ZipRecruiter

Log In

1

Control Panel Operator Jobs in Texas (NOW HIRING)

Verstela

Assembler | 1st Shift

Garland, TX

$19/hr

Assembling control panels, switchgear, switchboards, and ATS units from diagrams and schematics * Use hand and power tools to assemble parts * Inspecting and testing finished assemblies * Operating ...

Verstela

Assembler | 2nd Shift

Plano, TX

$19/hr

Assembling control panels, switchgear, switchboards, and ATS units from diagrams and schematics * Using hand and power tools to assemble parts * Inspecting and testing finished assemblies * Operating ...

General Shale Brick, Inc

Machine Operator

Elgin, TX · On-site

$16 - $19.25/hr

Machine Operator Elgin, Texas Red River Brick, a leading brand of the General Shale network in the ... Operate Dehacker control panels and perform product and size changeovers * Operate unloading ...

General Shale Brick, Inc

Machine Operator

Elgin, TX · On-site

$16 - $19.25/hr

Machine Operator Elgin, Texas Red River Brick, a leading brand of the General Shale network in the ... Operate Dehacker control panels and perform product and size changeovers * Operate unloading ...

Staffingine LLC

Engineer IV

Houston, TX · On-site

... operating temperature. * Hardware selection of key hardware components * Instrumentation- suitability for the selected parameters; ranges; alarm set points; trip set points * Control panel interfaces ...

MN8 Energy

Control Room Operator 1

Dallas, TX · On-site

The Control Room Operator is responsible for 247 remote operations of MN8 's renewable fleet across ... panel washes, non-conformity correction, etc.) * Provide information and support to dispatched ...

MN8 Energy

Control Room Operator 1

Coppell, TX · On-site

The Control Room Operator is responsible for 24×7 remote operations of MN8 's renewable fleet ... panel washes, non-conformity correction, etc.) * Provide information and support to dispatched ...

Double L Contractors LLC

Pump Operator

Carthage, TX · On-site

Safely rig in and rig out * Start pumps, open valves, and operate control panels * Monitor pressure and temperature gauges from any abnormalities with the transfer of materials * Attach pumps and ...

Red River Brick

Machine Operator

Elgin, TX · On-site

$16 - $19.25/hr

Machine Operator Elgin, Texas Red River Brick, a leading brand of the General Shale network in the ... Operate Dehacker control panels and perform product and size changeovers * Operate unloading ...

Panelmatic

Quality Control Inspector

Houston, TX · On-site

... control panels. Our business has sufficiently grown over the years to support expansion for our ... Keeping measurement equipment operating accurately by following calibration requirements and ...

HDR

Control System EIT/Coordinator

Austin, TX

$79K - $106K/yr

Depending on project size job may require supervision of designer and CAD operators. Projects ... Experience with control panel design and panel wiring. * Candidates hired without their EIT will ...

Panelmatic

Quality Control Inspector

Conroe, TX · On-site

... control panels. Our business has sufficiently grown over the years to support expansion for our ... Keeping measurement equipment operating accurately by following calibration requirements and ...

Panelmatic

Quality Control Inspector

Conroe, TX · On-site

... control panels. Our business has sufficiently grown over the years to support expansion for our ... Keeping measurement equipment operating accurately by following calibration requirements and ...

Panelmatic

Quality Control Inspector

Houston, TX · On-site

... control panels. Our business has sufficiently grown over the years to support expansion for our ... Keeping measurement equipment operating accurately by following calibration requirements and ...

Panelmatic

Quality Control Inspector

Conroe, TX · On-site

... control panels. Our business has sufficiently grown over the years to support expansion for our ... Keeping measurement equipment operating accurately by following calibration requirements and ...

HDR

Control System EIT/Coordinator

Austin, TX · On-site

$79K - $106K/yr

Depending on project size job may require supervision of designer and CAD operators. Projects ... Experience with control panel design and panel wiring. * Candidates hired without their EIT will ...

Apidel Technologies

Production Operator

Houston, TX

$16 - $19.25/hr

The expectationfor Level 1 operator is to deliver quality packaging and products for ourcustomers ... Maintain control panel adjust speed, delays, and other timers if needed. Interface with plant ...

next page

Showing results 1-20

All JobsControl Panel Operator JobsControl Panel Operator Jobs in Texas

Control Panel Operator information

See Texas salary details

$10

$22

$35

How much do control panel operator jobs pay per hour?

As of Jul 12, 2026, the average hourly pay for control panel operator in Texas is $22.95, according to ZipRecruiter salary data. Most workers in this role earn between $18.12 and $25.96 per hour, depending on experience, location, and employer.

What kind of jobs in media bring in $150,000 a year?

Control panel operators typically do not earn $150,000 annually; high salaries in media-related roles often go to executive positions such as media directors, producers, or senior broadcast engineers with extensive experience and specialized skills. These roles may require advanced certifications, leadership abilities, and working in high-pressure environments, often with long or irregular hours.

What is a control room operator's salary?

The salary of a control panel operator typically ranges from $40,000 to $70,000 per year, depending on experience, industry, and location. They often work in environments such as manufacturing plants, power plants, or industrial facilities, and may require certifications or technical skills to operate control systems effectively.

Is a control room operator stressful?

Control panel operators often work in high-responsibility environments where attention to detail and quick decision-making are essential, which can contribute to job stress. The level of stress varies depending on the industry, shift schedules, and workload, but proper training and safety protocols help manage job-related pressure.

What is a control panel operator?

A control panel operator is responsible for monitoring and adjusting machinery and equipment through control panels in industrial or manufacturing settings. They ensure systems run smoothly, respond to alarms, and maintain safety standards, often using specialized tools and following operational procedures.

What are the typical challenges a Control Panel Operator faces during shift changes, and how are they managed?

Control Panel Operators often encounter challenges during shift changes, such as ensuring accurate handover of system status and ongoing issues. Miscommunication can lead to operational errors or missed alarms. To manage this, operators typically follow structured handover protocols, use detailed logbooks, and participate in briefings with incoming team members. Maintaining clear communication and thorough documentation is essential to ensure continuity and safe operations.

What is the difference between Control Panel Operator vs Machine Operator?

AspectControl Panel OperatorMachine Operator
CredentialsHigh school diploma, safety training, sometimes certificationsHigh school diploma, technical training or certifications often preferred
Work EnvironmentControl rooms, industrial plants, power stationsFactories, manufacturing floors, production lines
Job FocusMonitoring and controlling equipment via control panelsOperating machinery directly to produce goods

Control Panel Operators primarily monitor and control equipment through control panels in industrial settings, focusing on system stability. Machine Operators directly handle machinery to manufacture products. While both roles require safety training and technical knowledge, Control Panel Operators emphasize system oversight, whereas Machine Operators focus on physical operation of equipment.

What are the key skills and qualifications needed to thrive as a Control Panel Operator, and why are they important?

To thrive as a Control Panel Operator, you need a solid understanding of process control systems, mechanical aptitude, and a high school diploma or technical certification. Familiarity with SCADA systems, programmable logic controllers (PLCs), and industry-specific safety protocols is typically required. Attention to detail, problem-solving ability, and effective communication are crucial soft skills for monitoring operations and responding to issues. These skills ensure the safe, efficient, and continuous operation of industrial processes, minimizing downtime and maintaining quality standards.

What are Control Panel Operators?

Control Panel Operators are professionals responsible for monitoring and controlling machinery and equipment through control panels in various industries, such as manufacturing, power generation, and processing plants. They ensure that systems run smoothly by observing instrument readings, making necessary adjustments, and responding to alarms or malfunctions. Their role is critical in maintaining operational efficiency, safety, and compliance with regulations. Control Panel Operators often require specialized training and must have a solid understanding of the systems they oversee.
What are popular job titles related to Control Panel Operator jobs in Texas? For Control Panel Operator jobs in Texas, the most frequently searched job titles are:
What job categories do people searching Control Panel Operator jobs in Texas look for? The top searched job categories for Control Panel Operator jobs in Texas are:
What cities in Texas are hiring for Control Panel Operator jobs? Cities in Texas with the most Control Panel Operator job openings:
Control Panel Operator jobs near you
Assembler | 1st Shift

Assembler | 1st Shift

Verstela

Garland, TX

$19/hr

Full-time

Medical, Dental, Vision, Life, Retirement

Re-posted 23 days ago

Job description

Hiring now!
 
Are you an experienced Mechanical Assembler looking for a new longterm opportunity?
 
A manufacturer in Garland builds power distribution equipment used in AI data centers, hospitals, and other critical facilities across the country. They have immediate openings for Mechanical Assemblers on their day shift team.
 
It's a temp-to-hire role — Monday through Friday, consistent hours, with a real path to permanent if you're a good fit. The facility is temperature controlled, clean and new. Pay is $19/hr paid weekly with benefits available.
 
Mechanical Assembly Job Duties
  • Assembling control panels, switchgear, switchboards, and ATS units from diagrams and schematics
  • Use hand and power tools to assemble parts
  • Inspecting and testing finished assemblies
  • Operating hand tools, power tools, and electrical testing equipment — all provided

 Schedule: Monday through Friday, 6:30 AM to 3:00 PM Overtime often available based on production needs

 Pay: $19.00 per hour, paid weekly

 Mechanical Assembly Requirements
  • At least 6 months of assembly or manufacturing experience
  • Able to read diagrams, schematics
  • Control panel, switchboard, or panelboard experience preferred
  • Comfortable standing a full shift and lifting up to 45 lbs
     
Benefits offered by Verstela to temporary employees:
  • Medical
  • Dental
  • Vision
  • Short Term Disability
  • Term Life and AD and D
  • Identity Theft Protection
  • Prescription Plan
  • 401(K) Retirement Savings Plan
     
Location: Garland, TX (This location is not accessible by public transit — personal transportation needed)
 
This Client who we are staffing for participates in the E-Verify program. Learn more at: E-Verify.gov
 
Interested in this Mechanical Assembly role? We're scheduling interviews this week — apply now or call 214-286-5999
 

Apply