2

Full Time Seismic Interpreter Jobs (NOW HIRING)

Sr. Structural Engineer

Albuquerque, NM · On-site

$91K - $124K/yr

Engineering - Structural Reports to: VP of Engineering Employment Type: Full-time, Exempt ... Perform geotechnical interpretation, foundation selection, pull-test program design and oversight ...

Perform geologic/seismic hazard analysis, construction observation and testing services, and other ... Experience with reviewing and interpreting stereo-paired aerial photographs; * Ability to ...

Perform geologic/seismic hazard analysis, construction observation and testing services, and other ... Experience with reviewing and interpreting stereo-paired aerial photographs; * Ability to ...

Loads & Dynamics Engineer

El Segundo, CA · On-site

$106K - $146K/yr

Implement explicit dynamics simulations to model nonlinear reactor response under transient seismic ... Experience defining or interpreting environmental specifications and requirements. * Master ...

Engineering - Geotechnical Reports to: VP of Engineering Employment Type: Full-time, Exempt ... Apply IBC, ASCE 7, AASHTO, ACI 318, and applicable AHJ amendments for seismic, wind, and frost ...

Electrician

Brooklyn, NY · On-site

$26.25 - $36/hr

Brooklyn VA Medical Center, Brooklyn, NY Employment Type: Full-Time Position Start Date: August 01 ... Reading and interpreting telecom plans, electrical one-lines, riser diagrams, and VA construction ...

Implement explicit dynamics simulations to model nonlinear reactor response under transient seismic ... Experience defining or interpreting environmental specifications and requirements. * Master ...

Electrician

New York, NY · On-site

$27.25 - $37.50/hr

Brooklyn VA Medical Center, Brooklyn, NY Employment Type: Full-Time Position Start Date: August 01 ... Reading and interpreting telecom plans, electrical one-lines, riser diagrams, and VA construction ...

We offer our full-time employees a competitive salary, bonus opportunities, and a full benefits ... seismic/geohazard mitigation * Provide geotechnical support during construction activities ...

Experience with concrete and steel structures, seismic design, structural analysis, and evaluation ... The successful candidate is responsible for interpreting, organizing, executing and coordinating ...

Engineer

Sacramento, CA · On-site

$37.50 - $49.50/hr

Structures Employment Type: Full Time Location: Sacramento, CA Compensation: $37.50 - $49.50 / hour ... Developing structural analysis models and interpreting results for design decisions. * Supporting ...

Showing results 21-40

Full Time Seismic Interpreter information

See salary details

$5

$19

$24

How much do full time seismic interpreter jobs pay per hour?

As of Aug 10, 2026, the average hourly pay for full time seismic interpreter in the United States is $19.35, according to ZipRecruiter salary data. Most workers in this role earn between $16.92 and $21.73 per hour, depending on experience, location, and employer.

What is the difference between Full Time Seismic Interpreter vs Geophysicist?

AspectFull Time Seismic InterpreterGeophysicist
CredentialsGeology or Geophysics degree, seismic interpretation certificationsGeophysics degree, advanced degrees often preferred
Work EnvironmentOil & gas companies, seismic data analysis teamsResearch institutions, energy companies, consulting firms
Industry UsagePrimarily in oil & gas explorationBroader roles including exploration, research, and development

Full Time Seismic Interpreters focus on analyzing seismic data to identify potential hydrocarbon reservoirs, often working within oil and gas companies. Geophysicists have a broader scope, including research, data modeling, and exploration across various industries. While both roles require similar educational backgrounds and work environments, seismic interpreters specialize in seismic data analysis, whereas geophysicists may engage in more diverse geophysical research and applications.

More about Full Time Seismic Interpreter jobs
What are the most commonly searched types of Seismic Interpreter jobs? The most popular types of Seismic Interpreter jobs are:
What job categories do people searching Full Time Seismic Interpreter jobs look for? The top searched job categories for Full Time Seismic Interpreter jobs are:
Infographic showing various Full Time Seismic Interpreter job openings in the United States as of August 2026, with employment types broken down into 1% As Needed, 60% Full Time, 20% Part Time, 2% Temporary, and 17% Contract. Highlights an 87% Physical, 1% Hybrid, and 12% Remote job distribution, with an average salary of $40,250 per year, or $19.4 per hour.

Sr. Structural Engineer

Gridworks

Albuquerque, NM • On-site

$91K - $124K/yr

Full-time

Medical, Dental, Vision, Retirement, PTO

Re-posted 27 days ago


Job description

GRIDWORKS

EPC | Solar | BESS | Substation | Transmission

Senior Structural Engineer – Solar PV & BESS

Location: Albuquerque, New Mexico (On-site)

Department: Engineering – Structural

Reports to: VP of Engineering

Employment Type: Full-time, Exempt

Discipline Focus: Utility-Scale Solar PV and Battery Energy Storage Systems (BESS)

About Gridworks

Gridworks is a self-perform EPC contractor delivering utility-scale solar PV, battery energy storage (BESS), substation, and transmission projects across North America. We design, engineer, procure, and build energy infrastructure that powers the grid of tomorrow. Our Albuquerque office is a hub for our structural engineering practice, supporting projects from feasibility through construction close-out.

The Opportunity

We are seeking a Senior Structural Engineer with deep expertise in utility-scale solar PV and battery energy storage systems to join our Albuquerque team. In this role, you will lead structural design, serve as Engineer of Record (EOR) on assigned projects, partner closely with our self-perform construction teams, and provide technical oversight when structural EOR responsibility is delegated to external engineering firms.

Key Responsibilities
  • Engineer of Record: Seal and stamp structural drawings and calculations for utility-scale PV and BESS projects, taking professional responsibility for design integrity, code compliance, and constructability.
  • PV Structural Design: Lead structural analysis and design for fixed-tilt and single-axis tracker racking systems, foundations (driven piles, helical piles, drilled shafts, ballasted, micropiles, and ground screws), and module-level support structures.
  • BESS Structural Design: Engineer foundations and supports for battery enclosures, inverter/PCS skids, MV/LV transformer pads, fire walls, and equipment platforms in compliance with NFPA 855 and project-specific fire protection criteria.
  • Foundation Engineering: Perform geotechnical interpretation, foundation selection, pull-test program design and oversight, and corrosion mitigation in coordination with geotechnical consultants.
  • Code Compliance: Apply ASCE 7, AISC 360, ACI 318, IBC, and applicable AHJ amendments for wind, seismic, snow, and ice loading; coordinate jurisdictional permitting and plan review responses.
  • EPC Self-Perform Collaboration: Work hand-in-hand with construction, field engineering, procurement, and project management to deliver designs that are buildable, optimized for our self-perform crews, and aligned with project schedules and budgets.
  • Site Engagement: Travel to project sites (estimated 10–20%) for kickoff walks, foundation pull-test witnessing, QA/QC, RFI resolution, and construction support.
  • Vendor & Tracker OEM Coordination: Review and approve tracker, racking, and BESS OEM structural submittals; perform independent verification of vendor-supplied calculations.
  • External EOR Oversight: On projects where structural EOR responsibility is delegated to a third-party engineering firm, serve as Gridworks technical lead, review external EOR calculations, drawings, design basis documents, and load determinations for solar PV and BESS scopes; identify gaps, code interpretation issues, and constructability concerns; track formal review comments through resolution; and represent Gridworks in design coordination meetings with the external EOR.
  • Standards & Tools: Develop and maintain structural design standards, calculation templates, and QA/QC procedures; contribute to estimating support and proposal development.
What We Offer
  • Annual performance bonus.
  • Competitive relocation benefits
  • Comprehensive medical, dental, and vision benefits effective day one.
  • 401(k) plan with company match.
  • Generous PTO, paid holidays, and parental leave.
  • Professional development support, including PE/SE exam reimbursement, continuing education, and conference attendance.
  • A high-impact role on projects that directly accelerate the energy transition.

Equal Opportunity

Gridworks is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.

Required Qualifications
  • Bachelor's degree in Civil or Structural Engineering from an ABET-accredited program.
  • 10–15 years of progressive structural engineering experience, with a meaningful portion focused on utility-scale solar PV and/or BESS.
  • Active Professional Engineer (PE) license; ability to obtain New Mexico PE within 6 months of hire and additional state licensure as project needs require.
  • Demonstrated experience serving as Engineer of Record on utility-scale renewable energy projects.
  • Experience reviewing and providing technical oversight of external/third-party EOR calculations and drawings.
  • Proficiency with industry-standard structural design software including RISA-3D, RISA Foundation, STAAD.Pro, SAP2000, RAM, and/or Tekla Structural Designer.
  • Working knowledge of AutoCAD and Civil 3D for drawing review and coordination.
  • Strong command of ASCE 7, AISC 360, ACI 318, IBC, and NDS as applicable.
  • Ability to travel to project sites within the United States as required (10–20%).
Preferred Qualifications
  • Structural Engineer (SE) license.
  • Master's degree in Structural Engineering or related discipline.
  • Direct experience sealing and stamping drawings as EOR for both solar PV and BESS projects.
  • Familiarity with NFPA 855, UL 9540/9540A, and emerging BESS code requirements.
  • Experience with PV-specific tools such as PVCase, PVFarm, or PlantPredict.
  • Experience working in an EPC or self-perform construction environment.
  • Working knowledge of geotechnical engineering principles and pile load testing programs.
  • Experience supporting proposals, estimating, and constructability reviews.