ZipRecruiter

Log In

1

Implementation Technician Process Jobs (NOW HIRING)

Standex Engraving

Process Technician

Fraser, MI · On-site

Process Technician Location: Fraser, MI Company: Standex Engraving Status: Full-time, non-exempt ... Troubleshoot process, material, and equipment issues; implement corrective actions to minimize ...

Standex Engraving

Process Technician

Fraser, MI · On-site

Process Technician Location: Fraser, MI Company: Standex Engraving Status: Full-time, non-exempt ... Troubleshoot process, material, and equipment issues; implement corrective actions to minimize ...

System One Holdings, LLC

Process Technician

Latrobe, PA · On-site

$60K - $70K/yr

Process Technician Objective This position provides daily leadership of personnel and manufacturing ... Implement company policies and procedures fairly and consistently * Complete job-related reports ...

System One

Process Technician

Latrobe, PA · On-site

Process Technician Objective This position provides daily leadership of personnel and manufacturing ... Implement company policies and procedures fairly and consistently * Complete job-related reports ...

NOVARES

Process Technician

Howell, MI

Novares is looking for its Manufacturing department his/her future Process Technician (M/F ... 4 - Implement new processes - Guide and validate tool design - Develop new equipment related to ...

Colson Group Holdings LLC

Process Technician

Monette, AR · On-site

$24 - $29/hr

Overview We are seeking a dedicated and detail-oriented Process Technician to join our team at our ... Identify and troubleshoot process issues, implementing corrective actions as needed. * Collaborate ...

Colson Group

Process Technician

Monette, AR · On-site

$24 - $29/hr

Overview We are seeking a dedicated and detail-oriented Process Technician to join our team at our ... Identify and troubleshoot process issues, implementing corrective actions as needed. * Collaborate ...

Colson Group

Process Technician

Monette, AR · On-site

$24 - $29/hr

Overview We are seeking a dedicated and detail-oriented Process Technician to join our team at our ... Identify and troubleshoot process issues, implementing corrective actions as needed. * Collaborate ...

Röchling Automotive

Process Technician

Duncan, SC · On-site

Röchling Automotive is seeking an experienced Process Technician to support our injection molding ... Troubleshoot molding, robot, and EOAT issues to identify root causes and implement corrective ...

Waev Inc

Process Technician

Anaheim, CA · On-site

$27 - $32/hr

JOB SUMMARY The Process Technician works closely with the Production, Quality, and Engineering ... Support the implementation and maintenance of kanban and other material replenishment systems ...

Waev Inc

Process Technician

Anaheim, CA · On-site

JOB SUMMARY The Process Technician works closely with the Production, Quality, and Engineering ... Support the implementation and maintenance of kanban and other material replenishment systems ...

Waev Inc

Process Technician

Anaheim, CA · On-site

$27 - $32/hr

The Process Technician will monitor assembly processes, assist with line balancing and layout ... Assist with implementing process improvements that improve productivity, quality, safety, and ...

FORVIA

Process/Bending Technician

Columbus, IN · On-site

The Process Engineering Technician will be responsible for the evaluation and correction of welding, assembly and testing processes, development/implementation of preventative counter measures and ...

Thunderbird LLC.

Process Technician

Greensboro, NC · On-site

$18 - $25/hr

Process Technician Position Overview Process Technician is responsible for optimization of the production processes and implementing sustainable corrective measures for process discrepancies while ...

Thunderbird Metals

Process Technician

Greensboro, NC · On-site

$18 - $25/hr

Process Technician Position Overview Process Technician is responsible for optimization of the production processes and implementing sustainable corrective measures for process discrepancies while ...

previous page

Showing results 41-60

All JobsTechnology JobsProject Management JobsProject Assistant JobsImplementation Technician Process Jobs

Implementation Technician Process information

See salary details

$16

$28

$63

How much do implementation technician process jobs pay per hour?

As of Sep 10, 2026, the average hourly pay for implementation technician process in the United States is $28.11, according to ZipRecruiter salary data. Most workers in this role earn between $19.95 and $31.25 per hour, depending on experience, location, and employer.

What are popular job titles related to Implementation Technician Process jobs?

For Implementation Technician Process jobs, the most frequently searched job titles are:

Process Technician

Fraser, MI • On-site

Standex Engraving
See more jobs at Standex Engravingexternal

Full-time

Re-posted 12 days ago

Job description

Position: Process Technician
Location: Fraser, MI
Company: Standex Engraving
Status: Full-time, non-exempt
Reports to: Production Management Summary
The Process Technician is responsible for developing, optimizing, and sustaining manufacturing processes for automotive interior components within a high-tech soft trim and injection molding facility. This role bridges production, maintenance, and quality by ensuring machines, molds, and processes operate at peak efficiency to produce high-quality parts that meet automotive standards. The Process Technician plays a critical role in process setup, troubleshooting, continuous improvement, operator training, and supporting plant startup and ramp-up activities.Required Job Duties
  • Set up, start, and adjust injection molding and soft trim manufacturing processes to meet production and quality requirements.
  • Establish, monitor, and maintain process parameters to ensure consistent part quality and cycle efficiency.
  • Troubleshoot process, material, and equipment issues; implement corrective actions to minimize scrap and downtime.
  • Perform and support mold changes, machine setups, and tooling adjustments.
  • Own Efficiency tracking and reporting metrics at the floor-level
  • Perform routine maintenance tasks including machine lubrication, filter changes, minor repairs, and general upkeep of equipment and tooling to ensure operational readiness.
  • Conduct basic mechanical repairs and handyman-type tasks (e.g., replacing worn components, adjusting fixtures, tightening fittings) to support uninterrupted production.
  • Analyze production data (scrap rates, cycle times, downtime) to identify and implement process improvements.
  • Investigate and resolve quality defects by performing root cause analysis and implementing corrective and preventive actions, working closely with quality teams to disposition nonconforming parts.
  • Support first-article inspections, in-process quality checks, and process capability studies to maintain dimensional and cosmetic standards.
  • Conduct root cause analysis and implement corrective and preventive actions.
  • Collaborate with maintenance to resolve equipment issues and improve reliability.
  • Ensure processes comply with automotive quality standards (IATF 16949, ISO 9001).
  • Develop and maintain process documentation, including setup sheets, work instructions, and parameter controls.
  • Support new product launches, including process validation and PPAP/APQP activities.
  • Train and mentor production operators on process control, setup procedures, quality inspection methods, and troubleshooting basics; provide hands-on coaching at the machine level to build operator capability and reduce dependency on engineering support.
  • Assess operator skill gaps and provide refresher training when process deviations or recurring errors are identified.
  • Maintain accurate records of process changes, trials, and production performance.
  • Follow all safety procedures and maintain a clean, organized work environment.
Required Qualifications
  • High school diploma or GED required.
  • Minimum of 3 years of experience in injection molding and/or automotive soft trim manufacturing.
  • Demonstrated experience in process setup, troubleshooting, and optimization in a production environment
  • Ability to work required shifts, overtime, and maintain reliable attendance.
  • Ability to lift up to 50 lbs and work in a manufacturing environment.
Required Knowledge, Skills, and Abilities
  • Knowledge of plastic materials, molding processes, and soft trim manufacturing techniques (e.g., lamination, edge folding).
  • Ability to set and adjust process parameters for injection molding equipment.
  • Strong troubleshooting skills across mechanical, hydraulic, pneumatic, and basic electrical systems.
  • Hands-on mechanical aptitude with the ability to perform minor equipment repairs, component replacements, and general facility/equipment upkeep.
  • Understanding of process control methods and data analysis (e.g., scrap, cycle time, efficiency).
  • Familiarity with automotive quality systems (IATF 16949, PPAP, APQP) and quality tools such as 8D, 5-Why, and fishbone/Ishikawa diagrams.
  • Ability to read and interpret engineering drawings, work instructions, and technical documents.
  • Demonstrated ability to train and coach production operators with patience, clarity, and technical depth.
  • Strong attention to detail and commitment to quality and safety standards.
  • Ability to work independently and collaborate with cross-functional teams.
  • Effective verbal and written communication skills.

Physical Requirements:
  • This position requires a moderate to high degree of standing, walking, stooping, crouching, bending or kneeling, close eye work, reaching, pulling or pushing. Good hand dexterity, hearing, and vision are considered essential. Moderate to Steady lifting of up to 50lbs. required. Requires wearing personal protective equipment.

Apply