1

Boat Rigger Jobs in Houston, TX (NOW HIRING)

Tank Barge PIC

Channelview, TX

$21.50 - $25/hr

... the rigging to perform tankering operations. Step - 2ft vertical and 2ft horizontal . * In the ... barge to the boat or from the boat to the dock. Reach: * Must be able to extend arms fully ...

Tank Barge PIC

Channelview, TX · On-site

$21.50 - $25/hr

... the rigging to perform tankering operations. Step - 2ft vertical and 2ft horizontal . * In the ... barge to the boat or from the boat to the dock. Reach: * Must be able to extend arms fully ...

Tank Barge PIC

Channelview, TX · On-site

$21.50 - $25/hr

... the rigging to perform tankering operations. Step - 2ft vertical and 2ft horizontal . * In the ... barge to the boat or from the boat to the dock. Reach: * Must be able to extend arms fully ...

Deckhand

Houston, TX · On-site

A Deckhand must be able to handle lines and rigging during tow building, locking, and docking ... A Deckhand must be able to work on the boat with a work schedule based on a ratio of 2 to 1 (i.e ...

New

Deckhand

Houston, TX · On-site

A Deckhand must be able to handle lines and rigging during tow building, locking, and docking ... A Deckhand must be able to work on the boat with a work schedule based on a ratio of 2 to 1 (i.e ...

New

Assures all lifts are within load limits of equipment and are correctly rigged. * Assures lifting ... In the absence of the Crane Operator, confers with OIM and boat captain to assess if sea and ...

Assures all lifts are within load limits of equipment and are correctly rigged. * Assures lifting ... In the absence of the Crane Operator, confers with OIM and boat captain to assess if sea and ...

Assures all lifts are within load limits of equipment and are correctly rigged. * Assures lifting ... In the absence of the Crane Operator, confers with OIM and boat captain to assess if sea and ...

Showing results 41-60

Boat Rigger information

See Houston, TX salary details

$13

$24

$34

How much do boat rigger jobs pay per hour?

As of Sep 12, 2026, the average hourly pay for boat rigger in Houston, TX is $24.84, according to ZipRecruiter salary data. Most workers in this role earn between $22.02 and $28.46 per hour, depending on experience, location, and employer.

What is a boat rigger?

A Boat Rigger is responsible for installing, inspecting, and maintaining the rigging and equipment on boats, including masts, sails, winches, and other hardware. They ensure that all components are securely fitted and functioning properly for safety and performance. Boat Riggers may also run electrical wiring, install steering systems, and test mechanical components. This job requires technical skills, attention to detail, and knowledge of different boat types and rigging systems.

What are some common challenges boat riggers face on the job?

Boat riggers often work in varied environments that may include tight quarters, outdoor conditions, and sometimes at heights, which can present physical challenges. They must frequently troubleshoot unexpected issues with rigging components or adapt to last-minute design changes, requiring strong technical problem-solving skills. Coordinating closely with boat builders, electricians, and other specialists is common, making teamwork and clear communication essential. This dynamic environment means boat riggers need to remain adaptable and safety-conscious to ensure successful project outcomes.

What are the key skills and qualifications needed to thrive in the boat rigger position, and why are they important?

To thrive as a Boat Rigger, you need a solid understanding of boat construction, mechanical aptitude, and knowledge of rigging systems, typically gained through hands-on experience or vocational training. Familiarity with specialized tools such as hoists, winches, hydraulic crimpers, and potentially safety certifications like OSHA are commonly required. Strong attention to detail, teamwork, and effective problem-solving are valuable soft skills in this position. These abilities are crucial for ensuring rigging jobs are completed safely, accurately, and efficiently to maintain high standards of marine safety and vessel performance.

What do boat riggers do on a boat?

Boat riggers install, repair, and maintain the rigging systems on boats, including masts, sails, and associated hardware. They ensure the rigging is properly tensioned and secure for safe sailing, often using tools like wrenches and hoists, and may work in outdoor environments with safety precautions. Certification and knowledge of sailing systems are beneficial for this role.

What are popular job titles related to Boat Rigger jobs in Houston, TX?

For Boat Rigger jobs in Houston, TX, the most frequently searched job titles are:

What job categories do people searching Boat Rigger jobs in Houston, TX look for?

The top searched job categories for Boat Rigger jobs in Houston, TX are:

What cities near Houston, TX are hiring for Boat Rigger jobs?

Cities near Houston, TX with the most Boat Rigger job openings:

Infographic showing various Boat Rigger job openings in Houston, TX as of September 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution, with an average salary of $51,677 per year, or $24.8 per hour.

Tank Barge PIC

Channelview, TX

$21.50 - $25/hr

Full-time

Posted 24 days ago


Job description

Overview

The primary function of a Tank Barge PIC is to prepare the barges that are assigned and complete loading and discharging of oil, refined and petrochemical cargoes. The Tank Barge PIC must communicate with dock personnel and ensure that each person participating in the transfer of product understands what the product is, and how it should be transferred and protected. The Tank Barge PIC normally works a rotating 6 days on, and 3 days off schedule.

Responsibilities

Walk 2-3 miles per day. 

  • A Kirby Corporation vessel generally has a tow that is 500 ft. in length. A Tank Barge PIC may be required to walk the tow and back in order to check the condition of the barges and the rigging to perform tankering operations.

Step - 2ft vertical and 2ft horizontal. 

  • In the process of loading or discharging two barges breasted up through a crossover hose, occasions arise where slack in one or more lines causes the barges. In addition, if one barge is loading or discharging at a faster rate than the other, a vertical height differential may develop between the decks of the adjoining barges. Also, different docks, owned by individuals other than Kirby Corporation have various combinations of the barge drafts and river stages. This makes it necessary to step across, up, down, or over an obstacle in order to gain access to the dock from the barge to the boat or from the boat to the dock.

Reach:

  • Must be able to extend arms fully, throughout a normal range of motion both in a horizontal and vertical plane. A Tank Barge PIC may be required to throw and catch lines. Complete range of motion is also required to perform engine room maintenance responsibilities, which includes reaching over one's head.

Climb:

  • Must be able to climb a 90-degree vertical ladder 25-30 ft. Different docks have various means in which to gain access to the barges that are docked at their facilities. This is especially true when the river is at a low stage.

Lift 60-75 pounds and carry it approximately 500 ft. 

  • A barge ratchet weighs approximately 60 pounds. If the lead coupling on a tow was to break, a Tank Barge PIC may be required to carry a ratchet the length of the barges in order to repair the coupling. In addition, a Tank Barge PIC may need to help move a crossover hose that would require a lift of at least 60-75 pounds.

Vision:

  • Color vision and eyesight sufficient to pass an eye test as required to obtain a merchant mariners document. This requires an uncorrected vision of at least 20/20 in each eye correctable to 20/40 in each eye.

Hearing:

  • Hearing as required to obtain a merchant mariners document.

Speech:

  • Must be able to verbally communicate in the English language both in delivery and ability to be understood. May docks use handheld radios to communicate with the barges and/or boats; therefore, use of these devices is required.

Reading/Writing:

  • Must be able to communicate by reading and writing in the English language.

Smell:

  • A sense of smell sufficient to be able to detect the presence of potentially dangerous chemical vapors.

Pulmonary Function:

  • Must pass a pulmonary function test with a minimum score of 80% with physician's approval.

Physical Condition and Ability to Wear:

  • Gloves, goggles, rubber boots, slicker suit, steel-toes boots, hard hat, five-minute escape pack, negative pressure respirator or positive pressure respirator.

General:

  • Must be able to drive to and from hub cities. Must be able to endure harsh environment, which includes extreme temperature, rain, ice, sleet, wind wave action and long hours during transfers.  Ability to use firefighting/spill containment equipment communicates with dock personnel, maintain documentation, and assist in training new personnel. Maintenance functions - ability to assist with engine and generator room maintenance.  Ability to qualify for all federal and state standards and qualify for licenses and documents.  Ability to perform all duties while wearing protective equipment.

Mental/Emotional:

  • Living and working in close quarters.  Length of time away from family. Ability to communicate in English - teach, use radio, and coordinate with dock personnel. Ability to understand written and verbal orders. Comprehension of essential information - spill containment and cleanup, MSDS and emergency action information. Video training widely used - i.e. safety meeting, Benzene training.

Possible Non-Essential Functions:

  • Swimming, cooking, and washing clothes.
Qualifications

Tank Barge PIC:  A Tank Barge PIC License is REQUIRED.

Tank Barge PICTRAINEE: No License Required. 

License Requirements:

  • Must possess a valid and current merchant mariners document with a Tank Barge PIC endorsement under 46 CFR 12/20 et seq. and a current and valid driver's license.

Education Requirements:

  • Must pass a company-approved test. In addition, must have successfully completed Kirby Corporation's training school for Tank Barge PIC.

Benzene Regulations:

Must be able to pass certification requirements of 46 CFR Part 197 Subpart C - Benzene.

Drug Regulations:

Must be able to satisfy all United States Coast Guard Chemical Drug Testing Programs for Vessel Personnel as found in 46 CFR Part 16.

Physical Examination:

In the event Kirby Corporation extends a conditional offer of employment, the employee will be subject to a physical examination by a physician appointed by Kirby Corporation.

Physical and Mental Requirements:

Necessary to safely undertake the essential functions of this position.

Employment Type: FULL_TIME