ZipRecruiter

Log In

1

Mold Set Up Jobs (NOW HIRING)

Uponor North America

Mold Set up

Shawnee, OK · On-site

At GF, we see our company as a forward-thinking leader in our field. Since 1802, we have been embracing innovations and sustainable solutions of the highest quality that add value to people's lives ...

Amcor

SBM Mold Set Up Technician B

Cranbury, NJ · On-site

$25 - $35/hr

Houry Rate DOE $25-$35 3.1 The SBM / EBM Mold Set-Up B is required to perform basic mold assembly and maintenance to ensure that tooling is production ready at the time of the scheduled set up. 3.2 ...

Westlake Corporation

Mold Set-Up Tech

Lenexa, KS · On-site

$18.75 - $24.50/hr

Sets up injection molds and related equipment for sample and production runs * Starts up and cycles in mold in accordance with documented cycles and startup procedures * Troubleshoots and corrects ...

Uponor North America

Mold Set up

Shawnee, OK · On-site

At GF, we see our company as a forward-thinking leader in our field. Since 1802, we have been embracing innovations and sustainable solutions of the highest quality that add value to people's lives ...

Adecco

Mold Set up 3rd Shift

Vega Baja, PR · On-site

$15.28 - $16.78/hr

Mold Set up Base Pay $ 15.28 hourly Monday through Friday 40 hrs. 3rd Shift 10:00 pm - 6:30 am + $0.75 Shift Differential Flexible to train on the 1st or 2nd shift Education, Special Skills, and ...

Tigre USA Inc

Set-Up Technician

Janesville, WI · On-site

$18 - $22.25/hr

Mold set-up/Change molds as needed for production * Operate forklift * Operate overhead crane to move molds to selected machines * Clean and perform basic maintenance and lubrication of molds * Set ...

Simos

Injection Molding Set-up Tech

Lafayette, IN · On-site

$17/hr

Description Staff Management | SMX is hiring immediately for Mold Setters! This is a direct hire ... Set all molds and auxiliary equipment per the mold set-up instructions and mold set-up procedure.

Mack Molding

LEAD SET-UP TECHNICIAN (Molding)

Statesville, NC · On-site

$18.75 - $24.50/hr

Review mold damage reports and ensure adequate detail and root cause analysis is performed. * Work to acquire knowledge of new molds and set-up requirements to ensure accurate instruction of set-up ...

Marmon Holdings, Inc.

Mold Set Up (2nd Shift)

Easley, SC · On-site

$18.25 - $22.75/hr

Sets up machines as specified by work order or blueprints. Assists in the maintenance of tooling to ensure readiness prior to set-up. Ensures safety devices are installed and tested. Typically has 3 ...

GHSP

Mold Setup

Mansfield, OH · On-site

A Mold Set-Up Technican is responsible for supporting mold maintenance and production. Removes and sets molds according to the mold change schedule. Maintains molds for cleanliness and repairs as ...

previous pagenext page

Showing results 21-40

All JobsManufacturing JobsMetal Fabrication JobsMold Set Up Jobs

Mold Set Up information

See salary details

$13

$27

$41

How much do mold set up jobs pay per hour?

As of Aug 21, 2026, the average hourly pay for mold set up in the United States is $27.46, according to ZipRecruiter salary data. Most workers in this role earn between $21.15 and $32.69 per hour, depending on experience, location, and employer.

What does a mold set up technician do?

A Mold Set Up technician is responsible for installing, removing, and maintaining molds on injection molding machines used in manufacturing processes. They ensure that molds are correctly positioned, secured, and connected to other systems such as cooling and hydraulic lines. Their work is crucial for maintaining production efficiency, product quality, and safety in the molding process. Mold Set Up technicians also troubleshoot issues, perform routine maintenance, and help optimize machine performance.

What are some common challenges faced during mold set up, and how can they be addressed?

A frequent challenge in mold set up is ensuring proper alignment and securing of molds to prevent defects in the final product. Technicians may also encounter time pressure when switching molds to accommodate production schedules. These issues can be mitigated by following standardized procedures, performing thorough inspections, and maintaining clear communication with team members in production and quality control. Continuous training and familiarity with various mold types also help technicians respond efficiently to unexpected issues.

What are the key skills and qualifications needed to thrive as a mold set up technician, and why are they important?

To thrive as a Mold Set Up Technician, you need a solid understanding of injection molding processes, mechanical aptitude, and experience with mold installation and removal, typically supported by a high school diploma or technical training. Familiarity with molding machines, hand tools, quality inspection equipment, and safety protocols is essential, and certifications like RJG Master Molder can be advantageous. Attention to detail, problem-solving abilities, and strong teamwork skills help ensure efficient operations and quick resolution of production issues. These skills and qualities are crucial for maintaining product quality, minimizing downtime, and supporting a safe and productive manufacturing environment.

What is the difference between Mold Set Up vs Mold Operator?

AspectMold Set UpMold Operator
CredentialsTypically requires technical training or certification in mold machineryUsually needs basic mechanical skills and on-the-job training
Work EnvironmentPre-production, setup area, often in manufacturing plantsProduction floor, operating molding machines during production
Job FocusPreparing and installing molds for production runsOperating and monitoring molds during manufacturing

In summary, Mold Set Up involves preparing and installing molds before production, requiring technical skills and setup expertise. Mold Operators focus on running and monitoring molds during manufacturing, with less emphasis on setup procedures.

How much do mold set up make?

Mold setup technicians typically earn between $15 and $25 per hour, depending on experience, location, and the complexity of the molds. Some positions may offer additional benefits or overtime pay, especially in manufacturing environments that require precision and safety certifications.

What is a mold set up job?

A mold set up job involves preparing and installing molds in manufacturing equipment, such as injection molding machines, to produce parts. It requires understanding of mold components, proper handling, and often involves adjusting machine settings to ensure quality and efficiency during production. Skills in mechanical work, attention to detail, and safety protocols are essential for this role.
More about Mold Set Up jobs

What states have the most Mold Set Up jobs?

States with the most job openings for Mold Set Up jobs include:

What job categories do people searching Mold Set Up jobs look for?

The top searched job categories for Mold Set Up jobs are:

Mold Set Up jobs near you
Infographic showing various Mold Set Up job openings in the United States as of August 2026, with employment types broken down into 1% As Needed, 78% Full Time, 18% Part Time, and 3% Contract. Highlights an 77% Physical, 1% Hybrid, and 22% Remote job distribution, with an average salary of $57,127 per year, or $27.5 per hour.

Injection Mold Set Up Technician

Assist Staffing

Buffalo Grove, IL

$24 - $38/hr

Full-time, Other

Medical, Dental, Vision, PTO

Re-posted 9 days ago

Job description

We are hiring an experienced Injection Mold Set-Up Technician for a high-precision manufacturing facility in Buffalo Grove, IL. This direct-hire position is ideal for technicians with hands-on injection molding experience who can perform mold changes, set-ups, processing adjustments, and troubleshooting in an automated production environment.

The facility produces small, tight-tolerance plastic components and operates modern molding equipment, robotics, and automated inspection systems. Candidates must have at least 2 years of injection molding or mold setup experience.

Job Overview

The Injection Mold Set-Up Technician is responsible for performing mold installations, machine start-ups, processing checks, and in-process adjustments for night-shift production. This role works with injection molding machines, auxiliary equipment, automated take-out robots, and quality inspection tools while maintaining consistent part quality and machine performance.

Key Responsibilities

• Perform mold set-ups, mold changes, color changes, and machine start-ups

• Operate and adjust injection molding machines in a precision-driven environment

• Work with automation equipment including robotic take-out systems (5-axis and 6-axis)

• Conduct in-process and final quality inspections using calipers, micrometers, gauges, and vision systems

• Troubleshoot molding issues such as shorts, flash, splay, color variation, or dimensional defects

• Perform basic preventive maintenance on molds and auxiliary equipment

• Document production activity in SAP or similar manufacturing systems

• Follow all safety, cleanroom, and quality procedures

Required Qualifications

• Minimum 2 years of injection molding experience

• Experience performing mold changes, set-ups, or processing adjustments

• Strong mechanical aptitude with problem-solving skills

• Ability to lift 50 lbs and stand for 12-hour shifts

• Ability to read and use inspection tools such as micrometers and calipers

• Basic math and computer literacy

• High school diploma or GED

Preferred Qualifications

• Experience in medical molding, precision plastics, or cleanroom environments

• Experience with automated take-out robots or in-mold sensors

• SAP or TMS system experience

• Familiarity with lean manufacturing or 5S

Why This Role Stands Out

• Direct-hire, full-time opportunity

• Modern injection molding facility with cleanroom production areas

• Work with advanced robotics, precision molding technology, and vision inspection systems

• Competitive pay plus 10% night shift premium

• Medical, dental, vision, and PTO

• Stable employer with training and advancement opportunities

• 2-2-3 schedule provides more days off per month

You should be proficient in:

  • Mechanical Troubleshooting Skills
  • Plastics - Nylon 6 Material Experience
  • Plastics - Nylon 66 Material Experience
  • Plastics - PA6 Experience
  • Plastics - PA66 Materials Experience
  • Injection Molding Experience
  • Tool/Die/Mold Setup Experience
  • Blueprint Reading

Machines & technologies you'll use:

  • Injection Molding Machine (Arburg, Engel, Sumitomo, Milacron, Nissei, Toyo, Sodick)
ID:qnkTyx