ZipRecruiter

Log In

2

Entry Level Quality Control Inspector Jobs in Rochester, NY

Syntec Optics

Quality Inspector

Rochester, NY · On-site

Coordinate the flow of jobs through the Inspection Department to insure that we meet the scheduled ... Minimum two years experience in quality control. * Experience with operating or programming a ...

CYNET SYSTEMS

Inspector I

Rochester, NY · On-site

$14 - $19/hr

High School Diploma or GED. * 2 years experience in quality inspection. * Basic Computer Skills. * Excellent Communication Skills. Preferred Qualifications: * Experience with sheet and plate material.

Addman Engineering LLC

Quality Inspector

Ontario, NY

The Quality Inspector acts as a verification of molded parts to a pre-determined quality plan ... Understand and interpret SPC Data, including control limits and charts * Utilize six-sigma quality ...

ADDMAN ENGINEERING

Quality Inspector

Ontario, NY

The Quality Inspector acts as a verification of molded parts to a pre-determined quality plan ... Understand and interpret SPC Data, including control limits and charts * Utilize six-sigma quality ...

Addman Engineering

Quality Inspector

Ontario, NY · On-site

The Quality Inspector acts as a verification of molded parts to a pre-determined quality plan ... Understand and interpret SPC Data, including control limits and charts * Utilize six-sigma quality ...

ADDMAN Engineering LLC

Quality Inspector

Ontario, NY · On-site

The Quality Inspector acts as a verification of molded parts to a pre-determined quality plan ... Understand and interpret SPC Data, including control limits and charts * Utilize six-sigma quality ...

Mcalpin Industries Inc

Inspector 1

Macedon, NY · On-site

Understands and follows all quality procedures. * May require supervision to help determine the ... May inspect and sort during manufacturing process (in-process sorts). * Performs final inspection ...

Howmet Aerospace

Inspector - Temp to Hire

Rochester, NY · On-site

$19/hr

Inspection of Forged metal seamless rings for aerospace. Responsibilities: * Perform set-up of measuring and test equipment as needed to determine dimensional measurements required on customer or in ...

Graham Corporation

Quality Technician

Batavia, NY · On-site

$18.50 - $24/hr

Quality Control Supervisor FLSA Status & EEO Code: Non-Exempt & Division/Department: GHM/Quality ... Knowledge of proper inspection techniques required to obtain accurate results. * Perform ...

Graham Manufacturing

Quality Technician

Batavia, NY

$18.50 - $24/hr

Quality Control Supervisor FLSA Status & EEO Code: Non-Exempt & Division/Department: GHM/Quality ... Knowledge of proper inspection techniques required to obtain accurate results. * Perform ...

Graham Manufacturing

Quality Technician

Batavia, NY · On-site

$18.50 - $24/hr

Quality Control Supervisor FLSA Status & EEO Code: Non-Exempt & Division/Department: GHM/Quality ... Knowledge of proper inspection techniques required to obtain accurate results. * Perform ...

next page

Showing results 1-20

People also search for

All JobsEntry Level Quality Control Inspector JobsEntry Level Quality Control Inspector Jobs in Rochester, NY

Entry Level Quality Control Inspector information

See Rochester, NY salary details

$11

$21

$32

How much do entry level quality control inspector jobs pay per hour?

As of May 30, 2026, the average hourly pay for entry level quality control inspector in Rochester, NY is $21.19, according to ZipRecruiter salary data. Most workers in this role earn between $17.07 and $23.70 per hour, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as an Entry Level Quality Control Inspector, and why are they important?

To excel as an Entry Level Quality Control Inspector, you need keen attention to detail, basic math skills, and a high school diploma or equivalent. Familiarity with measurement tools like calipers, micrometers, and quality management systems (QMS) is typically required. Strong observation, communication, and teamwork skills help inspectors spot defects and collaborate effectively with production teams. These abilities are crucial for maintaining product standards, ensuring safety, and supporting efficient manufacturing processes.

What are some common challenges faced by entry level quality control inspectors, and how can they be addressed?

Entry level quality control inspectors often face challenges such as learning to identify subtle defects, understanding complex product specifications, and adapting to fast-paced production environments. To overcome these challenges, new inspectors can benefit from thorough training, seeking feedback from experienced colleagues, and consistently referencing quality standards. Collaborating closely with production and engineering teams also helps clarify expectations and improve inspection accuracy. With time and practice, inspectors typically develop sharper attention to detail and greater confidence in their assessments.

What does an Entry Level Quality Control Inspector do?

An Entry Level Quality Control Inspector is responsible for examining products and materials to ensure they meet specific standards of quality. This typically involves visual inspections, measuring products, and recording the results of tests. Inspectors may also identify defects, report issues to supervisors, and help maintain clean and safe work environments. Their work is essential for ensuring that only products meeting company and regulatory standards reach customers.

What is the difference between Entry Level Quality Control Inspector vs Quality Assurance Technician?

AspectEntry Level Quality Control InspectorQuality Assurance Technician
CertificationsBasic quality control certifications or on-the-job trainingOften requires certifications like ASQ CQPA or related training
Work EnvironmentManufacturing, production lines, warehousesLaboratories, production facilities, quality departments
Employer & Industry UsageManufacturing, automotive, electronicsPharmaceuticals, food production, manufacturing
Job FocusInspecting products for defects, measuring, testingDeveloping quality processes, audits, compliance

While both roles focus on quality, the Entry Level Quality Control Inspector primarily conducts product inspections and measurements on the production line. In contrast, the Quality Assurance Technician often works on developing and maintaining quality systems, performing audits, and ensuring compliance with standards. Both roles are essential in manufacturing but differ in scope and responsibilities.

What are the most commonly searched types of Quality Control Inspector jobs in Rochester, NY? The most popular types of Quality Control Inspector jobs in Rochester, NY are:
What are popular job titles related to Entry Level Quality Control Inspector jobs in Rochester, NY? For Entry Level Quality Control Inspector jobs in Rochester, NY, the most frequently searched job titles are:
What job categories do people searching Entry Level Quality Control Inspector jobs in Rochester, NY look for? The top searched job categories for Entry Level Quality Control Inspector jobs in Rochester, NY are:
What cities near Rochester, NY are hiring for Entry Level Quality Control Inspector jobs? Cities near Rochester, NY with the most Entry Level Quality Control Inspector job openings:
Entry Level Quality Control Inspector jobs near you
Quality Inspector

Quality Inspector

Syntec Optics

Rochester, NY • On-site

Full-time

Posted 13 days ago

Job description

Job Summary:

Conduct Quality Assurance audits and routine checks, tests, gauging and instrument inspections of materials, work in process and finished product. Assure company and product standards are maintained and product integrity is preserved. Consult with Quality Manager to resolve quality, production and efficiency problems. Function as an information source to various company departments when special and critical quality issues occur. Coordinate the flow of jobs through the Inspection Department to insure that we meet the scheduled customer ship date,

Essential Duties and Responsibilities:

  • Determines overall product quality by conducting and evaluating various visual and product tests for obvious defects.
  • Routinely completes and interprets inspection paperwork and blueprints including GD&T.
  • Inspects incoming jobs from sub-contractors for quality and product integrity.
  • Performs in-process, first piece inspection and first article using various measuring equipment.
  • Notifies Quality Manager when inspection data exceeds acceptable limits or when major incidents of poor quality are detected.
  • Ensures that all measuring equipment is calibrated within acceptable tolerances and time frame.
  • Assists in development of special department projects and work in conjunction with QA Manager.

Additional Responsibilities:

  • May cover for quality assurance personnel.
  • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency.
  • When requested, may work on special projects and various related assignments.
  • Performs other related to work duties and assignments as required.
  • May perform First Article Inspection from new or modified tooling.

Physical Demands and Work Environment:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low, moderate to loud.

Education, Skills and Experience:

  • Associates degree or equivalent in education and experience.
  • Minimum two years experience in quality control.
  • Experience with operating or programming a Sheffield or Zeiss CMM preferred.
  • Strong attention to detail
  • Strong math skills
  • Good oral and written communication skills.
  • Strong organization skills.
  • Must be familiar with computers and computer software.
  • Work independently with minimal supervision


This job description in no way states or implies that these are the only duties to be performed by this employee. He/she will be required to follow any other instructions and to perform any other responsible duties as requested by his/her supervisor.

Syntec Optics is an Equal Opportunity/Affirmative Action Employer. Applicants are free to apply without regard to race, color, religion, sex/gender, gender identity, sexual orientation, marital status, pregnancy, genetic information, citizenship status, national origin, age, disability or veteran status or any other Federal or State legally protected classes. Read our EOE Policy Statement.