ZipRecruiter

Log In

1

Electronic Rework Technician Jobs in Dallas, TX (NOW HIRING)

IMS People

Be Seen First

Debug Test Technician

Carrollton, TX · On-site

$16 - $21/hr

Diagnose, troubleshoot, and repair electronic and mechanical hardware and software issues using ... Perform component-level repair and rework on PCBAs, including replacing SMT components and ...

Luxor Staffing

Coating Technician

Garland, TX · On-site

$18 - $22/hr

  • Medical

  • Dental

  • Vision

  • Life

Perform touch-ups using manual hand-brush techniques and safely remove coating for component rework ... electronics manufacturing environment. · Technical Knowledge: · Familiarity with IPC-A-610 and ...

Coast Personnel

SMT Operators

Carrollton, TX · On-site

$17 - $22.50/hr

Inspect boards for quality and IPC standards compliance * Assist with hand soldering and rework as ... SMT Operator | PCB Technician | Electronics Assembler | Pick and Place Operator | Manufacturing ...

Omni Aircraft Maintenance

Avionics Install Technician - TKI

Mckinney, TX · On-site

$26.75 - $34.75/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

... panel rework that leaves our floor. If precision wiring, systems troubleshooting, and exacting ... Avionics factory training, electronics coursework, or equivalent hands-on experience in lieu of ...

zahgroup

Senior Test Lab Technician

Mansfield, TX · On-site

... soldering/rework of complex PCB/PBCA and IPC610 trained or certified. (where applicable) 11 ... Utilization of complex electronic test and measurement equipment with no supervision. (where ...

FormFactor, Inc.

Probe Technician

Farmers Branch, TX · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Support probe card assembly, rework, repair, and maintenance activities in accordance with ... Associate degree in Electrical Engineering, Mechanical Engineering Technology, Electronics ...

Formfactor

Probe Technician

Farmers Branch, TX · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Support probe card assembly, rework, repair, and maintenance activities in accordance with ... Associate degree in Electrical Engineering, Mechanical Engineering Technology, Electronics ...

Formfactor

Probe Technician

Farmers Branch, TX

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Support probe card assembly, rework, repair, and maintenance activities in accordance with ... Associate degree in Electrical Engineering, Mechanical Engineering Technology, Electronics ...

SCHLUTER SYSTEMS L.P.

Quality Control Technician I

Northlake, TX

$18 - $23/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

... Rework nonconforming parts when reasonably feasible, such as re-bagging, re-labeling, re-boxing ... electronic) Label, organize and track test parts Identify the acceptance status (accept/reject QC ...

previous pagenext page

Showing results 21-40

All JobsElectronic Rework Technician JobsElectronic Rework Technician Jobs in Dallas, TX

Electronic Rework Technician information

See Dallas, TX salary details

$29.2K

$60.2K

$94.5K

How much do electronic rework technician jobs pay per year?

As of Aug 18, 2026, the average yearly pay for electronic rework technician in Dallas, TX is $60,188.00, according to ZipRecruiter salary data. Most workers in this role earn between $45,500.00 and $69,200.00 per year, depending on experience, location, and employer.

What is an electronic rework technician?

Electronic Rework Technicians are specialized professionals who repair, modify, or rework electronic assemblies and circuit boards. They use tools like soldering irons, microscopes, and precision instruments to remove, replace, or fix faulty components on printed circuit boards (PCBs) or other electronic equipment. Their work is essential in manufacturing, quality control, and after-sales service to ensure products meet required standards and function properly. These technicians often follow strict industry guidelines and may also perform diagnostic tests to identify issues before performing repairs.

What skills and qualifications are needed to be an electronic rework technician?

To thrive as an Electronic Rework Technician, you need a solid understanding of electronics, soldering techniques, and component-level troubleshooting, typically gained through technical training or an associate’s degree in electronics. Familiarity with tools such as soldering irons, multimeters, oscilloscopes, and rework/reflow stations, as well as IPC certification (like IPC-7711/7721), is often required. Attention to detail, manual dexterity, and effective communication are soft skills that set top performers apart. These skills ensure precise repairs, minimize errors, and maintain high standards in electronic assembly and refurbishment.

What are common challenges faced by electronic rework technicians, and how can they be addressed?

Electronic Rework Technicians often encounter challenges such as troubleshooting complex circuit board issues, working with delicate components, and ensuring repairs meet strict quality standards. Staying up-to-date with the latest soldering techniques and industry best practices can help address these challenges. Additionally, collaborating closely with engineering and quality assurance teams ensures that repairs are done correctly and efficiently. Clear documentation and effective communication are also key to maintaining workflow and minimizing errors.

What is the difference between Electronic Rework Technician vs Electronics Assembler?

AspectElectronic Rework TechnicianElectronics Assembler
CredentialsTypically requires technical certifications or training in electronics repairUsually requires a high school diploma or equivalent, with on-the-job training
Work EnvironmentWorks in repair labs, manufacturing facilities, or electronics repair shopsWorks on assembly lines or in manufacturing settings
Job FocusDiagnosing, repairing, and reworking electronic components and circuit boardsAssembling electronic devices and components
Industry UsageCommon in electronics repair, manufacturing, and quality controlPrimarily in electronics manufacturing and production

The Electronic Rework Technician specializes in repairing and reworking electronic circuit boards, often requiring technical certifications. In contrast, the Electronics Assembler focuses on assembling electronic products, typically with less formal certification. Both roles are vital in electronics manufacturing but differ in their primary tasks and work environments.

What are popular job titles related to Electronic Rework Technician jobs in Dallas, TX?

For Electronic Rework Technician jobs in Dallas, TX, the most frequently searched job titles are:

What job categories do people searching Electronic Rework Technician jobs in Dallas, TX look for?

The top searched job categories for Electronic Rework Technician jobs in Dallas, TX are:

What cities near Dallas, TX are hiring for Electronic Rework Technician jobs?

Cities near Dallas, TX with the most Electronic Rework Technician job openings:

Electronic Rework Technician jobs near you
Infographic showing various Electronic Rework Technician job openings in Dallas, TX as of August 2026, with employment types broken down into 88% Full Time, and 12% Contract. Highlights an 98% In-person, and 2% Remote job distribution, with an average salary of $60,188 per year, or $28.9 per hour.

Assembler opportunity at McKinney, TX

Indotronix International Corporation

Mckinney, TX • On-site

$24.99/hr

Contractor

Re-posted 22 days ago

Job description

Indotronix is seeking a Assembler for a Job Opportunity in McKinney, TX
 
Job Title: Assembler
Location: McKinney, TX
Duration: 9 Months Contract
Pay Rate: $24.99/hr on W2

Shift: 2nd Shift
Work Schedule: 9/80 A Schedule
Hours: 2:00 PM – 11:30 
 
Job Description:
The Assembler will perform a wide variety of tasks supporting a fast-paced manufacturing and production environment. Responsibilities include assembly, disassembly, reassembly, fabrication, repair, and inspection of electronic, electrical, and mechanical systems and assemblies.
This role requires strong technical aptitude, attention to detail, and the ability to follow detailed work instructions while maintaining quality and production standards.
 
Key Responsibilities
Perform assembly and rework of electronic and mechanical assemblies
Conduct material preparation and component installation
Perform wire and cable preparation, installation, crimping, and torquing using hand tools and instruments
Set up and operate manufacturing equipment, machines, and hand tools
Route, dispatch, and expedite material flow as required
Perform in-process inspections to ensure compliance with company and customer standards
Verify work accuracy and adherence to written work instructions
Support repair, fabrication, and inspection activities
Maintain productivity while performing repetitive manufacturing processes
Collaborate with production teams to meet schedule and delivery targets
Shift job assignments based on production needs
 
Required Qualifications
Minimum 2+ years of applicable manufacturing or technical experience
Experience working within manufacturing databases or automation systems such as: VM/CMES/SAP or similar systems
Strong hand/finger dexterity and exceptional attention to detail
Ability to interpret and follow detailed work instructions and quality standards
Basic computer and mathematical skills
Experience using common hand tools and torque instruments: Screwdrivers/Ratchets/Sockets/Torque tools and analyzers
Ability to multitask and adapt to changing production priorities
Strong communication and teamwork skills
Demonstrated time management and continuous improvement mindset
Positive attitude and professional interpersonal skills
Physical Demands
Ability to perform repetitive assembly tasks for extended periods of time
Frequent use of hands and fingers requiring fine motor skills and manual dexterity
Ability to sit or stand for prolonged periods throughout the shift
May be required to bend, stoop, kneel, reach, and twist during assembly and inspection activities
Ability to lift, carry, push, or pull materials and equipment up to 25–35 pounds occasionally
Visual acuity required for detailed inspection of small components and assemblies
Ability to work with small tools, wiring, and precision instruments
Capability to work in a manufacturing environment that may include moderate noise levels and moving equipment
Must be able to wear required Personal Protective Equipment (PPE), including safety glasses, gloves, and other protective gear as required
 
Additional Job Details:     
Preferred Background Experience in one or more of the following environments: Manufacturing or Production Aerospace or Defense Aviation Maintenance Naval or Military Technical Roles Electronics Assembly or Repair Highly Desired U.S. Navy Ratings: Aviation Electrician (AE) Aviation Electronics Technician (AT) Electronics Technician (ET) Fire Controlman (FC) Fire Control Technician (FT) Technical Experience Preferred Hands-on experience using: Multimeter Oscilloscope (O-Scope) Spectrum Analyzer Candidates should demonstrate troubleshooting experience involving electronic or electrical systems.
Indotronix logo

About Indotronix

Sourced by ZipRecruiter

In 1986, Indotronix established itself in the staffing space. 22 years later, Avani entered the scene, offering consulting and technology development. Finally, in 2016, the two joined forces to begin delivering talent across all areas, from Staffing to Consulting to unique platform development.

Industry

Recruiting and staffing services

Company size

1,001 - 5,000 Employees

Headquarters location

Rochester, NY, US

View All Indotronix Jobs