood, FL · On-site

$80K - $110K/yr

Knowledge of PicoScope/Oscilloscope is a plus! * Conduct final quality control inspections and test drives before vehicle delivery * Communicate repair findings clearly to service advisors and, when ...

next page

Showing results 1-20

All JobsOscilloscope JobsOscilloscope Jobs in Florida

Oscilloscope information

See Florida salary details

$9

$18

$29

How much do oscilloscope jobs pay per hour?

As of Aug 27, 2026, the average hourly pay for oscilloscope in Florida is $18.06, according to ZipRecruiter salary data. Most workers in this role earn between $13.65 and $21.39 per hour, depending on experience, location, and employer.

What is an oscilloscope?

An oscilloscope job typically refers to roles involving the use of oscilloscopes to test, measure, and analyze electronic signals. Professionals in these roles, such as electronics technicians or engineers, use oscilloscopes to diagnose circuit issues, validate designs, and troubleshoot electrical systems. They work in industries like telecommunications, automotive, aerospace, and manufacturing. Knowledge of signal waveforms, electronics principles, and test equipment operation is essential.

What is an oscilloscope used for?

An oscilloscope is an electronic test instrument that allows you to visualize and analyze the waveform of electronic signals. It displays voltage changes over time on a screen, making it easier to observe signal characteristics like amplitude, frequency, and noise. Engineers and technicians commonly use oscilloscopes to troubleshoot circuits, design electronics, and test signal integrity in a wide range of applications, from audio equipment to automotive diagnostics. Oscilloscopes provide both qualitative and quantitative information about electronic signals, making them essential tools in labs and workshops.

What are the key skills and qualifications needed to thrive as an oscilloscope technician, and why are they important?

To thrive as an Oscilloscope Technician, you need expertise in electronics, circuit analysis, and troubleshooting, typically supported by a degree or certification in electronics or electrical engineering. Familiarity with oscilloscopes, signal generators, multimeters, and calibration software is essential for accurate diagnostics and maintenance. Attention to detail, analytical thinking, and effective communication are vital soft skills for interpreting data and collaborating with engineers. These skills ensure precise testing, efficient problem-solving, and reliable support for electronic systems in technical environments.

What are the typical challenges faced by technicians when operating an oscilloscope in a laboratory environment?

Technicians working with oscilloscopes often face challenges such as correctly configuring the instrument for different signal types, managing signal noise and interference, and interpreting complex waveforms accurately. Additionally, keeping up with the rapid evolution of oscilloscope technology and software features can be demanding. Collaboration with engineers and other team members is essential, as troubleshooting and validating circuit designs usually require joint problem-solving and clear communication.

What is the difference between Oscilloscope vs Multimeter?

FeatureOscilloscopeMultimeter
Primary UseVisualize electrical signals over timeMeasure voltage, current, resistance
Work EnvironmentElectronics labs, troubleshootingFieldwork, repair shops
Required CertificationsNone specific, technical knowledge neededNone specific, basic electrical knowledge

Oscilloscopes are used to analyze signal waveforms, while multimeters provide quick measurements of electrical parameters. Both tools are essential in electronics troubleshooting but serve different purposes based on the level of detail needed.

What are the most commonly searched types of Oscilloscope jobs in Florida?

The most popular types of Oscilloscope jobs in Florida are:

What are popular job titles related to Oscilloscope jobs in Florida?

For Oscilloscope jobs in Florida, the most frequently searched job titles are:

What job categories do people searching Oscilloscope jobs in Florida look for?

The top searched job categories for Oscilloscope jobs in Florida are:

Oscilloscope jobs near you
Infographic showing various Oscilloscope job openings in Florida as of August 2026, with employment types broken down into 91% Full Time, 4% Part Time, 2% Contract, and 3% Nights. Highlights an 96% Physical, 3% Hybrid, and 1% Remote job distribution, with an average salary of $37,557 per year, or $18.1 per hour.

Embedded Software Engineer V/VI

Zone 5 Technologies

Fort Walton Beach, FL • On-site

$108K - $142K/yr

Full-time

Re-posted 12 hours ago

Job description

We are seeking an experienced Embedded Software Engineer to join our team. As an unmanned aerial systems (UAS) company, we are looking for an individual with experience in writing software for embedded microcontrollers. 

Responsibilities: 

  • Design, code, and implement software for embedded devices and systems on unmanned aircraft and test out those devices in flight test environments. 
  • Write and test software to support the integration of sensors and processors into aircraft (such as autopilots, payloads, radios, or other functional components). 
  • Lead in the development and planning of new projects and programs. 
  • Debug, troubleshoot, and isolate software issues. 
  • Ability to read schematics and use standard debugging equipment: oscilloscope, logic analyzer, multimeter. 
  • Work closely with other engineering disciplines (mechanical, electrical, etc). 
  • Participate in design and peer reviews for solutions. 
  • Maintain and foster high standards of software quality within the team by adhering to good practices and habits of configuration control. 
  • Mentorship and guidance of less-senior teammates to help them grow and flourish. 

Qualifications:  

  • Master's degree in Computer Science, Computer Engineering, Electrical Engineering, Aerospace, or related field. 
  • 12+ years of experience in developing embedded software for real-time systems in avionics, automotive, or other safety-critical systems. 
  • Strong experience with real time operating systems, preferably VxWorks or FreeRTOS. 
  • Demonstrated leadership and mentorship skills in high-performing teams. 
  • Expert in C/C++ in a real-time embedded environment. 
  • Expert level experience with flight, avionics, or other sensor-driven systems. 
  • Comprehensive understanding of GPS, IMU, and other navigational constructs. 
  • Experience using MATLAB and Simulink. 
  • Experience with the CAN bus, SPI, 1553, and serial (RS485, etc.) protocols. 
  • Experience reading and understanding electrical hardware schematics. 
  • Experience writing firmware/embedded code for a physical device. 
  • Fundamental knowledge of low-level firmware. 
  • Experience using an oscilloscope and logic analyzer for debugging boards. 
  • Develop and perform tests and test procedures to verify embedded system functionality. 
  • Collaborate with cross-functional engineering teams to deliver high-quality systems.  

To ensure you've read this description, please start your cover letter or the 'summary' section of your application with the phrase: [Favorite Tool] Specialist found. Applications without this phrase will not be reviewed.

Apply