ZipRecruiter

Log In

1

Manager Plc Scada Jobs (NOW HIRING)

Divcon Controls

Senior PLC Control Technician

... SCADA/HMI integration while coordinating technical execution with Lead PLC Technicians, PLC Engineers, project managers, contractors, and vendors. This position requires regular travel. Per diem ...

NAVA Software Solutions

SCADA Admin

Bronx, NY · On-site

... with all management, supervisory, IT and operating staff in their designated area. Clear ... Knowledge of RTU/PLC protocol (Modbus, DNP3, BSAP) * Ability to write simple scripts and SQL ...

DivIHN Integration Inc

SCADA Programmer

Melbourne, FL · On-site

$63K - $85K/yr

Partner with automation engineers, project managers, and field teams on project planning and execution. * Maintain accurate documentation of PLC logic, SCADA configurations, interface designs, and ...

DivIHN Integration Inc

SCADA Programmer

Melbourne, FL · On-site

$63K - $85K/yr

Partner with automation engineers, project managers, and field teams on project planning and execution. * Maintain accurate documentation of PLC logic, SCADA configurations, interface designs, and ...

Kennedy Industries

SCADA Programmer

Wixom, MI · On-site

$65K - $88K/yr

... management solutions. ESSENTIAL FUNCTIONS SCADA and Control Engineering: • Design, implement and support SCADA, telemetry, PLC and HMI systems • Develop, program, troubleshoot, and maintain PLC ...

Indivior PLC

Automation & Controls Engineer

Raleigh, NC · On-site

$81K - $107K/yr

You will design, implement, maintain, and validate PLC/SCADA/DCS/BMS/EMS/MES interfaces ... Preferred : exposure to MES/EBR integration, historians (OSIsoft PI/AVEVA), recipe management, and ...

Generac

Sr. Controls Engineer - PLC

Trenton, SC · On-site

$105K - $139K/yr

... Management) Team.Responsibilities include automation controls systems design, PLC/SCADA programming, simulation and testing, and start up commissioning.The Senior Control Systems Engineer also ...

Indivior PLC

Automation & Controls Engineer

Raleigh, NC · On-site

$98 - $116/hr

You will design, implement, maintain, and validate PLC/SCADA/DCS/BMS/EMS/MES interfaces ... Preferred: exposure to MES/EBR integration, historians (OSIsoft PI/AVEVA), recipe management, and ...

PinnaclePartners

PLC Engineer

Indianapolis, IN · On-site

$80K - $105K/yr

Develop and support PLC programs, HMI interfaces, and SCADA systems for water and wastewater ... and manage multiple priorities Strong verbal and written communication skills Technical ...

previous page

Showing results 41-60

All JobsAutomotive JobsAuto Repair JobsAuto Transmission Technician JobsManager Plc Scada Jobs

Manager Plc Scada information

See salary details

$31K

$116.6K

$169.5K

How much do manager plc scada jobs pay per year?

As of Sep 5, 2026, the average yearly pay for manager plc scada in the United States is $116,607.00, according to ZipRecruiter salary data. Most workers in this role earn between $91,500.00 and $139,000.00 per year, depending on experience, location, and employer.

What is a manager PLC SCADA?

A Manager PLC SCADA oversees the design, implementation, and maintenance of Programmable Logic Controllers (PLCs) and Supervisory Control and Data Acquisition (SCADA) systems in industrial settings. They manage teams responsible for automation projects, ensure system reliability, and coordinate with other departments to optimize processes. Additionally, they are tasked with troubleshooting technical issues, ensuring compliance with safety standards, and staying updated on the latest automation technologies. Their leadership is crucial in streamlining operations and improving productivity.

What skills and qualifications are needed to be a manager PLC SCADA?

To thrive as a Manager PLC SCADA, you need a solid background in control systems engineering, automation, and a relevant technical degree, often paired with experience managing industrial automation projects. Proficiency with PLC programming languages (like ladder logic), SCADA systems (such as Wonderware or Siemens WinCC), and certifications like Siemens or Allen-Bradley credentials are commonly required. Strong leadership, problem-solving, and communication skills help manage teams and coordinate cross-functional projects effectively. These skills and qualities are essential for ensuring reliable automation processes, system uptime, and efficient team performance in industrial environments.

How does a manager PLC SCADA collaborate with cross-functional teams?

A Manager PLC SCADA frequently works alongside engineers, IT specialists, production managers, and maintenance staff to integrate and optimize automation systems. Collaboration often involves coordinating project timelines, overseeing the implementation of PLC and SCADA solutions, and facilitating troubleshooting efforts to minimize downtime. Regular meetings and clear communication are essential to align technical requirements with operational goals, ensuring that system upgrades and maintenance are carried out efficiently and safely. This collaborative approach helps maintain high system reliability and supports continuous improvement initiatives within the facility.

What is the difference between Manager Plc Scada vs Control Systems Engineer?

AspectManager Plc ScadaControl Systems Engineer
CertificationsPLC, SCADA, project managementPLC, SCADA, control systems design
Work EnvironmentSupervisory, managerial, project oversightDesign, development, testing of control systems
Industry UsageManufacturing, utilities, automation projectsAutomation, process control, system integration

The Manager Plc Scada focuses on overseeing automation projects, managing teams, and ensuring system implementation, while the Control Systems Engineer is more involved in designing and developing control systems. Both roles require knowledge of PLC and SCADA systems but differ in responsibilities and scope.

More about Manager Plc Scada jobs

What cities are hiring for Manager Plc Scada jobs?

Cities with the most Manager Plc Scada job openings:

What are the most commonly searched types of Plc Scada jobs?

The most popular types of Plc Scada jobs are:

What states have the most Manager Plc Scada jobs?

States with the most job openings for Manager Plc Scada jobs include:

What job categories do people searching Manager Plc Scada jobs look for?

The top searched job categories for Manager Plc Scada jobs are:

Manager Plc Scada jobs near you
Infographic showing various Manager Plc Scada job openings in the United States as of August 2026, with employment types broken down into 87% Full Time, 12% Part Time, and 1% Contract. Highlights an 87% Physical, 2% Hybrid, and 11% Remote job distribution, with an average salary of $116,607 per year, or $56.1 per hour.

Senior PLC Control Technician

Divcon Controls

Remote

Full-time

Medical, Dental, Vision, Retirement, PTO

Re-posted 25 days ago

Job description

About the role:
The Senior PLC Control Technician is an expert-level, hands-on professional responsible for leading complex commissioning activities, troubleshooting advanced PLC and industrial networking systems, validating PLC/SCADA integration, and mentoring field technicians. This role serves as a primary technical escalation resource for PLC field challenges while supporting high-quality startup, integration, documentation, safety, and system reliability.
The Senior PLC Control Technician demonstrates mastery of PLC systems, industrial communication protocols, processor redundancy, distributed I/O, and SCADA/HMI integration while coordinating technical execution with Lead PLC Technicians, PLC Engineers, project managers, contractors, and vendors.
This position requires regular travel. Per diem, lodging, and travel accommodation are provided in accordance with company policy.
Key Responsibilities:
  • Lead commissioning activities for large-scale or technically complex PLC automation projects, ensuring systems operate according to design specifications, project requirements, and approved startup plans.
  • Troubleshoot advanced PLC logic, distributed I/O, field instrumentation, processor/controller issues, electrical faults, network communication issues, and SCADA/HMI integration problems in active operational environments.
  • Configure, test, and validate PLC processor redundancy, failover, high-availability deployments, and related communication architecture where required by project scope.
  • Configure, test, and validate industrial communication protocols, including Modbus/IP, Modbus/UDP, EtherNet/IP, BACnet, MQTT, OPC UA, and project-specific gateway integrations.
  • Integrate PLC systems with SCADA/HMI platforms such as Ignition, FactoryTalk, and similar operator interfaces, ensuring seamless communication, correct point mapping, alarm/trend visibility, and operational functionality.
  • Verify controller programs against design sequences or functional requirements, document discrepancies for engineering resolution, and perform authorized troubleshooting or minor configuration support.
  • Perform or support point-to-point validation, sensor/device verification, panel wiring assessment, field instrumentation checks, commissioning scripts, and issue tracking for PLC-supported systems.
  • Mentor and train PLC Control Technicians by providing technical guidance, reviewing work quality, supporting troubleshooting, and quality-checking documentation.
  • Prepare and maintain accurate redlines, as-built documentation, commissioning reports, QC checklists, startup records, failover test records, and turnover deliverables.
  • Coordinate with Lead PLC Technicians, PLC Engineers, project managers, contractors, vendors, and clients to align technical execution with project objectives, safety expectations, and deliverables.
  • Apply working knowledge of AEC processes and construction documents, including plans, specifications, controls submittals, equipment submittals, RFIs, and submittal processes.

Qualifications:
  • Minimum five (5) years of hands-on experience with PLC systems in industrial, construction, or building automation environments.
  • Expert-level proficiency with Allen-Bradley PLC platforms, with strong working knowledge of Siemens and Schneider Electric systems.
  • Mastery or advanced working knowledge of tools such as Studio 5000, FactoryTalk Linx, RSLinx Classic, RSNetWorx, FactoryTalk Activation Manager, Siemens TIA Portal, or comparable PLC software.
  • Demonstrated expertise configuring and validating PLC processor redundancy systems, distributed I/O, industrial networking, protocol gateways, and high-availability architectures.
  • Ability to read ladder logic fluently and interpret contacts, coils, timers, counters, comparison instructions, tag databases, I/O binding, alarm/trend configuration, and sequence modules.
  • Ability to read, interpret, and apply electrical schematics, network diagrams, mechanical plans, equipment submittals, controls submittals, point lists, and construction documentation.
  • Proven leadership, mentorship, communication, troubleshooting, and documentation skills, with ability to guide field technicians and coordinate with project teams.
  • Willingness and ability to travel to project sites as required, approximately 85%.
  • OSHA 10 certification obtained within the past two (2) years is required.
    • If certification is not current or has not been completed, OSHA 10 training will be provided and must be successfully completed within the first week of employment.

Experience
  • Demonstrated experience leading commissioning, startup, and system validation activities for large-scale or technically complex PLC automation projects.
  • Proven experience troubleshooting advanced PLC systems, distributed I/O networks, field instrumentation, SCADA/HMI integration, and communication issues in live operational environments.
  • Hands-on experience supporting system redundancy, failover testing, high-availability deployments, and system acceptance activities.
  • Experience serving as a technical escalation resource for complex field issues and coordinating field activities with engineers, project managers, contractors, vendors, and clients.
  • Experience developing and maintaining as-built drawings, redline documentation, commissioning reports, system turnover packages, issue logs, and QC documentation.
  • Experience mentoring junior technicians and providing on-the-job technical training.

Physical Requirements:
  • Ability to travel by plane or vehicle up to 95% based on work site locations.
  • Ability to stand, walk, and move throughout active construction sites for extended periods
  • Ability to climb ladders, stairs and lifts as required
  • Ability to bend, kneel, crouch, and work in tight or confined spaces
  • Ability to lift, carry, and maneuver equipment and materials up to 50 pounds
  • Manual dexterity to handle tools, wiring, and small components
  • Ability to work at heights and in varying indoor and outdoor conditions
  • Visual keenness to read schematics, labels, and digital displays
  • Ability to hear and respond to alarms, equipment sounds, and verbal instructions
  • Capability to safely operate hand and power tools

Benefits & Total Rewards:
  • Opportunities for Growth

Hands-on training and career advancement in an exploding data-center industry.
  • Medical, Dental, and Vision Insurance

We cover 100% of individual medical premiums and help offset the cost of family coverage.
  • 401K with Employer Match

Eligible after 90 days, with company matching to help you invest in your future.
  • Disability Coverage

Both short- and long-term disability insurance provided at no cost to our employees.
  • Flexible PTO

Take time off when you need it, no accruing time necessary.
  • Field-Based Employee Benefits

For eligible field-based roles that require travel, Divcon covers all business travel expenses and provides a per diem, phone allowance, tools, and PPE at no cost. Eligible employees also receive paid training and additional reimbursable business expenses.
Divcon does not accept unsolicited resumes from agencies. Agencies must have a signed agreement in place prior to submitting any candidate. Unsolicited resumes will be considered the property of Divcon, and no fees will be paid.
About Us:
Headquartered in Dallas, Texas, Divcon delivers fully integrated automation solutions nationwide that optimize performance, energy efficiency, and reliability across HVAC, lighting, power monitoring, and mission-critical systems. Leveraging advanced technologies - including Allen-Bradley PLCs, Ignition SCADA, and Delta DDC systems - we combine deep technical expertise with field-tested execution to deliver precise, scalable, and high-performance solutions.

Apply