ZipRecruiter

Log In

2

Full Time Rf Drive Test Engineer Jobs (NOW HIRING)

Impulse Space

RF Test Engineer

Redondo Beach, CA · On-site

$105K - $135K/yr

Assembly, Integration & Test Employment Type: Full Time Location: Redondo Beach Compensation: $105,000 - $135,000 / year Description As an RF Test Engineer at Impulse Space, you will support the ...

Apex

RF Test Engineer

Los Angeles, CA · On-site

$128K - $177K/yr

... and drive hardware improvements. * Develop automated test scripts, infrastructure, and data ... What We Offer For Full-time Employees: * Shared upside: Receive equity in Apex, letting you benefit ...

Flex Ltd.

RF Test Engineer

Austin, TX · On-site

Interface with Engineering, Quality, and other supporting functions to drive defect resolution to ... using RF measurement and test equipment including power meters, signal generators, spectrum ...

Impulse Space

Senior RF Test Engineer

Redondo Beach, CA · On-site

$135K - $180K/yr

Senior RF Test Engineer Department: Assembly, Integration & Test Employment Type: Full Time ... and drive reliability across a wide range of RF hardware. This role is focused on RF test ...

DAS Technology Group

RF Test Engineer

San Jose, CA · On-site

We are hiring an RF Test Engineer on behalf of our client who serves customers in Defense, Aerospace, SatCom and Commercial Markets. The RF Test Engineer should have the following experience:

Impulse Space

RF Test Engineer

Redondo Beach, CA · On-site

As an RF Test Engineer at Impulse Space, you will support the development, integration, and testing ... In addition to base salary, for full-time hires, you may also be eligible for long-term incentives ...

Impulse Space

RF Test Engineer

Redondo Beach, CA

$105K - $135K/yr

Description As an RF Test Engineer at Impulse Space, you will support the development, integration ... In addition to base salary, for full-time hires, you may also be eligible for long-term incentives ...

Flex

RF Test Engineer

Austin, TX

Interface with Engineering, Quality, and other supporting functions to drive defect resolution to ... using RF measurement and test equipment including power meters, signal generators, spectrum ...

3D Glass Solutions

RF Test Engineer

Albuquerque, NM · On-site

Support NPI introduction and work with customers and applications engineers to understand and drive ... Design and build support fixtures, test setups, and harnesses for RF devices on wafers and ...

CesiumAstro

RF Test Engineer II

Austin, TX

We are looking to add an RF Test Engineer II to our team. If you enjoy working in a startup ... Full-time employment offers include company stock options and a generous benefits package including ...

3D Glass Solutions

RF Test Engineer

Albuquerque, NM

Support NPI introduction and work with customers and applications engineers to understand and drive ... Design and build support fixtures, test setups, and harnesses for RF devices on wafers and ...

CesiumAstro

RF Test Engineer II

Austin, TX · On-site

We are looking to add an RF Test Engineer II to our team. If you enjoy working in a startup ... Full-time employment offers include company stock options and a generous benefits package including ...

next page

Showing results 1-20

All JobsRf Drive Test Engineer JobsFull Time Rf Drive Test Engineer Jobs

Full Time Rf Drive Test Engineer information

See salary details

$44K

$126K

$206K

How much do full time rf drive test engineer jobs pay per year?

As of Jul 31, 2026, the average yearly pay for full time rf drive test engineer in the United States is $126,050.00, according to ZipRecruiter salary data. Most workers in this role earn between $101,500.00 and $144,000.00 per year, depending on experience, location, and employer.
What are the most commonly searched types of Rf Drive Test Engineer jobs? The most popular types of Rf Drive Test Engineer jobs are:
Full Time Rf Drive Test Engineer jobs near you

RF Test Engineer

Technology Service Corporation (TSC)

Huntsville, AL • On-site

Full-time

Medical, Retirement, PTO

Re-posted 29 days ago

Job description

RF Manufacturing Test Engineer
TSC is seeking a RF Manufacturing Test Engineer in Huntsville, AL to support the Product Solutions Division. This role is critical to the transition and production of advanced RF systems including seekers, proximity sensors, and other mission-critical electronics.
The ideal candidate is a hands-on engineer who thrives in a production environment and excels at solving complex, non-obvious RF issues impacting performance, yield, and reliability. This position is critical to ensuring production test robustness, yield performance, and mission-ready system delivery.
TSC offers a professional working environment, competitive compensation, and a comprehensive benefits package. Join a team where technical excellence and real-world problem solving drive mission success.
Responsibilities:
  • Serves as the technical authority for production RF performance, test strategy, and yield optimization across defense RF systems including seekers, proximity sensors, height-of-burst sensors, antennas, and RF subsystems.
  • Owns resolution of the most complex production issues, including intermittent failures, environmental sensitivities, calibration drift, and unit-to-unit performance variation.
  • Leads deep-dive root cause investigations across full RF signal chains, including RF front-end, analog, mixed-signal, and embedded interfaces.
  • Diagnoses and resolves issues related to noise, spurious signals, coupling, shielding, grounding, and system-level interactions.
  • Drives transition of RF hardware from development into production, ensuring production-representative test coverage, calibration robustness, and repeatability across builds.
  • Develops and deploys advanced RF production test solutions, including automated test systems, alignment/calibration routines, and system-level validation methods.
  • Optimizes production test flows to balance test coverage, throughput, and false failure reduction, while maintaining mission-critical performance requirements.
  • Drives reduction of test escapes and false failures through improved test coverage, limits, and methodologies.
  • Applies statistical analysis to production data to identify trends in yield loss, drift, and performance variation across lots, builds, and environments.
  • Partners with Design Engineering to close gaps in design for test (DFT), design for manufacturability (DFM), and design for calibration (DFC).
  • Leads implementation of corrective and preventive actions (CAPA) for systemic production issues.
  • Interfaces with Program Management, Quality, Supply Chain, and customers to communicate technical risk, readiness, and production performance.
  • Provides hands-on technical leadership on the manufacturing floor and at the bench, supporting test stations, troubleshooting efforts, and engineering builds.
  • Mentors engineers and technicians in RF debugging, measurement techniques, and production best practices.
  • Expected to independently diagnose issues where RF performance deviates from design intent with no clear failure mode or repeatability.
  • Other duties as assigned.

Required Qualifications:
  • Bachelor's degree in Electrical Engineering or related field with 5+ years of hands-on RF/microwave production experience
  • Demonstrated expertise troubleshooting complex RF systems in production environments, not just lab development
  • Deep understanding of RF system performance including: gain/loss/dynamic range, noise figure and sensitivity, linearity and compression, phase noise and stability, and spurious/interference mechanisms
  • Strong experience debugging RF issues tied to mechanical layout, grounding, shielding, and assembly variation
  • Extensive hands-on experience with RF test equipment: spectrum analyzers, vector network analyzers (VNAs), signal generators, power meters/sensors
  • Experience developing automated RF test systems using Python, LabVIEW, TestStand, or similar frameworks
  • Experience with production calibration, alignment, and tuning of RF systems
  • Strong background in statistical process control (SPC), yield analysis, and failure investigation
  • Proven ability to diagnose issues spanning RF, digital, embedded, and electromechanical domains
  • Experience transitioning products from development to production with emphasis on test readiness, documentation completeness, and process repeatability
  • Strong technical communication skills; able to lead technical reviews, failure investigations, and customer briefings
  • US Citizen and the ability to obtain and maintain a security clearance

TSC Benefits:
TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including ESOP participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more.
Applying to TSC:
Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening.
This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Apply