ZipRecruiter

Log In

2

Full Time Metrology Jobs (NOW HIRING)

ReLogic Research

Metrology Engineer

Huntsville, AL · On-site

Hands-on experience with 3D scanning hardware or metrology equipment in a professional or academic ... Experience supporting reverse engineering or geometry recovery efforts This is a full-time salaried ...

Relogic Research

Metrology Engineer

Huntsville, AL

... for a hands-on Metrology Engineer who is genuinely excited about 3D scanning, dimensional ... is a full-time salaried position with highly competitive compensation based on experience and ...

Type One Energy

Metrology Lead Engineer

Knoxville, TN · On-site

Permanent, full time Reporting to: VP Stellarator Maintenance & Inspection Services Your role in ... As our Metrology Lead Engineer, you will be the driving force behind our measurement and ...

Shield AI

Sr Metrology Engineer (R4960)

Dallas, TX

$101K - $151K/yr

We are seeking a Metrology Engineer with experience in dimensional inspection, GD&T interpretation ... Full-time regular employee offer package: Pay within range listed + Bonus + Benefits + Equity ...

Shield AI

Sr Metrology Engineer (R4960)

Dallas, TX · On-site

$101K - $151K/yr

We are seeking a Metrology Engineer with experience in dimensional inspection, GD&T interpretation ... Full-time regular employee offer package: Pay within range listed + Bonus + Benefits + Equity ...

Shield AI

Sr Metrology Engineer (R4960)

Dallas, TX

$101K - $151K/yr

We are seeking a Metrology Engineer with experience in dimensional inspection, GD&T interpretation ... Full-time regular employee offer package: Pay within range listed + Bonus + Benefits + Equity ...

Corning

Optical Metrology Engineer

Keene, NH · On-site

$112K - $155K/yr

Use a wide array of in-house and commercial metrology and software to assess wavefront ... The range for this position is $112,902.00 - $155,240.00 assuming full time status. Starting pay ...

previous pagenext page

Showing results 21-40

All Jobsfull time JobsScience JobsSpace Science JobsMeteorological Technician JobsFull Time Metrology Jobs

Full Time Metrology information

See salary details

$28K

$60.8K

$91K

How much do full time metrology jobs pay per year?

As of Aug 17, 2026, the average yearly pay for full time metrology in the United States is $60,835.00, according to ZipRecruiter salary data. Most workers in this role earn between $49,000.00 and $69,000.00 per year, depending on experience, location, and employer.

What is the difference between Full Time Metrology vs Part Time Metrology?

AspectFull Time MetrologyPart Time Metrology
Work HoursTypically 40 hours/weekFewer hours, flexible schedule
CertificationsRequired certifications often include CMM certification, calibration trainingSame certifications may be preferred but less mandatory
Work EnvironmentManufacturing, quality control labs, calibration facilitiesSimilar environments, often on a flexible or part-time basis
Industry UsageCommon in manufacturing, aerospace, automotiveUsed in similar industries for project-based or supplemental work

Full Time Metrology roles involve consistent, full-week schedules with comprehensive responsibilities in calibration and measurement. Part Time Metrology offers flexible hours, suitable for project-based or supplemental work, but requires similar skills and certifications. Both roles operate in manufacturing and quality control environments, with overlapping industry applications.

What are the most commonly searched types of Metrology jobs?

The most popular types of Metrology jobs are:

What states have the most Full Time Metrology jobs?

States with the most job openings for Full Time Metrology jobs include:

Full Time Metrology jobs near you

Metrology Engineer - Third Shift

Commonwealth Fusion Systems

Devens, MA • On-site

$80K - $130K/yr

Full-time

Medical, Dental, Vision, Retirement, PTO

Re-posted 16 days ago

Job description

About Commonwealth Fusion Systems:
Commonwealth Fusion Systems is on a mission to deliver the urgent transition to fusion energy.
Combining decades of research, top talent, and new technologies, we're designing and building commercially viable fusion power plants. And we're working with policymakers and suppliers to build the energy industry of the future.
We're in the best position to make it happen. Since 2018, we've raised nearly $3 billion in capital, making us the largest and leading private fusion company in the world.
Now we're looking for more thinkers, doers, builders, and makers to join us. People who'll bring new perspectives, solve tough problems, and thrive as part of a team.
If that's you and this role fits, we want to hear from you.
Join the power movement as a Metrology Engineer
CFS is seeking a motivated Metrology Engineer to develop, validate, and deploy inspection methods for highly engineered hardware supporting the SPARC project. In this role, you'll work hands-on with complex parts and advanced measurement systems, partnering closely with Supply Chain, Manufacturing, Design Engineering, Quality, and R&D to ensure hardware meets demanding performance and reliability requirements.
You'll thrive here if you enjoy solving ambiguous measurement problems, communicating clearly across disciplines, and building repeatable processes that scale. We're looking for someone who takes ownership-from defining inspection strategy and tooling, to documenting methods and presenting results-while continuously improving how metrology supports production and engineering teams.
The Schedule:
Shift: Monday through Friday, 11:00 pm - 7:30 am
Salary Range: $80,000 - 130,000 (includes 15% shift differential)
What you'll do:
  • Develop and refine advanced mechanical inspection techniques to solve complex measurement challenges
  • Qualify and document inspection methods in partnership with Quality Engineering (procedures, work instructions, and evidence of capability)
  • Collaborate daily with Quality and Manufacturing Engineering to support production readiness and rapid issue resolution
  • Support evaluation and selection of new metrology equipment and technologies, including ROI, capability, and implementation planning
  • Maintain metrology equipment and standards; execute 5S and calibration/verification activities as applicable
  • Provide design-for-inspection input during drawing release, GD&T definition, and development of inspection standards
  • Cross-train as a Quality Technician and perform routine inspections as needed to support throughput
  • Summarize, visualize, and present critical dimensional inspection results to technical and non-technical stakeholders
  • Design and procure inspection fixturing and tooling to enable accurate, repeatable measurements

What we're looking for:
  • Bachelors degree in an engineering discipline, or equivalent industry experience in lieu of a degree
  • 3-5 years of experience in a manufacturing, production, or field environment
  • Demonstrated experience developing advanced metrology/inspection techniques
  • Strong communication skills, including presenting technical information to broad audiences
  • Ability to interpret complex mechanical drawings and apply GD&T
  • Working knowledge of standard machining and fabrication processes
  • Experience programming metrology and/or manufacturing equipment
  • CAD design experience
  • CMM programming experience (ZEISS Calypso preferred)
  • Experience using portable metrology equipment (e.g., Creaform, laser tracker, CMM arm)
  • CAD design experience (Siemens NX preferred)
  • Working knowledge of quality systems fundamentals
  • Comfort using Atlassian tools (Jira, Confluence) or similar collaboration platforms

Bonus points for:
  • PolyWorks Inspector experience
  • Hands-on experience with a range of metrology equipment and measurement approaches
  • Experience creating and implementing procedures, work instructions, and training materials
  • Familiarity with statistical quality tools (e.g., gage R&R, DOE)
  • Quality experience in a regulated industry (e.g., aerospace, medical)
  • Working knowledge of ERP and MES systems
  • Experience working as a field metrologist or supporting on-site measurements

Must-have requirements:
  • Ability to occasionally lift up to 50 lbs
  • Perform activities such as typing, standing, or sitting for extended periods of time
  • Work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, lead (Pb), high voltage, high current, pressure systems, and cryogenics
  • Willingness to travel or work required nights/weekends/on-call occasionally

$70,000 - $120,000 a year
Salary range for this full-time position + equity + benefits. The actual salary will depend on level, location, qualifications, and experience. The range displayed on each job posting reflects new hire salaries for the position across all US locations. Benefits include:
• Competitive compensation with equity
• 13 Company-wide Holidays
• Flexible vacation days
• 10 sick days
• Generous parental leave policy
• Health, dental, and vision insurance
• 401(k) with employer matching
• Professional growth opportunities
• Team-building activities
#LI-Onsite
#CFS-EX
At CFS, we excel in fast-paced environments, driven by our values of integrity, execution, impact, and self-critique. As we grow, we're eager to bring on mission-driven folks who offer diverse perspectives and fresh ways to tackle challenges.
We value diversity deeply and are proud to be an equal opportunity employer by choice. We consider all qualified applicants equally, regardless of race, color, national origin, ancestry, citizenship status, protected veteran status, religion, physical or mental disability, marital status, sex, sexual orientation, gender identity or expression, age, or any other basis protected by law.
This role requires compliance with U.S. laws concerning the export of controlled or protected technologies or information (collectively, "Export Control Laws"). Any offer of employment will be contingent on the need for compliance with such Export Control Laws.

Apply