ZipRecruiter

Log In

1

Cdma Jobs (NOW HIRING)

DYNIS

RF Engineer

Columbia, MD · On-site

Nortel/Nokia GSM/TDMA/CDMA/UMTS Wireless Network Optimization Certification a plus EDUCATION AND/OR EXPERIENCE Minimum of five (5) years of RF experience Bachelors Degree in Electrical and ...

Paradigminfotech

Android developer

Warren, NJ · On-site

$58 - $76/hr

... CDMA, LTE, WiFi, Bluetooth, NFC, WiFi direct, Location services, Battery and Data usage APIs etc. Experience in handling device features such as Location, camera, accelerometer, gyroscope etc.

Paradigminfotech

Android Developer

Warren, NJ · On-site

$58 - $76/hr

... CDMA, LTE, WiFi, Bluetooth, NFC, WiFi direct, Location services, Battery and Data usage APIs etc. Experience in handling device features such as Location, camera, accelerometer, gyroscope etc.

KBR

Senior Systems Engineer

San Diego, CA · On-site

$125/hr

... CDMA Develop and review link budgets, spectral efficiency analysis, and interference mitigation strategies Support System-on-Chip (SoC) or FPGA-based modem implementations and hardware/software ...

KBR

Senior Systems Engineer

Newport, RI · On-site

$125/hr

... CDMA Develop and review link budgets, spectral efficiency analysis, and interference mitigation strategies Support System-on-Chip (SoC) or FPGA-based modem implementations and hardware/software ...

SGS

Part Time Wireless Test Engineer

San Diego, CA · On-site

$28/hr

SUMMARY Test Engineer to perform Radio Frequency (RF) Over the Air (OTA) Antenna testing on mobile products with technologies such as CDMA, GSM, UMTS, LTE, Wi-Fi, IOT, and 5G, to ensure delivery of ...

KBR, Inc.

Senior Systems Engineer

Newport, RI · On-site

$125/hr

... CDMA • Develop and review link budgets, spectral efficiency analysis, and interference mitigation strategies • Support System-on-Chip (SoC) or FPGA-based modem implementations and hardware ...

CED Systems

DAS Field Technician

Dallas, TX · On-site

$19.50 - $26.75/hr

CDMA, EVDO, GSM, W-CDMA, LTE and Wi-Fi) * Strong working knowledge of RF test equipment (e.g. Spectrum Analyzer, JDSU, Anritsu, Solutelia, etc.) * Strong working knowledge of structured cabling (e.g.

SGS

Jr. Wireless Test Engineer

San Diego, CA · On-site

$28/hr

SUMMARY Test Engineer to perform Radio Frequency (RF) Over the Air (OTA) Antenna testing on mobile products with technologies such as CDMA, GSM, UMTS, LTE, Wi-Fi, IOT, and 5G, to ensure delivery of ...

next page

Showing results 1-20

People also search for

All JobsCdma Jobs

Cdma information

See salary details

$18

$35

$68

How much do cdma jobs pay per hour?

As of Jun 7, 2026, the average hourly pay for cdma in the United States is $35.63, according to ZipRecruiter salary data. Most workers in this role earn between $23.56 and $55.53 per hour, depending on experience, location, and employer.

How does a CDMA engineer typically collaborate with cross-functional teams during network optimization projects?

As a CDMA engineer, you will regularly collaborate with cross-functional teams such as RF engineers, network operations, and software developers during network optimization projects. This involves sharing performance data, coordinating testing efforts, and troubleshooting issues together to enhance coverage and capacity. Frequent communication and joint problem-solving are key, as the role often requires balancing technical requirements with business objectives. This collaborative environment not only sharpens technical expertise but also builds strong teamwork and project management skills essential for career growth.

What are the key skills and qualifications needed to thrive as a CDMA (Clinical Data Management Associate), and why are they important?

To thrive as a Clinical Data Management Associate, you need a solid understanding of clinical research processes, data management principles, and a relevant life sciences degree. Familiarity with clinical data management systems (CDMS), electronic data capture (EDC) tools like Medidata Rave, and certifications such as CDM (Certified Data Manager) are often required. Attention to detail, strong organizational skills, and effective communication help ensure accurate data handling and collaboration with clinical teams. These skills are vital for maintaining data quality, regulatory compliance, and the integrity of clinical trial results.

What is the difference between Cdma vs Network Technician?

AspectCdmaNetwork Technician
Required CertificationsTelecom certifications, technical trainingNetworking certifications (e.g., CompTIA Network+)
Work EnvironmentCell towers, telecom facilities, fieldworkData centers, server rooms, network infrastructure sites
Industry UsageTelecommunications companies, wireless providersIT service providers, telecom companies, enterprise networks

Cdma technicians focus on maintaining and repairing CDMA wireless networks, working primarily in telecom environments. Network Technicians handle broader network infrastructure, including wired and wireless systems, often in IT or enterprise settings. While both roles require technical skills and certifications, Cdma specialists are more telecom-specific, whereas Network Technicians have a wider scope across networking technologies.

What are CDMA jobs?

CDMA jobs typically refer to positions that involve working with Code Division Multiple Access (CDMA) technology, which is a type of cellular communication protocol widely used in mobile networks. Professionals in CDMA jobs may be responsible for network planning, optimization, troubleshooting, and maintenance of CDMA wireless systems. These roles often require a background in telecommunications engineering, network operations, or radio frequency (RF) engineering. CDMA jobs are common with mobile carriers, telecom equipment vendors, and service providers that operate or support CDMA-based networks.
More about Cdma jobs
What states have the most Cdma jobs? States with the most job openings for Cdma jobs include:
What job categories do people searching Cdma jobs look for? The top searched job categories for Cdma jobs are:
Cdma jobs near you
Infographic showing various Cdma job openings in the United States as of May 2026, with employment types broken down into 2% Internship, 87% Full Time, and 11% Contract. Highlights an 90% Physical, 2% Hybrid, and 8% Remote job distribution, with an average salary of $74,115 per year, or $35.6 per hour.
Structured Cabling Network Engineer

Structured Cabling Network Engineer

Beyond SOF

Richmond, VA • On-site

$50/hr

Other

Posted 20 days ago

Job description

Role : Structured Cabling Network Engineer
Location: Richmond, VA (Onsite) Need candidate within 2hrs drivable distance
Rate: $50/hr C2C
Interview Mode: Both Web Cam and In Person Interview
Need resume by July 24
**Local Richmond, VA candidates required due to onsite requirement
**Candidates must possess a clean driving record (this will be verified) as their job involves field work within the state of VA, driving either a leased or a state vehicle
**Candidates must maintain insurance coverage during this engagement (this will be verified)
**Candidate must be able to pay for room/board while travelling - to be reimbursed by VDOT. Gas card provided for gas only
**Travel may include some overnights, with notice
**ONSITE interviews strongly preferred
The client is seeking an IT professional to provide network services;
* Troubleshooting
* Monitoring
* Engineering
* Cabling (Data/Voice)
* Evaluating performance
* Optimizing system performance
for the Information Technology department. Which at times, may require statewide travel with an occasional overnight stay to perform work.
The selected candidate will design, direct, review, implement, improve, engineer, and cable (network/voice)

The selected candidate will work with vendors to develop and implement solutions, develop policies and guidelines, troubleshoot major/minor network failures, analyze network capacity, manage vendor relationships, support agreements, and validate network billing related to all aspects of the network based on Network and Telecommunications standards and best practices.
Experience in network engineering to include analysis of network requirements, performance for a large-scale network. Experience in data and telecommunications to include installing, testing, and inspecting deployed data communications systems. Experience installing, migrating, and supporting critical, multi-site networks a plus.
The selected candidate will coordinate and interact with multiple vendors for problem resolution and diagnosing networking issues

Knowledge of wireline and wireless communications technologies and standards, including fiber optics, T1, DS-3, MPLS, cellular / 5G, CDMA, TDMA, VoIP, TCP/IP, UDP, ICMP, IP networking concepts (subnetting, routing).
The selected candidate will manage all phases of network installation and administration; to research and document communications technologies, topologies, and trends. The selected candidate should be able to communicate effectively verbally and in writing with internal and external customers. Proficiency using MS Teams, Word, Excel, and PowerPoint

With an excellent working knowledge of LAN, WAN, WAP, Cradle Point / NetCloud, and cabling standards.SkillRequired / DesiredAmountExperienceExperience in data and telecommunications to include installing, testing and inspecting deployed communications systems.Required5YearsExperience in Installation, maintain and support of critical, multi-site networks.Required5YearsKnowledge of wire-line and wireless, including fiber optics, T1, DS-3, MPLS, cellular technologies, CDMA, TDMA, VoIP, 5G, TCP/IP, UDP,ICMP,IP NetworksRequired5YearsWorking knowledge of networking tools, such as; Fluke Versiv with light meter, netAlly AirCheck G3, netAlly nXG, iperf3, nmap, wireshark, traceroute,Highly desired2YearsIntermediate skills in using Microsoft Office products, Outlook, Word, Excel and Visio.Highly desired1YearsExperience testing copper and fiberRequired1Years

Apply