ZipRecruiter

Log In

1

Manager Electrical Engineer Embedded Systems Jobs

Nomad GCS

Embedded Systems Engineer II

Columbia Falls, MT · On-site

$60K - $80K/yr

Disciplines: o Mechanical Engineering o Electrical Engineering o IT Engineering o Human Factors ... Sales/Project Management Kickoffs; * SPN reviews, Initial Design Reviews (IDR), and Executive ...

Nomad GCS

Embedded Systems Engineer II

Huntsville, AL · On-site

$60K - $80K/yr

Length of time for training is at the discretion of the Embedded Systems Engineering Manager ... Disciplines: o Mechanical Engineering o Electrical Engineering o IT Engineering o Human Factors ...

Nomad GCS

Embedded Systems Engineer II

Huntsville, AL · On-site

Length of time for training is at the discretion of the Embedded Systems Engineering Manager ... Disciplines: o Mechanical Engineering o Electrical Engineering o IT Engineering o Human Factors ...

ORAU

Software Engineer- Embedded/Firmware

Knoxville, TN · On-site

$91K - $125K/yr

The successful candidate will work closely with electrical, controls, and systems engineers to ... Develop low-level embedded software and firmware, including I&C device drivers * Design and ...

Thea Energy

Embedded Systems Engineer

Kearny, NJ · On-site

$110K - $150K/yr

Required Qualifications: • Bachelor's or Master's degree in Electrical Engineering, Embedded Systems, Power Electronics, or a related field. • 5+ years of experience in control and embedded ...

next page

Showing results 1-20

All JobsElectrical Engineer Embedded Systems JobsManager Electrical Engineer Embedded Systems Jobs

Manager Electrical Engineer Embedded Systems information

See salary details

$62.5K

$137.3K

$192K

How much do manager electrical engineer embedded systems jobs pay per year?

As of Jul 17, 2026, the average yearly pay for manager electrical engineer embedded systems in the United States is $137,274.00, according to ZipRecruiter salary data. Most workers in this role earn between $111,500.00 and $163,500.00 per year, depending on experience, location, and employer.

What is the difference between Manager Electrical Engineer Embedded Systems vs Electrical Engineer Embedded Systems?

AspectManager Electrical Engineer Embedded SystemsElectrical Engineer Embedded Systems
QualificationsBachelor's or Master's in Electrical Engineering, often with leadership trainingBachelor's or Master's in Electrical Engineering or related field
Work EnvironmentTeam leadership, project management, strategic planningDesign, development, testing of embedded systems
ResponsibilitiesOverseeing projects, managing teams, coordinating cross-functional effortsImplementing embedded system solutions, coding, hardware integration

The main difference is that the Manager Electrical Engineer Embedded Systems focuses on leadership, project oversight, and strategic management, while the Electrical Engineer Embedded Systems is primarily involved in technical design, development, and implementation of embedded systems. Both roles require strong technical skills, but the manager role emphasizes team coordination and project management.

More about Manager Electrical Engineer Embedded Systems jobs
What cities are hiring for Manager Electrical Engineer Embedded Systems jobs? Cities with the most Manager Electrical Engineer Embedded Systems job openings:
What are the most commonly searched types of Electrical Engineer Embedded Systems jobs? The most popular types of Electrical Engineer Embedded Systems jobs are:
What states have the most Manager Electrical Engineer Embedded Systems jobs? States with the most job openings for Manager Electrical Engineer Embedded Systems jobs include:
What job categories do people searching Manager Electrical Engineer Embedded Systems jobs look for? The top searched job categories for Manager Electrical Engineer Embedded Systems jobs are:
Manager Electrical Engineer Embedded Systems jobs near you
Infographic showing various Manager Electrical Engineer Embedded Systems job openings in the United States as of July 2026, with employment types broken down into 93% Full Time, 5% Part Time, 1% Contract, and 1% Nights. Highlights an 96% Physical, 1% Hybrid, and 3% Remote job distribution, with an average salary of $137,274 per year, or $66 per hour.

Senior Electrical Engineer - Embedded Systems & Product Development

Bots Unlimited

San Antonio, TX • On-site

$97K - $126K/yr

Full-time

Re-posted 11 days ago

Job description

About Bots Unlimited
Bots Unlimited is a San Antonio based product development and hardware company that designs, produces, and supports high performance technology for drones, robotics, automation, and edge AI systems. We create advanced camera modules, long range wireless solutions, embedded compute platforms, and propulsion electronics, working closely with trusted manufacturing partners to deliver reliable hardware with a globally resilient supply chain. We also provide customers with supply chain support and manufacturing services to help bring complete products to market.
We operate in a fast moving, execution focused environment where team members own their work end to end and are trusted to manage themselves with a high level of accountability. Our team values initiative, clear communication, and a strong senseof responsibility, qualities that let us move quickly and ship production-ready hardware.
If you thrive in a setting where you can take full ownership, solve complex challenges, and build products used in real world scenarios, we may be the right fit for you!
About the Role
We are seeking a Senior Electrical Engineer with deep experience in embedded systems and product development to join our fast paced, high accountability team. This role goes beyond circuit board design - you will drive the architecture, integration, and validation of complex electronics in high performance compute modules, communications systems, and robotics products. This role is critical to the design, development, and productization of compute modules, RF systems, camera systems, and BLDC motor controllers.
You must be a Type-A personality who thrives in fast-paced environments, is self-managed, documents rigorously, and drives designs through manufacturing. This is not just a circuit designer role; you will help lead the entire electrical product lifecycle, including reviews, simulations, integration, and support through production.
Key Responsibilities
  • Lead the electrical design of complex multi-layer HDI PCBs, compute modules, and custom edge AI platforms.
  • Perform detailed power delivery network (PDN) analysis, transient analysis, and high-speed signal integrity simulation.
  • Drive and manage design reviews (initial, intermediate, and final), documenting all design decisions and review outcomes in Confluence.
  • Own the full product development lifecycle from schematic capture to production release.
  • Select, validate, and integrate ICs, power systems, sensors, radios, and other components.
  • Collaborate closely with mechanical engineers to ensure seamless integration into enclosures, thermals, shielding, and interconnects.
  • Develop validation plans, bring-up guides, and work with firmware/software teams during prototype and EVT/DVT phases.
  • Work within KiCad as the primary ECAD tool; Altium experience is helpful but not required.
  • Maintain clean revision control, documentation, and BOMs across development and production.
  • Author thorough documentation in Confluence: schematics, reviews, test plans, bring up notes, etc.
  • Interface directly with suppliers and fabrication/assembly partners on production readiness.
  • Drive validation and bring up of new hardware platforms, working closely with firmware and test teams.
  • Proactively manage project scope, priorities, and deliverables with minimal oversight.
  • Serve as the primary electrical point of contact for external manufacturers and suppliers, supporting hardware bring-up, first article builds, and sustaining engineering tasks.
  • Develop per-unit electrical test plans and oversee the design and validation of custom test fixtures for production environments, ensuring repeatable and scalable test coverage.
  • Support customers through hands-on electrical integration of our modules into their systems, including design reviews, bring-up assistance, and technical validation to ensure successful adoption of development kits into production designs.
  • Travel: Willingness to travel periodically throughout the year to support key product milestones and collaboration efforts. Examples include visiting manufacturing partners for first article builds, production testing, and process improvements; traveling to design partners for technical alignment or strategy meetings; and attending select trade shows or industry events to support product demonstrations or team visibility.

Requirements
Required Qualifications
  • B.S. or M.S. in Electrical Engineering or equivalent technical discipline.
  • 6+ years experience in electrical product development, including shipping real products.
  • Expert in KiCad (mandatory), with working knowledge of Altium or similar tools.
  • Demonstrated experience with HDI board design, controlled impedance, microvias, blind/buried vias.
  • Experience with PoP (package on package), DDR memory routing, and high-speed interfaces (PCIe, USB 3, etc.).
  • Strong skills in PDN, SI, and EMI analysis.
  • Experience integrating PCBs into mechanical systems (e.g. stackups, grounding/shielding, mounting, thermal).
  • Fluent in Confluence, Git, and structured engineering documentation practices.
  • Proven track record of managing full product lifecycles from concept to production.
  • Strong DFM/DFT understanding and supplier/CM collaboration.
  • Proficiency in power systems design, regulators, battery management, and protection circuits.
  • Proficiency with soldering irons, hot air rework, multimeters, power supplies, and other common lab equipment.
  • Comfortable with fine-pitch rework, jumper wiring, and component replacement on dense PCB layouts.
  • Ability to interpret schematics and translate debug results into actionable hardware changes.
  • Familiarity with firmware bring up tools, test instruments (oscilloscopes, logic analyzers), and embedded Linux platforms.
  • Hands-on experience collaborating with contract manufacturers or EMS partners through the entire product lifecycle, from prototyping to production ramp.
  • Strong understanding of production test strategy, including fixture design, validation, and documentation for factory deployment.
  • Proven experience working directly with customers or OEMs to support hardware or module integration, including reviewing schematics, layout, and test plans as part of the pre-sales and design-in process.
  • Familiarity with product regulatory and compliance factors (FCC/CE/UL desirable).
  • High ownership mentality - must be self managed, organized, and quality obsessed.

Preferred / Bonus Qualifications
  • Experience working in a startup or fast-paced product company environment.
  • Prior experience in RF system design, antenna tuning, or wireless regulatory compliance testing (FCC/ISED/CE).
  • Familiarity with wireless communication modules including Wi-Fi, Bluetooth, or 5G.
  • Experience designing with high-power or high-current motor controllers (BLDC, ESCs).
  • Hands-on experience with EMC/ESD mitigation techniques and compliance testing.
  • Proficiency in Python or Bash for test automation or bring-up scripting.
  • Experience in troubleshooting embedded Linux systems and navigating Linux terminals

Benefits
Why Join Us
  • High-Impact Work: Be a core contributor to the development of real products that ship to customers in the robotics and UAS sectors.
  • Fast-Paced Environment: Work at startup speed in a self-managed, execution-driven culture with a high degree of ownership and trust.
  • Technical Excellence: Collaborate with experts across electrical, mechanical, and software domains building next-generation compute and comms modules.
  • Flexibility: This role supports hybrid, remote, or onsite in San Antonio depending on your preference.
  • Real-World Exposure: Travel opportunities to manufacturers, design partners, and industry events, see your work in action from bench to mass manufactured product.
  • Customer-Centric Engineering: Work directly with customers and OEMs to drive real-world adoption and integration of your designs.

Work Environment
This role is flexible and can be hybrid, onsite in San Antonio, or remote, depending on the candidate's profile. Our team operates at startup speed and you will be expected to contribute meaningfully to hardware that ships to customers on aggressive timelines.

Apply