ZipRecruiter

Log In

2

Entrylevel Quality Control Inspector Jobs in Leander, TX

Aalo Atomics

Quality Control Inspector

Austin, TX · On-site

About the role The Quality Control (QC) Inspector is responsible for performing inspection ... Level I: Entry-level with basic training and supervised experience * Level II: Demonstrated ...

Rinker Materials

Quality Control Technician

Austin, TX

$18.50 - $23.75/hr

Inspect finished good loads prior to plant departure * Coach and train the team in quality requirements Qualifications: * High School Diploma or GED. * 2 years manufacturing experience. Prior QC ...

Rinker Materials

Quality Control Technician

Austin, TX

$18.50 - $23.75/hr

Inspect finished good loads prior to plant departure * Coach and train the team in quality requirements Qualifications: * High School Diploma or GED. * 2 years manufacturing experience. Prior QC ...

Rinker Materials

Quality Control Technician

Austin, TX · On-site

$18.50 - $23.75/hr

Inspect finished good loads prior to plant departure * Coach and train the team in quality requirements Qualifications: * High School Diploma or GED. * 2 years manufacturing experience. Prior QC ...

The Goodkind Co

Quality Line Inspector

Round Rock, TX · On-site

Overview Reporting to the Quality Control Supervisor, the Quality Control Line Inspector is responsible for in-process line inspections and documentation of findings as well as the enforcement of ...

The Goodkind Co

Quality Line Inspector

Round Rock, TX · On-site

Overview Reporting to the Quality Control Supervisor, the Quality Control Line Inspector is responsible for in-process line inspections and documentation of findings as well as the enforcement of ...

next page

Showing results 1-20

All JobsEntrylevel Quality Control Inspector JobsEntrylevel Quality Control Inspector Jobs in Leander, TX

Entrylevel Quality Control Inspector information

See Leander, TX salary details

$11

$20

$31

How much do entrylevel quality control inspector jobs pay per hour?

As of Jun 21, 2026, the average hourly pay for entrylevel quality control inspector in Leander, TX is $20.52, according to ZipRecruiter salary data. Most workers in this role earn between $16.54 and $22.98 per hour, depending on experience, location, and employer.

What qualifications do you need to be a quality control inspector?

Entry-level quality control inspectors typically need a high school diploma or equivalent and basic knowledge of manufacturing processes. Strong attention to detail, good communication skills, and the ability to use measurement tools like calipers or gauges are important; some positions may require certification in quality standards such as ISO or Six Sigma.

How to become a QA inspector?

To become a quality control inspector, candidates typically need a high school diploma or equivalent, along with relevant experience or training in quality assurance or manufacturing. Certifications such as ASQ Certified Quality Inspector can enhance job prospects. Strong attention to detail, knowledge of inspection tools, and understanding of industry standards are essential for success in this role.

How to become a QC inspector with no experience?

To become an entry-level quality control inspector with no experience, focus on developing attention to detail and basic knowledge of inspection tools. Completing relevant training or certifications, such as a quality control or inspection course, can improve your chances, and gaining familiarity with industry standards and safety protocols is beneficial. Entry-level positions often require a high school diploma or equivalent and on-the-job training.

What qualifications do I need to be a quality inspector?

To become an entry-level quality control inspector, candidates typically need a high school diploma or equivalent. Relevant skills include attention to detail, basic knowledge of measurement tools and inspection procedures, and sometimes certification in quality standards such as ISO or Six Sigma. Prior experience in manufacturing or a related environment can be beneficial but is not always required.
What are popular job titles related to Entrylevel Quality Control Inspector jobs in Leander, TX? For Entrylevel Quality Control Inspector jobs in Leander, TX, the most frequently searched job titles are:
What cities near Leander, TX are hiring for Entrylevel Quality Control Inspector jobs? Cities near Leander, TX with the most Entrylevel Quality Control Inspector job openings:
Entrylevel Quality Control Inspector jobs near you

Quality Control Inspector

Aalo Atomics

Austin, TX • On-site

Full-time

Medical, Dental, Vision, PTO

Posted 6 days ago

Job description

About Aalo Atomics
Aalo Atomics is pioneering a new era in clean energy with factory-fabricated microreactors designed to deliver affordable, scalable, and reliable nuclear power. Our mission is to make nuclear energy globally accessible, starting with the Aalo-1, a 10 MWe reactor leveraging cutting-edge safety, modularity, and efficiency. Based in Austin, TX, we're rapidly growing as we work to deploy the world's first fleet of advanced reactors. Join us and help revolutionize energy for a sustainable future.
About the role
The Quality Control (QC) Inspector is responsible for performing inspection activities to verify conformance of materials, components, and processes to applicable codes, standards, procurement documents, and internal quality requirements. This role serves as a key function in ensuring dimensional accuracy, material traceability, and compliance with applicable regulatory and quality program requirements, including ASME and NQA-1.
The QC Inspector operates within defined procedures and documented instructions and supports production, engineering, and quality assurance functions to prevent nonconforming conditions and ensure product integrity.
What you'll do
The QC Inspector performs inspection and test activities on safety-related, non-safety related with special treatment, and other designated items in accordance with approved procedures and instructions.
Activities include, but are not limited to:
  • Inspection and verification of mechanical components, fabrication, and assemblies
  • Review of inspection/test documentation and acceptance records
  • Verification of compliance with drawings, specifications, and code requirements
  • Participation in quality system activities including audits, corrective actions, and process improvements

General Inspection Duties
  • Perform inspections and tests in accordance with approved procedures, drawings, and acceptance criteria
  • Document inspection and test results clearly and accurately
  • Identify, document, and report nonconforming conditions
  • Witness and verify work activities when required by governing documents
  • Maintain complete and traceable quality records
  • Support process reporting and continuous improvement initiatives

Consistent with qualification expectations, inspectors must be capable of performing and documenting inspections in accordance with procedures and standards.
Incoming Material Inspection & Traceability
  • Review Certified Material Test Reports (CMTRs/MTRs) for compliance with procurement and code requirements
  • Verify heat/lot traceability to drawings and purchase orders
  • Perform receiving inspections and document acceptance status
  • Segregate and control nonconforming materials
  • Develop and maintain inspection plans and travelers

Dimensional and Visual Inspection
  • Perform in-process and final inspections using precision measurement tools (e.g., micrometers, calipers, height gauges, gauges, CMM systems)
  • Verify conformance to dimensional tolerances and GD&T requirements
  • Generate inspection reports, including First Article Inspection (FAI) documentation
  • Conduct visual inspections for workmanship, fit-up, and weld conformance

Welding and Fabrication Quality Support
  • Verify welding documentation including WPS, PQR, and welder qualifications
  • Confirm traceability of welds and associated materials
  • Support or witness qualification activities as required
  • Verify compliance with applicable welding codes and standards

Audits, Nonconformance, and Corrective Action
  • Participate in internal and supplier audits
  • Support or lead Nonconformance Reports (NCR) and Corrective/Preventive Actions (CAPA)
  • Perform root cause analysis and verification of corrective actions
  • Support Material Review Board (MRB) activities

Metrology and Calibration
  • Verify calibration status of inspection and test equipment prior to use
  • Maintain control of gauges, fixtures, and measurement systems
  • Coordinate calibration activities with external providers
  • Support measurement system analysis (e.g., gage R&R)

Documentation and Records
  • Maintain accurate, legible, and complete inspection/test records
  • Ensure records meet quality program requirements for traceability and retention
  • Support documentation required for certification and qualification records
Qualifications
Education and Experience
Minimum qualifications shall be consistent with applicable inspection personnel requirements:
  • High school diploma or equivalent (minimum baseline requirement)
  • Relevant inspection or testing experience in applicable disciplines

Typical experience levels:
  • Level I: Entry-level with basic training and supervised experience
  • Level II: Demonstrated capability in inspection planning, execution, and evaluation
  • Level III (if applicable): Advanced capability including evaluation of procedures and personnel

These levels align with defined capability expectations for inspection personnel.
Technical Competencies
  • Ability to read and interpret drawings, specifications, and procedures
  • Working knowledge of dimensional metrology and inspection techniques
  • Understanding of material traceability and documentation requirements
  • Familiarity with applicable codes and standards (e.g., ASME, NQA-1)
  • Ability to evaluate inspection results and determine acceptability

Certification and Qualification
  • Personnel shall be trained, qualified, and certified in accordance with applicable quality procedures
  • Certification is based on education, experience, training, and demonstrated capability
  • Certification validity period and recertification requirements shall comply with program procedures

Physical Requirements
  • Ability to perform inspection activities including visual acuity and color differentiation
  • Capability to stand, walk, and perform shop-floor inspections for extended periods
  • Ability to handle and measure components safely

Annual vision examinations and physical capability requirements shall be met for certification.
Authorities and Interfaces
The QC Inspector:
  • Has authority to identify, segregate and document nonconforming conditions
  • Interfaces with Manufacturing, Engineering, and Quality Assurance
  • Supports certification, audit, and compliance activities
  • Operates under the direction of Quality Control and Quality Assurance leadership

Key Performance Expectations
  • Accuracy and completeness of inspection records
  • Effectiveness in identifying and preventing nonconformances
  • Adherence to procedures and quality program requirements

Contribution to continuous improvement and audit readiness
Requirements:
  • Based in the United States
  • Willing to work on-site in Austin, TX

What We Offer:
  • Competitive salary
  • Health, Dental, Vision Insurance
  • Paid Time Off
  • Corporate Gym Membership

Additional Information:
Aalo Atomics provides a collaborative and supportive work environment, opportunities for professional growth, intellectually challenging careers, and competitive compensation. Aalo Atomics is an equal opportunity employer and considers all employment decisions without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, veteran status, or any other characteristic protected by law.
Applicants must be U.S. Citizens or U.S. Persons in compliance with 10 CFR Part 810 and may not hold non-compliant foreign citizenships.
Direct applicants only. No recruiters or staffing agencies, please.

Apply