ZipRecruiter

Log In

1

Apprentice First Article Inspection As9102 Jobs (NOW HIRING)

Salient Motion

Wire Harness Design Engineer

Torrance, CA · On-site

$90K - $110K/yr

Work with suppliers to oversee initial build, first article inspection (AS9102), and production readiness. * Own supplier technical qualification and ongoing supplier engineering support for harness ...

Aerotek

Mechanical Inspector

Santa Ana, CA

$26.25 - $34.75/hr

You use precision measurement tools, follow AS9102 First Article Inspection requirements, and apply geometric dimensioning and tolerancing principles to verify product quality and compliance.

New

Triumph Group

Quality Inspector

Clemmons, NC · On-site

Maintains product quality documentation by keeping accurate records and files; such as Material Certifications, First Article Inspection Reports (AS9102), Inspection Method Sheets (IMS), First Piece ...

Fathom Mfg

Quality Inspector

Denver, CO · On-site

$24 - $26/hr

Experience completing AS9102 First Article Inspection Reports. * Familiarity with aerospace, defense, or high-precision manufacturing environments. Physical Requirements * Ability to stand and walk ...

NextDeavor Inc.

Inspector Senior

Irvine, CA · On-site

Experience with First Article inspection AS9102 (Aerospace). * Experience with mechanical inspection and GD&T knowledge. * Experience reviewing supplier certifications (material certs, special ...

NextDeavor Inc.

Inspector Senior

Irvine, CA · On-site

Experience with First Article inspection AS9102 (Aerospace). * Experience with mechanical inspection and GD&T knowledge. * Experience reviewing supplier certifications (material certs, special ...

Barnes Group

CMM Programmer - 1st Shift

Warren, MI · On-site

Apply advanced GD&T principles in accordance with ASME Y14.5. * Support First Article Inspections in accordance with AS9102. * Troubleshoot dimensional issues and support root cause investigations.

NextDeavor Inc.

Quality Inspector 1

Simi Valley, CA · On-site

$13.78 - $16.92/hr

High school diploma or equivalent; vocational training, apprenticeships, or equivalent experience ... Experience creating First Article Inspection Reports in compliance with AS9102 and customer ...

FIRST RF

Quality Inspector

Boulder, CO

$24 - $40/hr

Prepare AS9102 First Article Inspection Reports (FAIRs) * Interact with customer during Source Inspection * Archive and scan all applicable build documentation and records * Take photos of defects ...

FIRST RF CORPORATION

Quality Inspector

Boulder, CO · On-site

$24 - $40/hr

Prepare AS9102 First Article Inspection Reports (FAIRs) * Interact with customer during Source Inspection * Archive and scan all applicable build documentation and records * Take photos of defects ...

next page

Showing results 1-20

All JobsApprentice First Article Inspection As9102 Jobs

Apprentice First Article Inspection As9102 information

See salary details

$12

$22

$37

How much do apprentice first article inspection as9102 jobs pay per hour?

As of Jun 27, 2026, the average hourly pay for apprentice first article inspection as9102 in the United States is $22.02, according to ZipRecruiter salary data. Most workers in this role earn between $17.31 and $24.04 per hour, depending on experience, location, and employer.

What is the difference between Apprentice First Article Inspection As9102 vs Quality Inspector?

AspectApprentice First Article Inspection As9102Quality Inspector
CertificationsTypically in training, may have basic certificationsOften holds specific quality or industry certifications
Work EnvironmentEntry-level, on-the-job training in manufacturing/aviationRegular inspection roles in manufacturing, aerospace, or automotive
Industry UsageUsed in aerospace manufacturing, especially for initial product validationCommon across various manufacturing sectors for quality assurance

The Apprentice First Article Inspection As9102 role focuses on learning and performing initial inspections according to AS9102 standards, often as part of training. In contrast, a Quality Inspector performs ongoing quality checks, ensuring products meet specifications. While both roles involve inspection, the apprentice role emphasizes learning and compliance with aerospace standards, whereas the quality inspector role is more experienced and broad in scope.

What is AS9102 certification?

AS9102 certification refers to compliance with the AS9102 standard, which specifies the requirements for First Article Inspection (FAI) reports in the aerospace industry. An Apprentice First Article Inspection professional ensures that parts meet design specifications through detailed documentation and inspection processes aligned with this standard.

What does a first article inspector do?

A First Article Inspection (FAI) inspector verifies that a product or part meets design specifications and quality standards before mass production. They review drawings, perform measurements, and document findings using tools like calipers and CMMs, ensuring compliance with standards such as AS9102. This role is essential for quality assurance in manufacturing environments, often requiring attention to detail and knowledge of inspection procedures.

What is required for First Article Inspection?

For an Apprentice First Article Inspection (FAI) in the AS9102 standard, the process requires documenting and verifying that the initial production part meets all engineering, design, and customer requirements. This includes detailed measurement data, compliance with specifications, and proper record-keeping, often supported by inspection tools and calibration of measurement equipment. The FAI report must be completed and approved before full production begins.

Does AS9100 require First Article Inspection?

AS9100, which is a quality management system standard for the aerospace industry, does not explicitly require First Article Inspection (FAI). However, many aerospace customers and contracts, including those following AS9102 standards, often mandate FAI to verify that parts meet design and specification requirements before production. As an Apprentice First Article Inspection AS9102 role, understanding customer requirements and AS9102 standards is essential for compliance and quality assurance.
What cities are hiring for Apprentice First Article Inspection As9102 jobs? Cities with the most Apprentice First Article Inspection As9102 job openings:
What are the most commonly searched types of First Article Inspection As9102 jobs? The most popular types of First Article Inspection As9102 jobs are:
What states have the most Apprentice First Article Inspection As9102 jobs? States with the most job openings for Apprentice First Article Inspection As9102 jobs include:
Apprentice First Article Inspection As9102 jobs near you
Quality Inspector, Mechanical Assemblies

Quality Inspector, Mechanical Assemblies

Joby Aviation

San Carlos, CA • On-site

$30 - $41/hr

Full-time

Medical, Life, Retirement, PTO

Posted 20 days ago

Job description

Overview
Joby Aviation is seeking a highly organized, passionate individual to join our quality assurance team as a Quality Inspector, Mechanical Assemblies. As part of this team, you will perform incoming, in-process inspection, and final inspection of Electronic Assemblies for VTOL electric aircraft. The inspection process will help baseline the company's design efforts and pave the way for production. The Joby Aviation team is made up of extremely talented, hardworking, proactive, and hands-on individuals, operating in a very fast-paced and rewarding environment. We are looking to expand this team with like-minded individuals looking to make a mark in the transportation industry.
Responsibilities
  • Perform visual and dimensional inspection on supplied Electronic / PCBA parts.
  • Set up and operate a 3D Automated Optical Inspection machine.
  • Ensure compliance with engineering drawings, process specifications, and industry standards such as IPC-610.
  • Use precision measuring instruments, e.g., calipers and pin gauges, for inspections.
  • Document and relay nonconformance information following the MRB process.
  • Conduct first article inspection and generate first article inspection reports in compliance with SAE AS9102 (as required).

Required
  • High-school diploma or GED plus three (3) years of on-the-job experience in electronics assembly manufacturing.
  • Knowledge of 3D AOI equipment and procedures.
  • Comprehension of IPC-610 and J-STD-001 standards - certification preferred.
  • Understand traceability (product, material, and calibration).
  • Ability to work within a team environment.

Desired
  • General use of Keyance, CMM, OMM, Faro Arm, and Romer Arm.
  • Experience with digital X-Ray inspections.
  • Proficient with Polyworks.
  • Ability to program a Coordinate Measuring Machine.
  • Knowledge of AS9102 First Article Inspection Requirement.
  • Understanding basic statistical terms and techniques, how to plot data, and how to recognize out-of-control conditions.
  • ASQ Certified Quality Inspector Certificate.

Additional Information
Compensation at Joby is a combination of base pay and Restricted Stock Units (RSUs). The target base pay for this position is $30-$41/hr. The compensation package will be determined by job-related knowledge, skills, and experience.
Joby also offers a comprehensive benefits package, including paid time off, healthcare benefits, a 401(k) plan with a company match, an employee stock purchase plan (ESPP), short-term and long-term disability coverage, life insurance, and more.
Joby is an Equal Opportunity Employer.

Apply