1

Embroidery Machine Operator Jobs in New Mexico (NOW HIRING)

Operator 4/5

Los Alamos, NM · On-site

$16 - $21/hr

Sets up and runs diagnostic test and reacts appropriately to the messages and reports errors or machine malfunctions as required. May work with and be responsible for multiple systems. Operator 5 ( ...

Operator 4/5

Los Alamos, NM

$16 - $21/hr

Sets up and runs diagnostic test and reacts appropriately to the messages and reports errors or machine malfunctions as required. May work with and be responsible for multiple systems. Operator 5 ( ...

Operator 4/5

Los Alamos, NM · On-site

$16 - $21/hr

Sets up and runs diagnostic test and reacts appropriately to the messages and reports errors or machine malfunctions as required. May work with and be responsible for multiple systems. Operator 5 ( ...

The primary responsibility of the Operator is to operate various equipment and machines on the production floor in a safe and efficient manner. * The Operator is responsible for * Visual quality ...

The Hydrovac Operator uses technical skills daily to operate complex excavation machinery with precision and care, ensuring that underground utilities are exposed without damage. Safety skills are ...

Cheese Operator

Clovis, NM

$15 - $19.75/hr

Oversees operation of the wraparound machine, troubleshooting any issues. * Identify and correct ... Facilitate or oversee training and standard operating procedure reviews to ensure new hires develop ...

Cheese Operator

Clovis, NM · On-site

$15 - $19.75/hr

Oversees operation of the wraparound machine, troubleshooting any issues. * Identify and correct ... Facilitate or oversee training and standard operating procedure reviews to ensure new hires develop ...

Operator I-III

Albuquerque, NM · On-site

$17.25 - $23/hr

High school diploma or GED QUALIFICATIONS YOU'LL BRING AS OPERATOR II, PRODUCTION: * High school ... Work in a production environment with noise, moving machinery, and varying environmental conditions

Operator I-III

Albuquerque, NM · On-site

$17.25 - $23/hr

High school diploma or GED QUALIFICATIONS YOU'LL BRING AS OPERATOR II, PRODUCTION: * High school ... Work in a production environment with noise, moving machinery, and varying environmental conditions

Operator

Deming, NM · On-site

$17/hr

Operator Last Update : September 2025 FLSA Status : Non-Exempt Manager : Designated Site Supervisor/Manager JOB SUMMARY The Operator performs specified tasks at the facility to meet safety, quality ...

OPERATOR

Ohkay Owingeh, NM

$17.75 - $23.25/hr

SUMMARY The Operator drives gasoline or diesel-powered tractor to move materials, draw implements, tow trailers, pull out objects embedded in ground, or pull cable of winch to raise, lower, or load ...

Operator

Santa Teresa, NM · On-site

$16 - $21.50/hr

Reporting to the Process Supervisor or Manager Operations, the Operator is responsible for monitoring the system which includes observing pressure, temperature and relative humidity measurements on ...

Operator

Santa Teresa, NM · On-site

$16 - $21.50/hr

Reporting to the Process Supervisor or Manager Operations, the Operator is responsible for monitoring the system which includes observing pressure, temperature and relative humidity measurements on ...

RIE is looking for a dependable, hardworking Electropolish Operator to join our metal finishing team. If you enjoy hands-on work, take pride in producing high-quality products, and want to build a ...

RIE is looking for a dependable, hardworking Electropolish Operator to join our metal finishing team. If you enjoy hands-on work, take pride in producing high-quality products, and want to build a ...

Midstream Operator

Carlsbad, NM · On-site

$88.83/hr

Job Title Midstream Operator Compensation $88.83/hr - 1099 $50/day vehicle allowance - personal vehicle required Location 5315 Buena Vista Drive Carlsbad, NM 88220 Coverage Area: Carlsbad, NM / Pecos ...

Midstream Operator

Carlsbad, NM · On-site

$88.83/hr

Job Title Midstream Operator Compensation $88.83/hr - 1099 $50/day vehicle allowance - personal vehicle required Location 5315 Buena Vista Drive Carlsbad, NM 88220 Coverage Area: Carlsbad, NM / Pecos ...

Midstream Operator

Carlsbad, NM · On-site

$88.83/hr

Job Title Midstream Operator Compensation $88.83/hr - 1099 $50/day vehicle allowance - personal vehicle required Location 5315 Buena Vista Drive Carlsbad, NM 88220 Coverage Area: Carlsbad, NM / Pecos ...

next page

Showing results 1-20

Embroidery Machine Operator information

See New Mexico salary details

$9

$15

$20

How much do embroidery machine operator jobs pay per hour?

As of Aug 18, 2026, the average hourly pay for embroidery machine operator in New Mexico is $15.99, according to ZipRecruiter salary data. Most workers in this role earn between $13.99 and $17.69 per hour, depending on experience, location, and employer.

What does an embroidery machine operator do?

An Embroidery Machine Operator is responsible for running and maintaining embroidery machines to decorate garments, fabrics, or other materials with specific designs. Their tasks include setting up machines, loading materials, monitoring production for quality, and making adjustments as needed. They may also be responsible for basic machine maintenance and troubleshooting. This role requires attention to detail, a steady hand, and the ability to follow design specifications closely.

What are some common challenges faced by embroidery machine operators and how can they be managed?

Embroidery Machine Operators often encounter challenges such as machine thread breakage, design misalignment, and keeping up with production deadlines. To manage these issues, it's important to regularly maintain and clean the machines, follow precise setup instructions for each job, and communicate closely with team members in design and quality control. Staying organized and attentive to detail helps ensure high-quality results and smooth workflow, making the role both rewarding and dynamic.

What are the key skills and qualifications needed to thrive as an embroidery machine operator, and why are they important?

To thrive as an Embroidery Machine Operator, you need strong attention to detail, manual dexterity, and experience with textile or garment production, often supported by a high school diploma or equivalent. Familiarity with commercial embroidery machines, digitizing software, and basic machine maintenance is typically required. Good communication, time management, and problem-solving skills help operators efficiently handle custom orders and troubleshoot issues. These skills ensure high-quality embroidered products, minimize errors, and maintain smooth production workflows.

What is the difference between Embroidery Machine Operator vs Sewing Machine Operator?

AspectEmbroidery Machine OperatorSewing Machine Operator
CredentialsMay require basic training or certification in embroidery techniquesTypically requires basic sewing skills, sometimes certification in industrial sewing
Work EnvironmentManufacturing or textile companies focusing on decorative stitchingGarment factories, upholstery, or textile production
Industry UsageUsed mainly in apparel, promotional items, and decorative textilesUsed in clothing manufacturing, upholstery, and fabric production
Job FocusDesigning and operating embroidery machines for decorative stitchingOperating sewing machines for assembling fabrics and garments

While both roles involve operating sewing-related machinery, Embroidery Machine Operators focus on decorative stitching and embroidery designs, often requiring specific training. Sewing Machine Operators handle general sewing tasks in manufacturing, with a broader focus on garment assembly. Understanding these differences helps in choosing the right career path or job search focus.

What are the most commonly searched types of Embroidery Machine Operator jobs in New Mexico?

The most popular types of Embroidery Machine Operator jobs in New Mexico are:

What job categories do people searching Embroidery Machine Operator jobs in New Mexico look for?

The top searched job categories for Embroidery Machine Operator jobs in New Mexico are:

What cities in New Mexico are hiring for Embroidery Machine Operator jobs?

Cities in New Mexico with the most Embroidery Machine Operator job openings:

What are popular job titles related to Embroidery Machine Operator jobs in NM?

For Embroidery Machine Operator jobs in NM, the most frequently searched job titles are:

Infographic showing various Embroidery Machine Operator job openings in New Mexico as of August 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution, with an average salary of $33,264 per year, or $16 per hour.

$16 - $21/hr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 17 days ago


Los Alamos National Laboratory rating

9.2

Company rating: 9.2 out of 10

Based on 33 frontline employees who took The Breakroom Quiz

8th of 120 rated laboratories


Job description

Description
Job Title Operator 4/5
Location Los Alamos, NM, US
Organization Name TA55-OPS2/TA-55 Facility Operations
Minimum Salary
Maximum Salary
This position is open for external candidates only to apply.
What You Will Do
This position will be filled at either Facility Operations Technician 4/5 level, depending on the skills of the selected candidate. Additional job responsibilities (outlined below) will be assigned if the candidate is hired at the higher level.
This position will report to the TA-55 Equipment Operations Supervisor and will perform the required tasks assigned by the supervisor. The Facility Operations Technician 4/5 (experience-dependent) will be responsible for providing support for the day-to-day operations of ALDWP facilities at TA55.
Operator 4 ($71,200- $112,900)
Fully qualified, experienced operator as defined by the organizations training and qualification program. Operates and monitor critical safety systems according to operating instructions. Responsible for safe execution of technical safety requirement surveillances or surveillances required to meet safety / authorization basis requirements. Performs technical tasks in support of operations, maintenance, science, or engineering activities. Provides direct support in operations, specification, construction, and/or design of facility mechanical, electrical, and/or chemical systems. Checks and inspects operation and maintenance against predetermined standards. Follows process sheets or written / verbal directions. Observes equipment and control panels for operator messages or error indicators. Sets up and runs diagnostic test and reacts appropriately to the messages and reports errors or machine malfunctions as required. May work with and be responsible for multiple systems.
Operator 5 ($85,900 - $139,900)
In addition to what was outlined at the lower level, at this level, a fully qualified operator is regarded as a facility expert and operates and monitors critical safety systems according to operating instructions. Recognized as the facility lead on off-shifts and required to make technical decisions regarding safe operations of nuclear facilities. Performs technical tasks in support of operations, maintenance, science or engineering activities. Provides direct support in operations, specification, construction, and/or design of facility mechanical, electrical, and/or chemical systems. Checks and inspects operation against predetermined standards. Follows process sheets or written / verbal directions. Observes equipment and control panels for operator messages or error indicators. Sets up and runs diagnostic test and reacts appropriately to the messages and reports errors or machine malfunctions as required.
#Shiftwork
What You Need
Minimum Job Requirements:
  • Extensive experience and understanding of the following aspects of equipment operations:

  • Verbatim procedure compliance
  • Hazard identification and analysis
  • Configuration management

  • Extensive knowledge of typical facility instrumentation and control, electrical and mechanical systems, sub-systems, and components (heating, ventilation, refrigeration systems, cooling towers, fire suppression/alarm systems, air compressors, pneumatic controls, etc.)
  • Extensive experience troubleshooting and diagnosing service problems and determining procedure to repair.
  • Demonstrated experience reading, understanding and explaining engineering, electrical, and mechanical drawings/specifications.
  • Excellent interpersonal, written, and verbal communication

Additional Job Requirements for Operator 5:
In addition to the requirements outlined above, qualification at the higher level requires:
  • Expert understanding of and ability to identify work hazards, safety practices, operating configuration.
  • Expert experience with lock-out/tag-out policies and procedures.

Training/Certifications: The Technician will be assigned the Equipment Operator qualification, will be assigned as a Glovebox Level 1 operator for PF-4 trolley troubleshooting and will be eligible to participate in additional pay programs when the required criteria are met.
Education/Experience at Operator 4 level: Requires a relevant Associates Degree and 5 years of related experience, or an equivalent combination of education and experience directly related to the occupation.
Education/Experience at Operator 5 level: Requires an Associate's Degree in a relevant field and 7 years of related experience, or an equivalent combination of education and experience directly related to the occupation. At this level, additional training and certification, may be expected.
DOE Order 426.2: Requires High School Diploma
Desired Qualifications:
  • Knowledge and understanding of Limiting Conditions of Operation (LCO) as specified in the Technical Safety Requirements (TSR) while performing surveillances or assigned tasks.
  • Understanding of the concepts and principles of Integrated Work Management, Integrated Safety Management (ISM) and Integrated Safeguards and Security Management (ISSM), or equivalent non-DOE programs.
  • Working knowledge with Conduct of Operations as applied to a Nuclear Facility and maintaining a Nuclear Facility

Work Schedule:
This position may require 24/7 coverage, which could involve working a shift/weekend schedule. Employees maybe eligible for shift differential pay when assigned by their manager. Shift/weekend assignments are at the discretion of the manager.
Work Location : The work location for this position is onsite and located in Los Alamos, NM. All work locations are at the discretion of management.
Position commitment: Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year.
Note to Applicants:
For full consideration, please provide a comprehensive resume, which outlines how you meet the minimum and desired skills noted above.
Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory.
Where You Will Work
Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes:
§ PPO or High Deductible medical insurance with the same large nationwide network
§ Dental and vision insurance
§ Free basic life and disability insurance
§ Paid childbirth and parental leave
§ Award-winning 401(k) (6% matching plus 3.5% annually)
§ Learning opportunities and tuition assistance
§ Flexible schedules and time off (PTO and holidays)
§ Onsite gyms and wellness programs
§ Extensive relocation packages (outside a 50 mile radius)
Additional Details
Directive 206.2 - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2 . Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A.
Clearance: Q (Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements* for access to classified matter. This position requires a Q clearance. and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad.
*Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 for additional information.
426.2: This position is subject to DOE Order 426.2, Personnel Selection, Training, and Qualification Requirements for DOE Nuclear Facilities, which establishes entry-level requirements to ensure candidates selected for specific positions can successfully perform the requirements of the job.
New-Employment Drug Test: The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer.
Regular position: Term status Laboratory employees applying for regular-status positions are converted to regular status.
Equal Opportunity: Los Alamos National Laboratory is an equal opportunity employer. All employment practices are based on qualification and merit, without regard to protected categories such as race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal, state, and local laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to applyhelp@lanl.gov or call (505)-664-6947 opt. 3.
Employment Status Full Time
Appointment Type Regular
Regular
Contact Details
Contact Name Montano, Sarita Nichole
Email saritam@lanl.gov
Work Telephone

What Los Alamos National Laboratory employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom