ZipRecruiter

Log In

1

Metallurgical Inspector Jobs (NOW HIRING)

Howmet

Metallurgical Inspector IV- 2nd shift

Fullerton, CA · On-site

$24.70 - $41.99/hr

... Metallurgical Inspector IV- 2nd Shift at our Fullerton, CA location. Summary: This position is involved directly in the inspection of product after final processing. This position procures samples ...

Laborup

Quality Control Inspector

Bedford, PA

$21.50 - $22.50/hr

You'll perform dimensional, visual, and metallurgical inspections using handheld gauges, optical inspection equipment, and specialized testing equipment while working closely with manufacturing and ...

Laborup

Quality Control Inspector

Bedford, PA · On-site

$21.50 - $22.50/hr

You'll perform dimensional, visual, and metallurgical inspections using handheld gauges, optical inspection equipment, and specialized testing equipment while working closely with manufacturing and ...

The Timken Company

Metallurgy Inspector

Lebanon, NH · On-site

Perform in-process metallurgical inspections according to customer specifications. Audit heat treat productions cycles on a daily basis. * Interface with engineering and inspection areas concerning ...

Laborup

Quality Control Inspector

Bedford, PA · On-site

$21.50 - $22.50/hr

You'll perform dimensional, visual, and metallurgical inspections using handheld gauges, optical inspection equipment, and specialized testing equipment while working closely with manufacturing and ...

Timken

Metallurgy Inspector

Lebanon, NH · On-site

Perform in-process metallurgical inspections according to customer specifications. Audit heat treat productions cycles on a daily basis. * Interface with engineering and inspection areas concerning ...

Timken

Metallurgy Inspector

Lebanon, NH · On-site

Perform in-process metallurgical inspections according to customer specifications. Audit heat treat productions cycles on a daily basis. * Interface with engineering and inspection areas concerning ...

The Timken Company

Metallurgy Inspector

Lebanon, NH · On-site

Perform in-process metallurgical inspections according to customer specifications. Audit heat treat productions cycles on a daily basis. * Interface with engineering and inspection areas concerning ...

Pursuit Aerospace

Metallurgical Engineer

Chicago, IL · On-site

$95K - $140K/yr

Prepare metallurgical documentation, material certifications, and support First Article Inspection Reports (FAIRs) and PPAPs. * Review and disposition nonconforming material, develop rework ...

Pursuit Aerospace

$100 - $125/hr

Prepare metallurgical documentation, material certifications, and support First Article Inspection Reports (FAIRs) and PPAPs. * Review and disposition nonconforming material, develop rework ...

Socket.dev

Metallurgical Engineer

Chicago, IL · On-site

$100 - $125/hr

Prepare metallurgical documentation, material certifications, and support First Article Inspection Reports (FAIRs) and PPAPs. * Review and disposition nonconforming material, develop rework ...

next page

Showing results 1-20

All JobsManufacturing JobsMachining JobsMetal Fabricator JobsMetallurgical Inspector Jobs

Metallurgical Inspector information

See salary details

$24.5K

$54.9K

$99K

How much do metallurgical inspector jobs pay per year?

As of Sep 8, 2026, the average yearly pay for metallurgical inspector in the United States is $54,939.00, according to ZipRecruiter salary data. Most workers in this role earn between $38,500.00 and $63,500.00 per year, depending on experience, location, and employer.

What are popular job titles related to Metallurgical Inspector jobs?

For Metallurgical Inspector jobs, the most frequently searched job titles are:

Infographic showing various Metallurgical Inspector job openings in the United States as of July 2026, with employment types broken down into 74% Full Time, 8% Part Time, 1% Temporary, 16% Contract, and 1% Nights. Highlights an 97% Physical, and 3% Remote job distribution, with an average salary of $54,939 per year, or $26.4 per hour.

Metallurgical Inspector IV- 2nd shift

Fullerton, CA • On-site

Howmet Aerospace
Aviation • 10K+ employees
Learn more about Howmet Aerospaceexternal

$24.70 - $41.99/hr

Full-time, Other

Medical, Dental, Vision, Retirement, PTO

Re-posted 2 days ago

Howmet Aerospace rating

7.8

Company rating: 7.8 out of 10

Based on 166 frontline employees who took The Breakroom Quiz

49th of 72 rated aerospace companies

Job description

Howmet Fastening Systems (HFS) is seeking a Metallurgical Inspector IV- 2nd Shift at our Fullerton, CA location. 

Summary:

This position is involved directly in the inspection of product after final processing.  This position procures samples for dimensional inspection of aerospace parts to ensure conformity to customer drawing requirements. 

This position requires review of the customer drawing, measurement of the part using various types of calibration gages such as a micrometer, caliper, comparator, Keyence IM, drop gage, height gage, Go/No-Go gages, etc. Use of precision inspection tools and equipment, ability to read blueprints and procedures are required in the daily activities to ensure acceptance of product to specifications and requirements. Involvement in other inspections, such as, but not limited to, creating non-conforming material reports, receiving inspection and 3rd party certificate of conformance review.

Knowledge and Skills:

  • Performing appropriate sampling plan per customer requirements
  • Dimensional Inspection and Acceptance
  • Visual Inspection and Acceptance
  • Receiving Inspection and Acceptance
  • Review of 3rd Party Certification of Compliance Documentation
  • Supporting Quality in the recall of gages and tools
  • Review of Manufacturing Router
  • Prepare quality documentation including but not limited to dimensional inspection reports and logbooks for product acceptance 
  • Prepare non-conformance reports for Quality and Engineering evaluation 
  • Use hand tooling such as micrometers, microscopes, calipers, and thread gages
  • Use sampling plans, drawings, work instructions, industry standards and specification to verify conformance of product acceptance. 
  • Other duties and/or responsibilities may be performed as part of cross-training or employee development plan.
  • Basic computer skills for entering and accessing databases and spreadsheets

Basic Qualifications:

  • 3-5 years related quality experience or training in accordance with the defined skills training matrix progression, or equivalent combination of education and experience.
  • Prior experience in a Quality Inspector
  • Ability to read and interpret documents such as safety rules, operating instructions, and procedures manuals 
  • Ability to write routine reports and correspondence 
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio, and percent. 
  • Ability to apply common sense understanding to carry out detailed written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. 
  • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

Work Environment

  • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts.
  • The noise level in the work environment is usually moderate; however, it may be occasionally loud enough where hearing protection is required.
  • Work hours – 5 days, 8 hours a day, with overtime to meet the demands of the job. 

Benefits/Salary:

The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. The salary range for this position is $24.70- $41.99 per hour

What Howmet Aerospace employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Howmet Aerospace logo

About Howmet Aerospace

Sourced by ZipRecruiter

Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company's sales for 2021 approximated $5 billion. The Company's primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With nearly 1,150 granted and pending patents, the Company's differentiated technologies promote more fuel efficiency for aircraft and commercial transportation. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Industry

Aviation

Company size

10,000+ Employees

Headquarters location

Pittsburgh, PA, US

Year founded

1888

View All Howmet Aerospace Jobs

Apply