ZipRecruiter

Log In

1

Calibration Engineer Jobs in Ohio (NOW HIRING)

MSI Viking

Calibration Technician

Fairfield, OH

$20.75 - $28.25/hr

Perform accredited calibrations on a wide variety of electronic, torque, pressure, and dimensional measuring test equipment. A2LA accredited. Duties/Responsibilities: Set up and perform manual ...

Chenega Mios

Calibration Technician

Dayton, OH · On-site

$20.75 - $28.25/hr

The Calibration Technician shall provide services supporting the Air Force Research Laboratory at Wright-Patterson AFB (WPAFB). Duties and Responsibilities: • Ensure periodic calibration of Test ...

Transcat, Inc.

Calibration Technician II

Cincinnati, OH

$20.73 - $31.09/hr

Calibration Technician II is a mid-level position, for which at least three (3) years of commercial calibration experience is preferred. Calibration Technicians at this level typically can calibrate ...

Transcat, Inc.

Calibration Technician I

Mentor, OH · On-site

$19.75 - $26.75/hr

Calibration Technician I is an entry-level position that requires either education in the electronics/calibration field or at least one (1) year of calibration experience. Calibration Technicians at ...

Transcat, Inc.

Calibration Technician I

Mentor, OH

$19.75 - $26.75/hr

Calibration Technician I is an entry-level position that requires either education in the electronics/calibration field or at least one (1) year of calibration experience. Calibration Technicians at ...

Simco Electronics

Calibration Technician B

Springboro, OH · On-site

$25 - $32/hr

Position Overview The Calibration Technician B will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the ...

Transcat, Inc.

Calibration Technician I

Mentor, OH

$21 - $31.50/hr

Calibration Technician I is an entry-level position that requires either education in the electronics/calibration field or at least one (1) year of calibration experience. Calibration Technicians at ...

Transcat, Inc.

Calibration Technician II

Cincinnati, OH

$21 - $28.75/hr

Calibration Technician II is a mid-level position, for which at least three (3) years of commercial calibration experience is preferred. Calibration Technicians at this level typically can calibrate ...

Transcat, Inc.

Calibration Technician I

Mentor, OH

$19.75 - $26.75/hr

Calibration Technician I is an entry-level position that requires either education in the electronics/calibration field or at least one (1) year of calibration experience. Calibration Technicians at ...

Transcat, Inc.

Calibration Technician II

Cincinnati, OH

$21 - $28.75/hr

Calibration Technician II is a mid-level position, for which at least three (3) years of commercial calibration experience is preferred. Calibration Technicians at this level typically can calibrate ...

Transcat, Inc.

Calibration Technician II

Cincinnati, OH · On-site

$21 - $28.75/hr

Calibration Technician II is a mid-level position, for which at least three (3) years of commercial calibration experience is preferred. Calibration Technicians at this level typically can calibrate ...

Simco Electronics

Calibration Technician B

Springboro, OH · On-site

$25 - $32/hr

Position Overview The Calibration Technician B will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the ...

Diedre Moire Corp.

Calibration Technician

Kettering, OH · On-site

$90K - $140K/yr

Metrology Tech - Lab Instrumentation - Kettering, OH Metrologist Calibration Technician Laboratory Equipment Maintenance Tech GCMS LCMS HPLC Chromatographs Chromatography Spectrometry Validation

Concept Machine

Calibration Lab Technician

Westlake, OH · On-site

$20.25 - $27.75/hr

A Calibration Lab Technician will routinely test equipment and instruments to check that their readings and output meet expected results. CORE RESPONSIBILITIES Perform calibration, adjustment, and ...

Fox Valley Metrology

Be Seen First

Traveling Electronics Calibration Technician

Mansfield, OH · On-site

$27 - $33/hr

Electronics Calibration Technician Fox Valley Metrology, a leader in ISO/IEC 17025 accredited calibration, serves diverse industries such as Defense, Aerospace, Medical, Semiconductor, and Fortune ...

next page

Showing results 1-20

All JobsCalibration Engineer JobsCalibration Engineer Jobs in Ohio

Calibration Engineer information

See Ohio salary details

$23

$39

$48

How much do calibration engineer jobs pay per hour?

As of Jul 19, 2026, the average hourly pay for calibration engineer in Ohio is $39.81, according to ZipRecruiter salary data. Most workers in this role earn between $33.61 and $42.50 per hour, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as a Calibration Engineer, and why are they important?

To thrive as a Calibration Engineer, you need a solid background in engineering, mathematics, and physics, usually supported by a degree in a relevant field such as electrical or mechanical engineering. Familiarity with calibration standards, metrology equipment, and data analysis software like LabVIEW or MATLAB is typically required, along with certifications such as ISO/IEC 17025. Strong attention to detail, problem-solving skills, and effective communication are crucial soft skills in this role. These competencies ensure precise measurements, regulatory compliance, and reliable system performance in highly technical environments.

What is the difference between Calibration Engineer vs Test Engineer?

AspectCalibration EngineerTest Engineer
Required CredentialsBachelor's in Engineering, certifications in calibration or metrologyBachelor's in Engineering, certifications in testing or quality assurance
Work EnvironmentLaboratories, manufacturing plants, calibration labsTesting facilities, R&D labs, production lines
Industry UsageManufacturing, aerospace, automotive, electronicsElectronics, software, automotive, aerospace

Calibration Engineers focus on maintaining measurement accuracy by calibrating instruments and equipment, ensuring compliance with standards. Test Engineers design and execute tests to verify product performance and quality. While both roles require technical expertise and work in related environments, Calibration Engineers specialize in calibration processes, whereas Test Engineers focus on testing procedures and validation.

What Is a Calibration Engineer?

A calibration engineer specializes in making fine-tune adjustments to various machine components using diagnostic software. The qualifications for a career as a calibration engineer are a bachelor’s degree in mechanical engineering and a Professional Engineer license. You need to pass the Fundamentals of Engineering (FE) exam to earn your initial license, then get relicensed every few years. As a calibration engineer, you need technical knowledge of the machines you service and excellent analytic problem-solving skills to carry out your duties. Your job may focus on diesel fuel engine development, chassis dynamometer testing, or vehicle engine development. You need experience with ETAS - INCA software tools to perform your job. You can find calibration engineers in a variety of industries, but they primarily work for automotive manufacturers.

How much do calibration engineers make in the US?

Calibration engineers in the US typically earn a median annual salary of around $70,000 to $90,000, with experienced professionals and those in specialized industries earning higher. Salaries can vary based on experience, location, certifications, and the complexity of calibration tasks performed.

What engineers make $300,000 a year?

Senior engineers in specialized fields such as petroleum, aerospace, or software engineering can earn $300,000 or more annually, especially with extensive experience, advanced skills, and leadership roles. High-level positions often require advanced certifications, management responsibilities, or working in high-demand industries.

What is the work of a calibration engineer?

A calibration engineer is responsible for ensuring that measurement instruments and equipment are accurate and meet specified standards. They perform calibration procedures, maintain calibration records, and use tools like calibration software and standards to verify device precision, often working in manufacturing, aerospace, or laboratory environments. Certification and technical knowledge of measurement principles are typically required for this role.

What are some typical challenges Calibration Engineers face when ensuring equipment accuracy across multiple departments?

Calibration Engineers often encounter challenges such as managing tight schedules to minimize equipment downtime, coordinating with various departments to access instruments, and ensuring compliance with strict industry standards. They must frequently adapt to different types of equipment and documentation systems, as well as troubleshoot unexpected calibration issues on the spot. Strong communication and organizational skills are essential for collaborating with production, quality assurance, and maintenance teams to maintain seamless operations.

What engineers make $500,000?

Senior engineers in specialized fields such as petroleum, aerospace, or software engineering can earn $500,000 or more annually, often through a combination of base salary, bonuses, and stock options. Achieving this level typically requires extensive experience, advanced skills, and sometimes leadership roles or working in high-demand industries.

What are Calibration Engineers?

Calibration Engineers are professionals who specialize in testing, adjusting, and maintaining instruments and equipment to ensure they provide accurate measurements. They work in various industries, including manufacturing, aerospace, healthcare, and automotive, where precise measurements are critical for quality and safety. Their responsibilities often include developing calibration procedures, documenting results, troubleshooting equipment issues, and ensuring compliance with industry standards. Calibration Engineers play a vital role in maintaining the reliability and accuracy of instruments used in production and research.
More about Calibration Engineer jobs
What are popular job titles related to Calibration Engineer jobs in Ohio? For Calibration Engineer jobs in Ohio, the most frequently searched job titles are:
What job categories do people searching Calibration Engineer jobs in Ohio look for? The top searched job categories for Calibration Engineer jobs in Ohio are:
What are popular job titles related to Calibration Engineer jobs in OH? For Calibration Engineer jobs in OH, the most frequently searched job titles are:
Calibration Engineer jobs near you
Calibration Technician

Calibration Technician

MSI Viking

Fairfield, OH

$20.75 - $28.25/hr

Full-time

Medical, Dental, Life, Retirement, PTO

Re-posted 5 days ago

Job description

MSI Viking is a leading supplier of precision measuring technologies, offering a wide range of metrology products and services. Our focus is on understanding the needs of our customers and providing customized solutions.

Job Summary:

Perform accredited calibrations on a wide variety of electronic, torque, pressure, and dimensional measuring test equipment. A2LA accredited.

Duties/Responsibilities:

Set up and perform manual/automatic calibration and testing process for a wide range of, dimensional, torque, pressure, and/or electronic gages.

Requirements

  • Update gage tracking software
  • Calculate statistical information regarding uncertainties in calibration using established process
  • Generate certifications with gage calibration results
  • Interact with internal and external customers to answer questions and calibration related information
  • General familiarity with ISO9001 and ISO/IEC17025 Quality Systems
  • Mechanically inclined
  • Good written and oral communication skills as well as computer skills
  • Strong interpersonal skills, ability to work on a team
  • Self-starter, proactive, productive, punctual
  • Eager to learn
  • Willing to travel to local and regional on-site locations daily (overnight as needed)
  • Willing to work overtime and weekends as needed
  • 25% travel including some overnights

Preferred Skills/Abilities:

  • Minimum two years related experience
  • Precision Measurement Equipment Laboratory (PMEL) training
  • Manufacturing Dimensional Calibrations

Education and Experience:

  • High school diploma or equivalent
  • At least two years' related experience preferred
  • Precision Measurement Equipment Laboratory (PMEL) training (preferred)
  • Manufacturing Dimensional Calibrations

Physical Requirements:

  • Must be able to lift up to 50 pounds
  • Prolonged standing required
  • Bending, kneeling, walking required

Benefits

  • Competitive pay based on skills and qualifications
  • Opportunity to earn up to a $550 monthly bonus based on productivity and quality
  • Paid travel time, including overtime
  • Medical, dental, disability, and life insurance
  • 401k with Company match
  • Paid vacation and company holidays
  • Continuing Education Opportunities

Apply