ZipRecruiter

Log In

1

Chop Gun Operator Jobs (NOW HIRING)

Valley Iron Inc

Will Call Operator

Oroville, CA · On-site

$24 - $32/hr

The Will Call Operator is responsible for preparing customer orders, stocking materials, and ... Chop saws * Nail guns * Measuring tapes, calipers, and hand tools * Required personal protective ...

Valley Iron Inc

Will Call Operator

Oroville, CA · On-site

$24 - $32/hr

The Will Call Operator is responsible for preparing customer orders, stocking materials, and ... Chop saws * Nail guns * Measuring tapes, calipers, and hand tools * Required personal protective ...

Brookshire Construction

Carpenter

Cuba, MO · On-site

$25/hr

This role involves reading production drawings, operating saws and nail guns, and assembling ... Cut raw lumber and sheathing to precise measurements using radial arm saws, table saws, and chop ...

Mastercraft Boat Company LLC

MC - Laminator

Vonore, TN · On-site

$16.75 - $20/hr

Laying in and rolling of chop/mat, biaxial, woven and foam into decks, hulls and liners. Apply ... Uses resin gun to wet out part. * Air rolls part using air roller to remove air bubbles from part.

Smart Inc

Cabinet Maker

Orlando, FL

$18 - $22/hr

... and operating a table saws chop saws, band saws, routers, and jointers. Must have their own hand tools (tape measure, pencil, hammer, framing square, level, screw gun) Job Responsibilities

Smart Inc

Cabinet Maker

Orlando, FL · On-site

$18 - $22/hr

... and operating a table saws chop saws, band saws, routers, and jointers. Must have their own hand tools (tape measure, pencil, hammer, framing square, level, screw gun) Job Responsibilities

Bridgewood Cabinetry

Production Associate

Chanute, KS

$16 - $19/hr

Chop Saw Machining * Face Frame Sanding * Build Drawer * Finish / Paint * Quality * Shipping ... Operating pneumatic tools such as a sander, drill, nail gun, etc. * Reviewing customer orders and ...

Bridgewood Cabinetry

Production Associate

Chanute, KS · On-site

$12.75 - $16/hr

Departments * Rough Mill Saw & Chop Saw Machining * Face Frame Sanding * Build Drawer * Finish ... Operating pneumatic tools such as a sander, drill, nail gun, etc. * Reviewing customer orders and ...

NOVAE LLC

Outside Shipping Loader

Clarinda, IA · On-site

$15.25 - $17.75/hr

... operated. * Locate the correct trailer needed and use tractor to move it to the appropriate ... Must be able to use hand tools such as chop saw and nail gun. www.novae.com Novae LLC provides ...

Novae Corp

Outside Shipping Loader

Clarinda, IA · On-site

$15.25 - $17.75/hr

... operated. * Locate the correct trailer needed and use tractor to move it to the appropriate ... Must be able to use hand tools such as chop saw and nail gun. www.novae.com Novae LLC provides ...

Clayton Homes

Wall Builder 1

Tooele, UT · On-site

Chop Saw Operator: 1. Can accurately read and use a tape measure down to the 16th of an inch. 2. Can safely operate a nail gun. Understands its safety features and knows how to appropriately use ...

Clayton Homes

Wall Builder 1

Tooele, UT · On-site

Chop Saw Operator: 1. Can accurately read and use a tape measure down to the 16th of an inch. 2. Can safely operate a nail gun. Understands its safety features and knows how to appropriately use ...

Woodgrain, Inc.

Assembler- Taunton, MA

Taunton, MA · On-site

$18.50 - $22.50/hr

Operating machinery that modifies the product (ex. chop saws) Preparing the product for shipment by ... Include but are not limited to chop saw, table saw, rip saw, hand saw; router, nail gun, screw gun ...

Woodgrain, Inc.

Production- Latrobe, PA

Greensburg, PA · On-site

$15.75 - $19.75/hr

Operating machinery that modifies the product (ex. chop saws) Preparing the product for shipment by ... Include but are not limited to chop saw, table saw, rip saw, hand saw; router, nail gun, screw gun ...

previous pagenext page

Showing results 21-40

All JobsChop Gun Operator Jobs

Chop Gun Operator information

See salary details

$11

$18

$22

How much do chop gun operator jobs pay per hour?

As of Aug 9, 2026, the average hourly pay for chop gun operator in the United States is $18.12, according to ZipRecruiter salary data. Most workers in this role earn between $16.11 and $19.71 per hour, depending on experience, location, and employer.

What are the most common challenges faced by a chop gun operator, and how can they be addressed?

Chop Gun Operators often face challenges such as maintaining consistent material flow, ensuring accurate fiber distribution, and minimizing equipment downtime. Working in environments with fiberglass and resins can also pose safety and cleanliness issues, so adherence to proper protective gear and regular equipment maintenance is crucial. Developing strong attention to detail and communication skills helps operators collaborate effectively with production teams and troubleshoot issues quickly, leading to better product quality and smoother workflow.

What does a chop gun operator do?

A Chop Gun Operator is responsible for operating a chop gun, a tool that sprays resin and chopped fiberglass strands onto molds to create reinforced fiberglass products. They prepare the equipment, load raw materials, and ensure even application for consistent product quality. Chop Gun Operators must also monitor safety protocols, maintain their equipment, and may perform minor repairs or adjustments as needed. This position is commonly found in industries such as boat building, automotive, and construction, where fiberglass components are manufactured.

What are the key skills and qualifications needed to thrive as a chop gun operator, and why are they important?

To thrive as a Chop Gun Operator, you need a solid understanding of composite materials, mechanical aptitude, and typically a high school diploma or equivalent. Familiarity with chop gun machinery, resin systems, and safety certifications such as OSHA training are commonly required. Attention to detail, manual dexterity, and the ability to follow precise instructions are critical soft skills that help ensure quality and safety. These skills are essential for producing consistent composite products, maintaining workplace safety, and minimizing costly errors in a manufacturing environment.

What is the difference between Chop Gun Operator vs Spray Painter?

AspectChop Gun OperatorSpray Painter
CredentialsTypically requires safety training and certification in spray equipmentRequires painting certifications and sometimes a license
Work EnvironmentFactories, manufacturing plants, automotive shopsAuto body shops, industrial painting facilities
Industry UsageUsed in composite manufacturing, automotive, and constructionUsed in automotive, aerospace, and industrial coating
Job FocusApplying fiberglass or composite materials with a chop gunApplying paint or coatings to surfaces

While both roles involve spray equipment, a Chop Gun Operator primarily applies fiberglass or composite materials using a chop gun, whereas a Spray Painter focuses on applying paint or coatings. Both require safety training and are common in manufacturing and automotive industries, but their specific tasks and materials differ.

What cities are hiring for Chop Gun Operator jobs? Cities with the most Chop Gun Operator job openings:
What states have the most Chop Gun Operator jobs? States with the most job openings for Chop Gun Operator jobs include:
What job categories do people searching Chop Gun Operator jobs look for? The top searched job categories for Chop Gun Operator jobs are:
Chop Gun Operator jobs near you

Will Call Operator

Valley Iron Inc

Oroville, CA • On-site

$24 - $32/hr

Other

Medical, Dental, Vision, Life, Retirement

Re-posted 14 days ago

Job description

Description

Pay: $24.00 - $32.00 per hour

Job description:

Description: Pay: $24.00 - $32.00 per hour

company Overview

Valley Iron is a family-owned company rooted in Integrity, Accountability, Loyalty, and Respect. We're committed to building strong teams that grow with us, and now we're looking for a Will Call to lead day-to-day operations at our Oroville facility.

Job Description

The Will Call Operator is responsible for preparing customer orders, stocking materials, and loading delivery trucks while maintaining high standards of safety, efficiency, and customer service. This position involves frequent interaction with customers, operation of warehouse equipment, and handling a variety of steel, stainless steel, and aluminum products in a fast-paced industrial environment.

*
Essential Duties and Responsibilities*

  • Fill orders submitted by the sales team and walk-in customers accurately and safely.
  • Pull stock materials as needed to complete customer and delivery orders.
  • Prepare and process call-in orders in a timely manner.
  • Assist customers picking up materials by wrapping, staging, and filing orders.
  • Rotate between assigned tasks and job functions as needed throughout the workday.
  • Operate equipment such as forklifts, overhead cranes, propane torches, and chop saws to handle and cut materials.
  • Load and unload steel, stainless steel, and aluminum products from customer and company vehicles.
  • Maintain clear communication with customers, sales staff, and supervisors.
  • Provide professional and assertive customer service at all times.
  • Perform general yard maintenance and equipment clean-up duties as assigned.
  • Follow all workplace safety procedures and company policies.
  • Complete additional duties and responsibilities as assigned.

Requirements:

*
Experience*

  • Minimum of 2 years of forklift and/or overhead crane operating experience preferred.

Requirements

 Required Skills and Abilities

  • Strong attention to detail.
  • Ability to read and understand measurements accurately.
  • Willingness to learn and adapt to changing priorities.
  • Excellent communication and organizational skills.
  • Knowledge of carbon steel, stainless steel, and aluminum products preferred.
  • Experience using chop saws and propane torches.
  • Ability to work effectively in a fast-paced environment with changing daily demands.
  • Dependable attendance and punctuality.
  • Ability to work independently as well as part of a team.

Physical Requirements & Working Conditions Working Environment

  • Work is primarily performed outdoors and may involve exposure to heat, cold, rain, wind, and other weather conditions.
  • Exposure to paint fumes, carbon dust, torch fumes, and varying noise levels may occur.
  • Fast-paced environment with frequent schedule and priority changes.
  • Occasional lifting of up to 50 pounds required.

Equipment Used

  • Forklifts and Hubtex forklifts
  • Overhead cranes
  • Propane torches
  • Chop saws
  • Nail guns
  • Measuring tapes, calipers, and hand tools
  • Required personal protective equipment (PPE)

Physical Demands

  • Frequent standing, walking, bending, twisting, climbing, and lifting.
  • Use of hands for pulling, stacking, and unloading materials.
  • Ability to climb on and off forklifts and ladders throughout the workday.

* Why Join Valley Iron?*At Valley Iron, you're more than just an employee. We offer a work environment built on trust, stability, and growth. If you want to be part of a team that delivers excellence every day and values the work you do, we want to meet you!Job Type: Full-time Benefits:

  • 401(k)
  • 401(k) 4% Match
  • Dental insurance
  • Flexible spending account
  • Health insurance
  • Life insurance
  • Opportunities for advancement
  • Vision insurance

Work Location: In person Job Type: Full-time 

Apply