ZipRecruiter

Log In

1

Internship Industrial Automation Engineer Jobs (NOW HIRING)

iFlow Inc

Industrial Automation Engineer

San Diego, CA · On-site

Industrial Automation Engineer Location:Cupertino or San Diego, CA Duration: Fulltime only Must-haves: 7+ years of PLC programming experience, with strong focus on Beckhoff TwinCAT 3 / Structured ...

Nucor

Industrial Automation Engineer

Lexington, NC · On-site

Nucor Steel Lexington is seeking qualified applicants for the position of Industrial Automation Engineer. Duties include: * Design, implement, and configure new automation systems, upgrade older ...

Nucor

Industrial Automation Engineer

Lexington, NC · On-site

Nucor Steel Lexington is seeking qualified applicants for the position of Industrial Automation Engineer. Duties include: * Design, implement, and configure new automation systems, upgrade older ...

OP Mobility

INDUSTRIAL AUTOMATION ENGINEER

Troy, MI · On-site

Automation Engineer Work Location: • Greer, SC or Troy, MI • This person will transfer ... Customer/Industrial projects activities Validate technical feasibility of Vision PLC & Robotics ...

OPmobility

INDUSTRIAL AUTOMATION ENGINEER

Troy, MI

Title: Automation Engineer Work Location: Greer, SC or Troy, MI This person will transfer ... Elaborate and transfers the technical data to the development, industrial and/or plant teams, with ...

Axcelis

Industrial Automation Engineer I

Beverly, MA · On-site

$66K - $100K/yr

Industrial Automation Engineer I - Warehouse Operations At Axcelis, you'll help drive operational ... relevant experience (internship or coop experience encouraged) * Strong analytical and ...

OPmobility

INDUSTRIAL AUTOMATION ENGINEER

Troy, MI · On-site

Automation Engineer Work Location: • Greer, SC or Troy, MI • This person will transfer ... Elaborate and transfers the technical data to the development, industrial and/or plant teams, with ...

next page

Showing results 1-20

All JobsIndustrial Automation Engineer JobsInternship Industrial Automation Engineer Jobs

Internship Industrial Automation Engineer information

See salary details

$11

$19

$29

How much do internship industrial automation engineer jobs pay per hour?

As of Jul 27, 2026, the average hourly pay for internship industrial automation engineer in the United States is $19.31, according to ZipRecruiter salary data. Most workers in this role earn between $16.11 and $20.91 per hour, depending on experience, location, and employer.

What is the difference between Internship Industrial Automation Engineer vs Industrial Automation Engineer?

AspectInternship Industrial Automation EngineerIndustrial Automation Engineer
QualificationsEnrolled in or recent graduate of engineering or technical degreeBachelor's or higher in electrical, mechanical, or automation engineering
Work EnvironmentInternship programs, entry-level projects, supervised tasksFull-time professional roles, independent project work
CertificationsNot mandatory, may have basic technical certificationsRelevant certifications like PLC, SCADA, or automation systems preferred
ResponsibilitiesAssisting in automation system setup, learning, and supportDesign, develop, and maintain automation systems and controls

The main difference is that an Internship Industrial Automation Engineer is a trainee or entry-level position focused on learning and assisting, while an Industrial Automation Engineer is a full-time professional responsible for designing and managing automation systems.

What cities are hiring for Internship Industrial Automation Engineer jobs? Cities with the most Internship Industrial Automation Engineer job openings:
What are the most commonly searched types of Industrial Automation Engineer jobs? The most popular types of Industrial Automation Engineer jobs are:
What states have the most Internship Industrial Automation Engineer jobs? States with the most job openings for Internship Industrial Automation Engineer jobs include:
Internship Industrial Automation Engineer jobs near you
Industrial Automation Engineer

Industrial Automation Engineer

Consolidated Precision Products

Chittenango, NY

$75K - $95K/yr

Full-time

Medical, Dental, Vision, Retirement

Posted 15 days ago

Consolidated Precision Products rating

7.2

Company rating: 7.2 out of 10

Based on 14 frontline employees who took The Breakroom Quiz

Job description

Superior Metals Manufacturing is currently looking for an Industrial Automation Engineer to join our team!
 
If you’re looking to join a company positioned for strong growth - with real opportunities to advance - Superior Metal Manufacturing may be the place for you. We’re proud to offer a competitive compensation package, outstanding benefits, and the chance to work in a state-of-the-art facility alongside a skilled and collaborative team.

Location: Chittenango, NY
Employment Type: Full-Time
Salary: $75,000 - $95,000, but will be evaluated depending on candidates’ knowledge, skills, and abilities.
Job Summary:
The Industrial Automation Engineer plays a critical role in advancing manufacturing capabilities through the development, implementation, and continuous improvement of automated production systems. This position leads automation initiatives across the full equipment lifecycle, from process analysis and capital planning through installation, commissioning, and ongoing optimization. Leveraging industrial engineering techniques and automation technologies, the incumbent drives improvements in safety, quality, throughput, reliability, and data visibility while ensuring seamless integration between manufacturing equipment and site-wide information systems. Working closely with cross-functional teams and external partners, this role supports operational excellence by delivering innovative, efficient, and sustainable automation solutions.
Essential Job Functions/Duties:
 
  • Apply industrial engineering principles, including process flow analysis, time studies, capacity planning, facility layout, process simulation, and cost analysis, to evaluate, size, justify, and optimize manufacturing processes and capital equipment investments.
  • Build and analyze process simulation models, including discrete-event simulations, to support decisions related to equipment selection, facility layout, throughput, and capacity improvements.
  • Lead automation projects through the full equipment lifecycle, including planning, capital justification, design review, installation, testing, commissioning, start-up, and project closure.
  • Coordinate equipment installation, run-off, Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), and commissioning activities with vendors, facilities, production personnel, and the automation team to successfully bring new equipment online.
  • Support hands-on automation activities, including basic mechanical and electrical setup, PLC and HMI configuration, controls troubleshooting, and equipment start-up in collaboration with automation and controls personnel.
  • Drive continuous improvement initiatives by identifying performance gaps, integrating additional automation capabilities, and implementing solutions that improve equipment reliability, uptime, productivity, and overall system efficiency.
  • Develop and implement automation solutions related to manufacturing process improvements, data collection, and systems integration between ERP, MES, Ignition, PLCs, and other site-wide technologies.
  • Interface manufacturing equipment with plant data systems to support quality monitoring, production reporting, and operational visibility.
  • Develop and maintain facility layouts, process documentation, engineering drawings, work instructions, and other technical documentation using AutoCAD or similar CAD software.
  • Research supplier products, evaluate equipment alternatives, and develop recommendations to support capital investment decisions and ensure the selection of best-fit technologies.
  • Collaborate with Production, Quality, Maintenance, Engineering, and other cross-functional teams to resolve process and equipment issues related to capability, capacity, and manufacturing performance.
  • Prepare operator work instructions and provide training to ensure the effective implementation and sustained use of new equipment, processes, and technologies.
  • Demonstrate regular and reliable attendance; comply with all safety policies, procedures, and regulatory requirements; work flexible hours as needed to support business objectives; and contribute to overall team success.

Qualifications:
  • Education: Bachelor’s degree in Industrial Engineering, Manufacturing Engineering, or a related discipline is preferred
  • Two to three years of direct experience in a manufacturing, automation, or equipment commissioning environment is preferred; recent graduates with relevant internship or co-op experience will also be considered.
  • Experience and skill in equipment installation, testing, commissioning, and troubleshooting in a manufacturing environment.

Other Required Knowledge, Skills & Abilities:
  • Working knowledge of industrial engineering fundamentals: process flow analysis, time studies, capacity planning, facility layout, and cost analysis.
  • Process simulation experience is preferred, including building and analyzing discrete-event simulation models in FlexSim; experience with comparable tools (e.g., Simio, Arena, AnyLogic) is acceptable, and academic or co-op project experience is acceptable for recent graduates.
  • Demonstrated interest in automation, controls, and programming, and willingness to work hands-on in a manufacturing environment, including on the shop floor.
  • Exposure to PLC or HMI programming (e.g., Allen-Bradley ladder logic) and programming or scripting in any language (e.g., Python, structured text, C) is preferred.
  • Familiarity with electrical and electronics fundamentals, industrial sensors, or robotics, and proficiency with CAD software for layout development (e.g., AutoCAD, SolidWorks), are preferred.
  • Lean Manufacturing or Six Sigma training, data systems or SQL exposure, and prior manufacturing, casting, or machining experience are pluses.
  • U.S. Person status (U.S. citizen, permanent resident, refugee, or asylee) is required due to ITAR regulations.

Why Join Us?
Innovative Environment: Work in a state-of-the-art melt shop.
Growth Opportunities: Be part of a company that values continuous improvement and offers career development opportunities.
Competitive Benefits: Enjoy a comprehensive benefits package, including health, dental, and vison insurance, retirement plans, bonuses and more.
About Us: 
Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company.  SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/
Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future.
This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status.
 
#Manufacturing #Engineer #ISO #Automation #Aerospace 
EOE/M/F/DISABLED/VETERANS
 

What Consolidated Precision Products employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply