ZipRecruiter

Log In

2

Entry Level Fitter Jobs (NOW HIRING)

Silver Ships Inc

Welder/Fitter Week Shift

Theodore, AL

$19.50 - $24.50/hr

Metal Fabrication Shop Requirements Fitter Level 3 * An entry level fitter lays out and fabricates simple aluminum structural parts, such as plates, bulkheads, frames, and small components, and then ...

Hayes & Stolz Industrial Manufacturing Co.

Be Seen First

Fabrication Fitter Helper

Burleson, TX · On-site

$17 - $19/hr

Hayes & Stolz is seeking a motivated and dependable Fabrication Fitter Helper to support our ... Experience: Entry level: on the job training provided * Certifications: Not required Company ...

Pacific Medical Inc.

Orthotic Fitter

Roseville, CA · On-site

$20 - $24/hr

This is an excellent entry level opportunity for the right candidate. Note: If Orthotic Fitter is hired, training to become certified through ABC/BOC will be needed to advance from an assistant to a ...

Pacific Medical Inc.

Orthotic Fitter

Roseville, CA · On-site

This is an excellent entry level opportunity for the right candidate. Note: If Orthotic Fitter is hired, training to become certified through ABC/BOC will be needed to advance from an assistant to a ...

Mountain Brace Systems

Certified Orthotic Fitter

Boise, ID · On-site

$20 - $36/hr

Certified Orthotic Fitter (COF) certification; certification costs covered if not currently certified Preferred Qualifications * Entry level or experienced in orthotic device fitting * Knowledge of ...

Industrial Manufacturing Company - North Alabama

Be Seen First

Pipe Fitter Welder Helper

Decatur, AL · On-site

$18 - $20/hr

Follow all safety protocols and compliance requirements Preferred Qualifications * Entry-level experience in pipe fitting and welding support * High school diploma or equivalent * Basic knowledge of ...

CDR General Services LLC

Fitter Helper

Port Allen, LA

$20 - $23/hr

This is an entry-level to semi-skilled position that supports fitters and fabrication operations by assisting with material handling, tool preparation, surface preparation, cutting, and fit-up ...

New

MB HAYNES Corporation

Pipefitter Assistant

Asheville, NC · On-site

$23.75 - $30.50/hr

In this entry level construction role, you will work under the direct supervision of a qualified Journeyman Pipefitter. Responsibilities include, but are not limited to; laying out, fabricating ...

MB HAYNES Corporation

Pipefitter Assistant

Asheville, NC · On-site

$23.75 - $30.50/hr

In this entry level construction role, you will work under the direct supervision of a qualified Journeyman Pipefitter. Responsibilities include, but are not limited to; laying out, fabricating ...

Wayne Brothers Companies

Pipefitter

Davidson, NC · On-site

$23.25 - $29.75/hr

Understanding fitting take-off, make-up and set-back in order to hit correct overall dimensions ... Basic level mathematics (Order of operations using fractions and decimals) * Entry level planning ...

MIRATECH Corporation

Fitter/Welder - 2nd Shift

Houston, TX · On-site

$20 - $25.25/hr

This position is 20% Welding and 80% Fitting. Shift: 2nd Shift, Monday - Thursday, 3:00 pm to 1:30 ... Competitive starting pay for entry-level candidates who pass the welding test. * Annual ...

next page

Showing results 1-20

All JobsFitter JobsEntry Level Fitter Jobs

Entry Level Fitter information

See salary details

$9

$22

$33

How much do entry level fitter jobs pay per hour?

As of Aug 10, 2026, the average hourly pay for entry level fitter in the United States is $22.70, according to ZipRecruiter salary data. Most workers in this role earn between $18.75 and $25.96 per hour, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as an entry level fitter, and why are they important?

To thrive as an Entry Level Fitter, you need a basic understanding of mechanical systems, manual dexterity, and a high school diploma or vocational training in a relevant field. Familiarity with hand and power tools, blueprint reading, and adherence to safety protocols are typically required, and some employers may prefer candidates with certifications such as a Certificate III in Engineering - Fabrication Trade. Attention to detail, strong problem-solving skills, and the ability to work collaboratively are important soft skills in this role. These skills and qualities ensure accurate assembly, efficient workflow, and a safe working environment in fabrication or construction settings.

What is the difference between Entry Level Fitter vs Apprentice Fitter?

AspectEntry Level FitterApprentice Fitter
Required CredentialsHigh school diploma or equivalent; basic technical skillsEnrolled in or completing apprenticeship program; technical training
Work EnvironmentManufacturing, construction sites, workshopsOn-the-job training under supervision, workshops, industrial settings
Employer & Industry UsageEmployers hire entry-level workers for basic fitting tasksEmployers hire apprentices for training and skill development

The main difference is that an Entry Level Fitter is a worker with basic skills ready to perform fitting tasks, while an Apprentice Fitter is in training, gaining skills through an apprenticeship program. Both roles are common in manufacturing and industrial sectors, but apprentices are still learning and require supervision, whereas entry-level fitters are expected to work independently with foundational skills.

What are some common challenges faced by entry level fitters during their first few months on the job?

Entry level fitters often encounter challenges such as adapting to the physical demands of the role, learning to interpret technical drawings accurately, and handling a variety of tools safely. Adjusting to the fast-paced environment and working effectively as part of a team are also important hurdles. With support from experienced colleagues and adherence to safety protocols, most new fitters quickly build confidence and competence in these key areas.

What does an entry level fitter do?

An Entry Level Fitter assists with assembling, installing, and maintaining mechanical systems or structures, often working with metal components and tools. They typically follow instructions from supervisors, measure and cut materials, and ensure that parts fit together correctly. This role is often hands-on and requires attention to detail, as well as the ability to read blueprints or technical drawings. Entry Level Fitters usually work under the guidance of experienced fitters or engineers to gain practical skills and knowledge in the trade.
More about Entry Level Fitter jobs
What cities are hiring for Entry Level Fitter jobs? Cities with the most Entry Level Fitter job openings:
What are the most commonly searched types of Fitter jobs? The most popular types of Fitter jobs are:
What states have the most Entry Level Fitter jobs? States with the most job openings for Entry Level Fitter jobs include:
What job categories do people searching Entry Level Fitter jobs look for? The top searched job categories for Entry Level Fitter jobs are:
Entry Level Fitter jobs near you
Infographic showing various Entry Level Fitter job openings in the United States as of August 2026, with employment types broken down into 2% As Needed, 91% Full Time, 3% Part Time, 2% Contract, and 2% Nights. Highlights an 99% Physical, and 1% Remote job distribution, with an average salary of $47,216 per year, or $22.7 per hour.

Welder/Fitter Week Shift

Silver Ships Inc

Theodore, AL

$19.50 - $24.50/hr

Full-time

Medical, PTO

Re-posted 26 days ago

Job description

Job Requirements
Aluminum Welding Shop
Welder Level 3
  • Has nominal aluminum welding experience or passed the AIDT welding course.
  • Can perform simple welding task that has little to no quality requirements.
  • Has the aptitude and desire to learn the welding process directed by Silver Ships Inc.

Welder Level 2
  • Every skill set from Welder Level 3
  • Has the ability to weld to a certain standard instructed by his/her supervisor based on the projects welding requirements.
  • Has minimum weld deficiencies that require rework.
  • Has the ability to repair any weld deficiencies in a timely matter.
  • Complies to the companies welding, safety, and quality standards.

Welder level 1
  • Every skill set from Welder Level 2
  • Proficient in Pulse aluminum GMAW and or GTAW
  • Can weld in accordance with given weld schedule depicted on blueprints with little to no supervision required.
  • Can pass the certified welder test based on ABS and CWI standards from FMS.
  • Must be able to perform basic maintenance and repairs on the welding machines required to perform his/her job.

Physical Requirements for all levels: Must be able to lift up to 50lbs. Must be able to stand, bend, stoop, squat or kneel regularly, as well as climb stairs and ladders to complete tasks. Must be able to change your own shielding gas bottle required for welding.
Metal Fabrication Shop Requirements
Fitter Level 3
  • An entry level fitter lays out and fabricates simple aluminum structural parts, such as plates, bulkheads, frames, and small components, and then tack welds them in position within the hull or assembly of the vessel.
  • Has the ability to work from a blueprint on simple fabricating tasks with constant intermediate supervision from either a foreman or senior fabricator.
  • Has less than one year of experience in the aluminum fabricating field.

Fitter Level 2
  • Every skill set from Fitter Level 3
  • Has the ability to work from a blueprint on most standard fabricating tasks with occasional supervision from either a foreman or senior fabricator.
  • Has more than a year of experience in the aluminum fabricating field.

Fitter level 1
  • Every skill set from Fitter Level 2
  • Has the ability to work from a blueprint on all fabricating task, including complicated hull designs and components without any supervision from a foreman or senior fabricator.
  • Can be called upon to supervise or advise lesser skilled employees working on similar projects.
  • Can perform tasks or projects in the projected or estimated time based on the production schedule.
  • Quality is without question.
  • Must be able to perform basic maintenance and repairs on the welding machines required to perform his/her job.

Physical Requirements for all levels: Must be able to lift up to 50lbs. Must be able to stand, bend, stoop, squat or kneel regularly, as well as climb stairs and ladders to complete tasks. Must be able to change your own shielding gas bottle required for stitch welding.
Benefits
• Multiple Healthcare packages
• Sick Leave and Paid Time Off accrual
• Several Paid Holidays a year

Apply