ZipRecruiter

Log In

1

Calibration Engineer Jobs in Minnesota (NOW HIRING)

Talent Solutions

Calibration Technician

Stacy, MN

$23 - $33/hr

Read engineering drawings, technical specifications, and calibration procedures. * Develop and improve calibration procedures where appropriate. * Work collaboratively with fellow technicians to ...

Medtronic

Calibration/Metrology Technician III

Moundsview, MN · On-site

$23.25 - $31.75/hr

Interact with equipment owning engineers and technicians to schedule calibration activities, provide guidance related to selection of test and measurement equipment, and lead others in following ...

Northrop Grumman Corporation

$57K - $95K/yr

The candidate must possess the ability to interact with Engineers within the organization, for any ... Being both organized and Computer literate is necessary as all Calibration Failure Notices (CFN ...

ITW MTS Systems

Calibration Technician

Eden Prairie, MN

$24 - $37/hr

Perform calibration of M&TE using approved procedures while ensuring compliance with calibration requirements and traceability. * Create and execute calibration procedures by applying knowledge of ...

Burke Porter Group

Calibration Coordinator

Ham Lake, MN · On-site

$34/hr

Partner with Engineering, Manufacturing, Quality, Validation, and Regulatory Affairs teams. * Support equipment qualification (IQ/OQ/PQ) and lifecycle management. * Provide calibration input into ...

next page

Showing results 1-20

All JobsCalibration Engineer JobsCalibration Engineer Jobs in Minnesota

Calibration Engineer information

See Minnesota salary details

$24

$41

$50

How much do calibration engineer jobs pay per hour?

As of Jul 26, 2026, the average hourly pay for calibration engineer in Minnesota is $41.01, according to ZipRecruiter salary data. Most workers in this role earn between $34.62 and $43.80 per hour, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as a Calibration Engineer, and why are they important?

To thrive as a Calibration Engineer, you need a solid background in engineering, mathematics, and physics, usually supported by a degree in a relevant field such as electrical or mechanical engineering. Familiarity with calibration standards, metrology equipment, and data analysis software like LabVIEW or MATLAB is typically required, along with certifications such as ISO/IEC 17025. Strong attention to detail, problem-solving skills, and effective communication are crucial soft skills in this role. These competencies ensure precise measurements, regulatory compliance, and reliable system performance in highly technical environments.

What is the difference between Calibration Engineer vs Test Engineer?

AspectCalibration EngineerTest Engineer
Required CredentialsBachelor's in Engineering, certifications in calibration or metrologyBachelor's in Engineering, certifications in testing or quality assurance
Work EnvironmentLaboratories, manufacturing plants, calibration labsTesting facilities, R&D labs, production lines
Industry UsageManufacturing, aerospace, automotive, electronicsElectronics, software, automotive, aerospace

Calibration Engineers focus on maintaining measurement accuracy by calibrating instruments and equipment, ensuring compliance with standards. Test Engineers design and execute tests to verify product performance and quality. While both roles require technical expertise and work in related environments, Calibration Engineers specialize in calibration processes, whereas Test Engineers focus on testing procedures and validation.

What Is a Calibration Engineer?

A calibration engineer specializes in making fine-tune adjustments to various machine components using diagnostic software. The qualifications for a career as a calibration engineer are a bachelor’s degree in mechanical engineering and a Professional Engineer license. You need to pass the Fundamentals of Engineering (FE) exam to earn your initial license, then get relicensed every few years. As a calibration engineer, you need technical knowledge of the machines you service and excellent analytic problem-solving skills to carry out your duties. Your job may focus on diesel fuel engine development, chassis dynamometer testing, or vehicle engine development. You need experience with ETAS - INCA software tools to perform your job. You can find calibration engineers in a variety of industries, but they primarily work for automotive manufacturers.

How much do calibration engineers make in the US?

Calibration engineers in the US typically earn a median annual salary of around $70,000 to $90,000, with experienced professionals and those in specialized industries earning higher. Salaries can vary based on experience, location, certifications, and the complexity of calibration tasks performed.

What engineers make $300,000 a year?

Senior engineers in specialized fields such as petroleum, aerospace, or software engineering can earn $300,000 or more annually, especially with extensive experience, advanced skills, and leadership roles. High-level positions often require advanced certifications, management responsibilities, or working in high-demand industries.

What is the work of a calibration engineer?

A calibration engineer is responsible for ensuring that measurement instruments and equipment are accurate and meet specified standards. They perform calibration procedures, maintain calibration records, and use tools like calibration software and standards to verify device precision, often working in manufacturing, aerospace, or laboratory environments. Certification and technical knowledge of measurement principles are typically required for this role.

What are some typical challenges Calibration Engineers face when ensuring equipment accuracy across multiple departments?

Calibration Engineers often encounter challenges such as managing tight schedules to minimize equipment downtime, coordinating with various departments to access instruments, and ensuring compliance with strict industry standards. They must frequently adapt to different types of equipment and documentation systems, as well as troubleshoot unexpected calibration issues on the spot. Strong communication and organizational skills are essential for collaborating with production, quality assurance, and maintenance teams to maintain seamless operations.

What engineers make $500,000?

Senior engineers in specialized fields such as petroleum, aerospace, or software engineering can earn $500,000 or more annually, often through a combination of base salary, bonuses, and stock options. Achieving this level typically requires extensive experience, advanced skills, and sometimes leadership roles or working in high-demand industries.

What are Calibration Engineers?

Calibration Engineers are professionals who specialize in testing, adjusting, and maintaining instruments and equipment to ensure they provide accurate measurements. They work in various industries, including manufacturing, aerospace, healthcare, and automotive, where precise measurements are critical for quality and safety. Their responsibilities often include developing calibration procedures, documenting results, troubleshooting equipment issues, and ensuring compliance with industry standards. Calibration Engineers play a vital role in maintaining the reliability and accuracy of instruments used in production and research.
More about Calibration Engineer jobs
What are popular job titles related to Calibration Engineer jobs in Minnesota? For Calibration Engineer jobs in Minnesota, the most frequently searched job titles are:
What job categories do people searching Calibration Engineer jobs in Minnesota look for? The top searched job categories for Calibration Engineer jobs in Minnesota are:
What are popular job titles related to Calibration Engineer jobs in MN? For Calibration Engineer jobs in MN, the most frequently searched job titles are:
Calibration Engineer jobs near you
Infographic showing various Calibration Engineer job openings in Minnesota as of July 2026, with employment types broken down into 1% As Needed, 85% Full Time, 8% Part Time, 5% Contract, and 1% Nights. Highlights an 96% Physical, 1% Hybrid, and 3% Remote job distribution, with an average salary of $85,306 per year, or $41 per hour.
Calibration Technician

Calibration Technician

Talent Solutions

Stacy, MN

$23 - $33/hr

Full-time

Medical, Dental, Vision, Retirement, PTO

Posted 11 days ago

Job description

Calibration Technician



Multiple U.S. Locations

Pay: $23.00–$33.00/hour (Based on experience and calibration specialty)

Locations Available:

  • Boise, ID
  • Rockford, IL
  • Stacy, MN
  • Fenton, MO
  • Monroe, NC
  • Crestline, OH
  • Broken Arrow, OK
  • Franklin, TN


About Fox Valley Metrology

Fox Valley Metrology is one of the nation's largest ISO/IEC 17025 accredited calibration laboratories, providing precision calibration, repair, and measurement services to manufacturers across industries including aerospace, defense, medical device, automotive, semiconductor, electronics, food processing, and Fortune 500 manufacturing.


As a trusted partner to thousands of organizations nationwide, we help ensure the accuracy and reliability of the precision measurement equipment our customers depend on every day. Our people are the foundation of our success, and we invest heavily in training, career development, and opportunities for long-term growth.


The Opportunity

Fox Valley Metrology is seeking mechanically and technically inclined individuals to join our growing team of Calibration Technicians.

Whether you have previous calibration experience or come from manufacturing, automotive repair, industrial maintenance, machining, military, quality control, electronics, HVAC, or another hands-on technical field, we want to hear from you.

We provide specialized training and place technicians in the calibration discipline that best matches their experience and strengths. Opportunities include:

  • Mechanical Calibration
  • Electronics Calibration
  • Hand Tool Calibration
  • Hard Gage Calibration
  • Dimensional Inspection


Compensation is based on experience, technical background, and assigned calibration specialty, with opportunities for advancement as your skills and certifications grow.


What You'll Do

  • Calibrate, inspect, troubleshoot, and verify precision measuring and testing equipment.
  • Perform calibration on a variety of mechanical, electronic, dimensional, and hand measurement instruments.
  • Test, diagnose, and repair equipment to ensure accurate and reliable measurements.
  • Follow established calibration procedures and ISO/IEC 17025 quality standards.
  • Document calibration results and maintain accurate service records.
  • Read engineering drawings, technical specifications, and calibration procedures.
  • Develop and improve calibration procedures where appropriate.
  • Work collaboratively with fellow technicians to complete projects safely, efficiently, and accurately.
  • Provide exceptional customer service while maintaining the highest standards of quality.
  • Depending on the position, provide on-site calibration support to customer facilities with occasional overnight travel.
  • Perform other duties as assigned.


What We're Looking For

  • Strong mechanical aptitude and problem-solving skills.
  • Experience in manufacturing, machining, maintenance, automotive repair, industrial service, quality control, military, electronics, HVAC, or another technical trade.
  • Comfortable using hand tools and precision measuring instruments.
  • Ability to learn new technical processes and procedures.
  • Excellent attention to detail.
  • Strong verbal and written communication skills.
  • Basic computer proficiency, including Microsoft Office.
  • Ability to adapt to new software platforms and follow detailed procedures.
  • High School Diploma or GED required.
  • Valid driver's license with a clean driving record.


Preferred Qualifications

  • 3+ years of mechanical, electrical, industrial, manufacturing, maintenance, or calibration experience.
  • Previous calibration or metrology experience.
  • Military PMEL or calibration training.
  • Quality inspection or quality assurance experience.
  • Experience using calipers, micrometers, indicators, torque tools, multimeters, oscilloscopes, pressure gauges, force gauges, or other precision measuring equipment.
  • Ability to read blueprints or engineering drawings.
  • Familiarity with ISO quality systems or regulated manufacturing environments.


Benefits

  • Competitive hourly pay ($23.00–$33.00/hour DOE)
  • Medical, Dental & Vision Insurance
  • Short-Term Disability Insurance
  • 401(k) with up to 4% Company Match
  • Three Weeks of Paid Time Off after a 120-day probationary period
  • Paid Holidays
  • Paid technical training and ongoing professional development
  • Career advancement opportunities
  • Stable, growing company serving customers nationwide


Why Fox Valley Metrology?

Fox Valley Metrology is more than a calibration laboratory—we're a trusted partner to manufacturers across North America. Every day, our technicians play a critical role in ensuring the quality, safety, and precision of products used in industries ranging from aerospace and defense to medical devices and advanced manufacturing.


If you enjoy working with precision equipment, solving technical challenges, and building specialized skills with a company that invests in your success, we'd love to hear from you.


Fox Valley Metrology is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic under applicable law.