ZipRecruiter

Log In

1

3G Weld Jobs (NOW HIRING)

HMT LLC

Welder B

Baytown, TX · On-site

$25 - $28/hr

... 3G weld test in Flux Core and Stick Welding Preferred Qualifications: Solid experience using a variety of welding equipment and procedures, such as Flux Core and Stick Solid experience using ...

Labor One Staffing

Hiring 3G/4G Welders

Brownsville, TX

$18.50 - $24.25/hr

Must know how to weld 3g / 4g fluxcore and back gouge. * Pre-testing Monday-Friday Please contact our recruiting team if you're interested. Labor One 20005 State Highway 48 Brownsville, TX 78521 Cell ...

Labor One Staffing

Hiring 3G/4G Welders

Brownsville, TX

$18.50 - $24.25/hr

Must know how to weld 3g / 4g fluxcore and back gouge. * Pre-testing Monday-Friday Please contact our recruiting team if you're interested. Labor One 20005 State Highway 48 Brownsville, TX 78521 Cell ...

Chart Industries

Welder II

Theodore, AL

$18 - $23.75/hr

Must pass 3G weld test and other weld tests including square butt, fillet, and groove joints depending on specific job requirements * Experience interpreting blueprints and bill of materials (BOM)

Chart Industries

Welder II

Theodore, AL · On-site

$18 - $23.75/hr

Must pass 3G weld test and other weld tests including square butt, fillet, and groove joints depending on specific job requirements * Experience interpreting blueprints and bill of materials (BOM)

Fecon

Welder - Rotor Weld

Lebanon, OH · On-site

$17.75 - $23.50/hr

Settings up to 250 Amp, 32 Volt, 400 IPM wire speed. * 1G, 2G and 3G welding daily. * Uses .045 - .052 metal core wire using 90/10 gas. * Grinds and wire wheels product to clean smooth surfaces for ...

FLOGISTIX LP

X-Ray Welder

El Reno, OK · On-site

$16.75 - $22.25/hr

Must pass 3G weld test. * Have minimum of 90 days rolling out pipe without issues * Satisfactory completion of a three-month probationary period to demonstrate proficiency in X-ray welding with ...

Chart Industries

Welder II

Theodore, AL · On-site

$18 - $23.75/hr

Must pass 3G weld test and other weld tests including square butt, fillet, and groove joints depending on specific job requirements * Experience interpreting blueprints and bill of materials (BOM)

FLOWCO HOLDINGS INC.

X-Ray Welder

El Reno, OK

$16.75 - $22.25/hr

Must pass 3G weld test. * Have minimum of 90 days rolling out pipe without issues * Satisfactory completion of a three-month probationary period to demonstrate proficiency in X-ray welding with ...

FECON

Welder - Rotor Weld

Lebanon, OH · On-site

$17.75 - $23.50/hr

Settings up to 250 Amp, 32 Volt, 400 IPM wire speed. * 1G, 2G and 3G welding daily. * Uses .045 - .052 metal core wire using 90/10 gas. * Grinds and wire wheels product to clean smooth surfaces for ...

WESTERMAN INC

3G Vessel Welder

Catoosa, OK

$26/hr

MUST BE ABLE TO PASS AN OPEN ROOT 3G MIG/FLUXCORE FILL IN CAP WELD TEST** * Welding: Minimum 2 years of MIG and Flux Core experience required. * Basic safety training. * Intermediate math skills and ...

Westerman Inc.

3G Vessel Welder

Catoosa, OK · On-site

$26/hr

MUST BE ABLE TO PASS AN OPEN ROOT 3G MIG/FLUXCORE FILL IN CAP WELD TEST** * Welding: Minimum 2 years of MIG and Flux Core experience required. * Basic safety training. * Intermediate math skills and ...

next page

Showing results 1-20

All Jobs3G Weld Jobs

3G Weld information

See salary details

$14

$23

$33

How much do 3g weld jobs pay per hour?

As of Jun 14, 2026, the average hourly pay for 3g weld in the United States is $23.96, according to ZipRecruiter salary data. Most workers in this role earn between $20.19 and $26.44 per hour, depending on experience, location, and employer.

Can you make $100,000 as a welder?

3G welders, who are certified to perform groove welds in the flat, horizontal, and overhead positions, can potentially earn $100,000 or more annually, especially with experience, specialized skills, and working in high-demand industries or locations. However, typical salaries vary based on factors like certification, experience, industry, and geographic region, with many welders earning between $40,000 and $70,000 per year.

What are some common challenges 3G welders face when working on vertical welding projects, and how can they overcome them?

3G welders often encounter challenges such as gravity-related issues, which can cause molten metal to sag or drip while welding in the vertical position. To overcome these, welders typically use specific techniques like adjusting their travel speed, using the correct electrode angles, and selecting suitable welding parameters. Mastery of these skills is often developed through practice and ongoing training, and many teams encourage experienced welders to mentor new hires. Working closely with supervisors and safety officers is also important to maintain quality and meet safety standards on every project.

What is the 3G position in ASME?

The 3G position in ASME refers to a vertical, groove weld in a fixed position, typically performed on a flat or horizontal surface. It is a common weld position for pipe welding and requires certification to ASME standards, with welders demonstrating proficiency in vertical welding techniques. This position is part of the qualification process for pipe welders working to ASME codes.

What is the difference between 3G Weld vs 2G Weld?

Aspect3G Weld2G Weld
PositionVertical (upward or downward)Horizontal
CertificationsTypically requires AWS or ASME certificationsSimilar certification requirements
Work EnvironmentVertical welding positions, often in construction or manufacturingHorizontal positions, common in pipe welding and fabrication
Industry UsageConstruction, shipbuilding, industrial fabricationPipeline, structural steel, industrial fabrication

Both 3G and 2G welds require similar certifications and are used in industrial settings. The main difference lies in the welding position: 3G involves vertical welding, while 2G involves horizontal welding. Understanding these differences helps welders choose the right certification and prepare for specific job requirements.

What are 3G welders?

3G welders are professionals who are skilled in performing welding in the vertical position, specifically the 3G (third groove) position. This involves welding a joint that is oriented vertically, which is a common requirement in construction and fabrication industries. 3G welding certifies that a welder can weld in a vertical groove position, which is more challenging than flat or horizontal positions due to gravity affecting the molten metal. Achieving this certification demonstrates a welder's proficiency and ability to handle complex welding tasks.

What is 1G, 2G, 3G, 4G, 5G, 6G welding position?

In welding, 1G through 6G refer to different positional classifications used to describe the orientation of welds. 1G is a flat, horizontal position, while 6G is a fixed, overhead position, often used in pipe welding and requiring advanced skills. Welders, including those in 3G welding positions, must be certified to perform welds in these various positions, which demand different techniques and levels of expertise.

What is a 3G position in welding?

A 3G position in welding refers to a vertical position where the welder performs fillet or groove welds on a vertical surface. It is a common position in pipe and structural welding, requiring skills to control weld quality and penetration while working against gravity. Certification in 3G is often required for welders working in this position.

What are the key skills and qualifications needed to thrive as a 3G Welder, and why are they important?

To thrive as a 3G Welder, you need strong proficiency in welding techniques, particularly in vertical and overhead positions, along with a high school diploma or equivalent and welding certification (such as AWS). Familiarity with welding machines, safety equipment, blueprints, and inspection tools is typically required. Attention to detail, manual dexterity, and a strong safety mindset are essential soft skills for success in this role. These competencies ensure high-quality welds, workplace safety, and adherence to project specifications across diverse welding environments.
More about 3G Weld jobs
What cities are hiring for 3G Weld jobs? Cities with the most 3G Weld job openings:
What states have the most 3G Weld jobs? States with the most job openings for 3G Weld jobs include:
What job categories do people searching 3G Weld jobs look for? The top searched job categories for 3G Weld jobs are:
3G Weld jobs near you
Infographic showing various 3G Weld job openings in the United States as of June 2026, with employment types broken down into 1% As Needed, 94% Full Time, 2% Part Time, and 3% Nights. Highlights an 93% Physical, 1% Hybrid, and 6% Remote job distribution, with an average salary of $49,837 per year, or $24 per hour.
3G Vessel Welder

3G Vessel Welder

Trinity Employment Specialists

Catoosa, OK • On-site

$25 - $29/hr

Full-time

Posted 4 days ago

Job description

3G Vessel Welder-Direct Hire

Day shift

Minimum of $25-$29/hour


SUMMARY

The Welder is responsible for set-up and operation of advanced welding equipment. This position uses expertise to solve problems and eliminate scrap, rework and downtime while effectively repairing defective products. The appearance of the repair work must be at an acceptable level and meet high quality standards. The Welder is also responsible for making sure all work is done to specification. A successful candidate is a self-motivated multi-tasker that utilizes a strong work ethic to ensure all quality levels are met.


QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential duty or responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.


ESSENTIAL DUTIES AND RESPONSIBILITIES

Regular and punctual attendance at work is an essential job function of each position and is necessary to your individual effectiveness and that of your work group. Regular and punctual attendance is required of all employees.

  • Plans details of working procedure.
  • Inspects finished product for completeness and conformance to all quality assurance procedures.
  • Safely operates all advanced level welding equipment.
  • Set up, troubleshoot, and make advanced adjustments to welding machines as needed to maintain good production and quality.
  • Participates in improvement planning – modification of welding procedures to increase safety, efficiency, and quality.
  • Follows all safety policies and procedures.
  • Consistently clocks into production jobs and maintains production averages at or above the expected standards.
  • Coordinates and communicates effectively with all departments.
  • Other duties as assigned.

EDUCATION and/or EXPERIENCE

  • **MUST BE ABLE TO PASS AN OPEN ROOT 3G MIG/FLUXCORE FILL IN CAP WELD TEST**
  • Welding: 2 years.
  • Basic safety training.
  • Intermediate math skills and ability to read a tape measure required.
  • Must have a firm understanding of volts and amps and be able to adjust accordingly.
  • Basic data entry skills for maintenance breakdown calls.
  • Capability to read and interpret blueprints, work order instructions, weld symbols, and operate required tools involved in position.
  • Must understand and follow the quality policy and procedures – detect defects.
  • Troubleshooting skills.

#MED


TRINITY EMPLOYMENT SPECIALISTS IS AN EQUAL OPPORTUNITY EMPLOYER

See the great things people are saying by checking out our Google reviews, along with our Facebook, LinkedIn, Instagram, X/Twitter.Please visit theCareer Center


* Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, solder, or heat treat metal products, components, or assemblies. Includes workers who operate laser cutters or laser-beam machines.