ZipRecruiter

Log In

1

Electronic Controls Technician Jobs in Riverside, CA

Samuel

Maintenance Mechanic 2 (2nd Shift)

Fontana, CA · On-site

$35.66 - $38/hr

As an Industrial Electro-Mechanical Technician, you should have experience with a combination of ... Electrical (industrial 480 volts) and electronic controls (VFD, servomotors, proportional valves ...

Aerotek

Solder Technician

Rialto, CA

$18.25 - $23/hr

Analyze electronic issues down to the component level using appropriate test methods and tools ... controls. The role requires the physical ability to lift, push, and pull up to 50 lbs., as well as ...

Aerotek

Solder Technician

Rialto, CA

$18.25 - $23/hr

Analyze electronic issues down to the component level using appropriate test methods and tools ... controls. The role requires the physical ability to lift, push, and pull up to 50 lbs., as well as ...

Aerotek

Solder Technician

Rialto, CA

$18.25 - $23/hr

Analyze electronic issues down to the component level using appropriate test methods and tools ... controls. The role requires the physical ability to lift, push, and pull up to 50 lbs., as well as ...

Aerotek

Assembler - Solder Technician

Rialto, CA · On-site

$18.25 - $23/hr

Analyze electronic issues down to the component level using appropriate test methods and tools ... controls. The role requires the physical ability to lift, push, and pull up to 50 lbs., as well as ...

Envista Holdings Corporation

Technician 1

Yorba Linda, CA

$25.60 - $31.20/hr

Monitors meters, gauges, valves, flow ratios, temperatures, pressures, and related controls and ... Understand eDHR (Electronic Device History Record) * Understands and complies with all safety and ...

New

Nucor

Shift Electrician

Fontana, CA · On-site

$44.82/hr

Minimum 3 years of industrial/manufacturing experience as an electrician, electronics technician ... Experience with automation, process controls, power distribution, and computerized control systems.

previous pagenext page

Showing results 21-40

All JobsElectronic Controls Technician JobsElectronic Controls Technician Jobs in Riverside, CA

Electronic Controls Technician information

See Riverside, CA salary details

$20

$35

$50

How much do electronic controls technician jobs pay per hour?

As of Aug 15, 2026, the average hourly pay for electronic controls technician in Riverside, CA is $35.44, according to ZipRecruiter salary data. Most workers in this role earn between $30.10 and $39.62 per hour, depending on experience, location, and employer.

What is the difference between Electronic Controls Technician vs Industrial Maintenance Technician?

AspectElectronic Controls TechnicianIndustrial Maintenance Technician
CertificationsElectronics or controls-related certifications, such as IPC certificationsGeneral maintenance certifications, such as HVAC or mechanical certifications
Work EnvironmentManufacturing plants, automation facilities, control panel assemblyFactories, equipment repair, machinery maintenance
Industry UsageAutomation, electronics, control systemsMechanical systems, equipment upkeep
Common Search/ComparisonElectronic Controls Technician vs Industrial Maintenance Technician

The Electronic Controls Technician primarily focuses on installing, troubleshooting, and maintaining electronic control systems and automation equipment. In contrast, the Industrial Maintenance Technician has a broader scope, including mechanical repairs and general equipment maintenance. Both roles are essential in manufacturing environments, but the Electronic Controls Technician specializes more in electronic and control systems, making their skills more specific to automation and electronics.

What are popular job titles related to Electronic Controls Technician jobs in Riverside, CA?

For Electronic Controls Technician jobs in Riverside, CA, the most frequently searched job titles are:

What job categories do people searching Electronic Controls Technician jobs in Riverside, CA look for?

The top searched job categories for Electronic Controls Technician jobs in Riverside, CA are:

What cities near Riverside, CA are hiring for Electronic Controls Technician jobs?

Cities near Riverside, CA with the most Electronic Controls Technician job openings:

Electronic Controls Technician jobs near you

Foundry Maintenance Mechanic 2 (3rd Shift)

Samuel, Son & Co (USA), Inc.

Riverside, CA • On-site

$35.66 - $38/hr

Full-time

Re-posted 21 days ago

Samuel, Son & Co. rating

8.2

Company rating: 8.2 out of 10

Based on 42 frontline employees who took The Breakroom Quiz

88th of 540 rated manufacturers

Job description


Sunday - Friday
3rd Shift - 9:00pm - 7:30am (overtime as needed)
Responsibilities
  • Maintain production machines, equipment, and facilities performance (Safety, Quality, Efficiency, Availability and Reliability
  • Provide emergency and unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment.
  • Perform maintenance skills level 2 (Matrix Skill File) including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines.
  • Read and interpret equipment manuals and work orders to perform required maintenance and service.
  • Diagnose problems, replace, or repair parts, test, and adjust equipment.
  • Perform regular preventative maintenance on machines, equipment, and facilities.
  • Perform a variety of plumbing maintenance functions.
  • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties.
  • Detect faulty operations, defective material, and report issues or unusual situations to proper maintenance supervisor.
  • Comply with health and safety regulations and maintain clean and orderly work areas.
  • Adheres to training program and any relevant training through the Operations Trainer.
  • Perform preventive and proactive maintenance, regular inspections, communicate with production operator and foreman about equipment performance and problems affecting production lines.
  • Ability to train and share knowledge to coworkers.
  • Other responsibilities as dictated by the Maintenance Supervisor.
  • 100% Daily work reporting right information on CMMS (Manager Plus)
  • Good communication and collaboration with colleagues working different shifts, ensuring smooth handovers, and sharing relevant information.
  • The ability to adapt to varying shift lengths and workdays (8 - 12-hour shifts and weekends)

Education
  • High school education or GED equivalent

Qualifications
  • As an Industrial Electro-Mechanical Technician, you should have experience with a combination of mechanical and electrical maintenance skills and are responsible for performing routine inspections, repairs, and upgrades on industrial equipment.
  • Minimum of five (5) years maintenance experience in the following trades
  • Pneumatic, Hydraulic, Electrical, Mechanical, and/or PLCs
  • Problem-solving, critical thinking, and the ability to work with both hand/power tools and software components.
  • Technical knowledge of equipment/machine processes.
  • Thorough knowledge of electrical theory for power and controls
  • Wide knowledge of hydraulics, pneumatics, machine controls devices, VFD, PLCs & electrical components
  • Ability to work OT, off-shifts, & weekends
  • Combustion processes, burners, valve trains, temperature controllers
  • Welding and fabricating
  • Refractory and furnace lining.
  • Basic computer entry skills
  • Health and Safety Standards and Compliance
  • Process Improvement Techniques
  • Electrical (industrial 480 volts) and electronic controls (VFD, servomotors, proportional valves, electrical motor control, PLC); PLC troubleshooting level.
  • Mobile equipment including forklifts and wheel loaders.
  • Material handling, conveyors
  • Ventilation systems with 50-250 HP motor Bag houses (dust collectors)
  • Critical thinking and problem-solving skills.
  • Good service attitude and willingness to solve problems.
  • Strengths in teamwork, organization, communication, and efficiency.
  • Time Management: Effective time management skills to stay focused, prioritize tasks, and maintain productivity throughout the entire shifts.

WORKING CONDITIONS
  • This position works in a manufacturing environment.
  • Work is performed in a manufacturing environment in all weather conditions.
  • Lift up to 25 lbs. regularly, up to 50 lbs. frequently and up to 75 lbs. occasionally
  • Bend, twist, climb, squat, kneel throughout shift Able to work in extreme heat or cold conditions.
  • Ability to function successfully in a fast-paced, changing work environment.
  • Use hands for simple and power grasping as well as push/pull and fine manipulation.
  • Work at and/or below shoulder level.
  • Ability to work next to hot surfaces (using proper PPE for hot works)
  • Available to work weekends and holidays.

The pay for this position is $35.66 - $38.00. If you are hired, your base salary will be determined based on factors such as geographic locations, skills, education, and/or experience. In addition to those factors, we believe in the importance of pay equity and consider internal equity of our current team members as part of any final offer.
About Us
At Samuel, we believe every team member brings unique and valuable skills, experiences and knowledge to our thriving business - enabling us to build on over 170 years of success in the metals industry. We offer countless opportunities for our team members to develop and grow in their careers, empower them to make decisions on the job and be a part of driving positive change - within our organization and in the communities where we live and work. If you're seeking a dynamic, supportive and welcoming workplace to make your mark and grow your career, we have the programs, culture and opportunities to make it happen. We're stronger together.
At Samuel we believe in a culture of equality. Respect and integrity are at our core. We are committed to building and creating an environment that is open and welcoming for everyone.
This job posting is for an existing vacancy within the organization
Samuel is an Equal Opportunity Employer. In the United States, we utilize E-Verify.
About the Team
Sierra Aluminum is a vertically integrated aluminum extrusion mill providing standard, custom and OEM aluminum products that range from basic mill finished extrusions all the way to finished, fabricated shapes. With in-house value added services such as anodizing, painting, thermal improvement, fabrication and specialized packaging, we ensure consistent quality products delivered on time.

What Samuel, Son & Co. employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply