ZipRecruiter

Log In

1

Weekday Mould Operator Jobs (NOW HIRING)

Triangle Rubber Co

Production Cell Operator

Goshen, IN · On-site

$16 - $17/hr

Qualifications Must be able to lift 50 lbs. and be able to push/pull up to 1000 lbs. on mold carts or crane system Must be able to work overtime on weekdays and on weekends when needed. Must be able ...

Triangle Rubber Co

Production Cell Operator

Goshen, IN · On-site

$16 - $17/hr

Qualifications Must be able to lift 50 lbs. and be able to push/pull up to 1000 lbs. on mold carts or crane system Must be able to work overtime on weekdays and on weekends when needed. Must be able ...

Sazerac Company

Plastics Technician

Carrollton, TX

$19.25 - $25/hr

Previous hands-on experience operating and troubleshooting blow molding equipment. * Experience ... weekdays and growth opportunities. BuzzBallz is a woman-owned alcohol brand founded by Merrilee ...

American Tape & Label

Be Seen First

Print Machine Technician and Operator

Lakewood, CO · On-site

$19 - $24/hr

This isn't just a job; it's an opportunity to mold the future--one roll, one sheet, one product at ... Every Other Wednesday to Saturday Hours of Operation: - Weekday: 12Hr Shift from 5am to 5:30pm ...

American Tape & Label

Be Seen First

Print Machine Technician and Operator

Englewood, CO · On-site

$19 - $24/hr

This isn't just a job; it's an opportunity to mold the future--one roll, one sheet, one product at ... Every Other Wednesday to Saturday Hours of Operation: - Weekday: 12Hr Shift from 5am to 5:30pm ...

American Tape & Label

Be Seen First

Print Machine Technician and Operator

Lakewood, CO · On-site

$19 - $24/hr

This isn't just a job; it's an opportunity to mold the future--one roll, one sheet, one product at ... Every Other Wednesday to Saturday Hours of Operation: - Weekday: 12Hr Shift from 5am to 5:30pm ...

American Tape & Label

Be Seen First

Print Machine Technician and Operator

Denver, CO · On-site

$19 - $24/hr

This isn't just a job; it's an opportunity to mold the future--one roll, one sheet, one product at ... Every Other Wednesday to Saturday Hours of Operation: - Weekday: 12Hr Shift from 5am to 5:30pm ...

American Tape & Label

Be Seen First

Print Machine Technician and Operator

Arvada, CO · On-site

$19 - $24/hr

This isn't just a job; it's an opportunity to mold the future--one roll, one sheet, one product at ... Every Other Wednesday to Saturday Hours of Operation: - Weekday: 12Hr Shift from 5am to 5:30pm ...

next page

Showing results 1-20

All JobsWeekday Mould Operator Jobs

Weekday Mould Operator information

See salary details

$12

$19

$25

How much do weekday mould operator jobs pay per hour?

As of Aug 4, 2026, the average hourly pay for weekday mould operator in the United States is $19.09, according to ZipRecruiter salary data. Most workers in this role earn between $17.07 and $20.43 per hour, depending on experience, location, and employer.
What are the most commonly searched types of Mould Operator jobs? The most popular types of Mould Operator jobs are:
Weekday Mould Operator jobs near you
Infographic showing various Weekday Mould Operator job openings in the United States as of July 2026, with employment types broken down into 1% Internship, 8% As Needed, 1% Full Time, 21% Temporary, 68% Contract, and 1% Summer. Highlights an 12% Physical, and 88% Hybrid job distribution, with an average salary of $39,702 per year, or $19.1 per hour.

Manufacturing Operator 1 (Weekday 2)

Illinois Tool Works Inc

El Dorado Hills, CA • On-site

$18.05 - $22.90/hr

Full-time

Posted 25 days ago

Illinois Tool Works rating

8.0

Company rating: 8.0 out of 10

Based on 75 frontline employees who took The Breakroom Quiz

175th of 487 rated machine equipment manufacturers

Job description

Job Description:
Schedule Shift: Monday thruFriday: 9:30am-6:00pm (+ 10% shift differential)
General Responsibilities:
  • Promote a safe workplace and follow all established work policies.
  • Perform molding, demolding and other manufacturing related duties as required.
  • Help train and oversee other less experienced manufacturing materials processors to ensure daily production goals are achieved.
  • Assist Lead-Materials Processor with the operation of manufacturing equipment to produce PVA sponge product meeting product specifications.
  • Clean and assemble PVA sponge molds.
  • Follow established process operating and safety procedures.
  • Contributes to maintain and improve overall company personnel Safety.
  • Responsible for adhering to all Company, department quality and Safety procedures.
  • Other job-related duties as assigned.

Qualifications:
  • High school graduate or general education degree (GED).
  • Ability to follow written instructions.
  • Good oral and written communication skills.
  • Average computer skills.
  • Ability to work as a team member.
  • Good problem-solving skills.
  • Proven safety record.

Work Conditions:
  • Wet environment.
  • Tyvek suit required for majority of the shift.
  • Wearing of Personal Protective Equipment consisting of safety glasses, gloves, face-shield, slip resistant steel or composite toe boots, and a full-face respirator.
  • Clean shaven within OSHA regulations when required to wear a respirator.
  • Hazardous chemicals handling including skin and respiratory sensitizers, acid, and other chemicals.
  • Computer use.
  • Various analytical equipment and tools.

Physical Demands:
  • Required to work on feet up to 8 hours per shift.
  • Fast paced work environment.
  • Perform various manufacturing tasks requiring ability to lift up to 50 pounds.
  • Ø Loading and unloading molds to and from curing oven: 40 - 50 pounds.
  • Ø Manual pushing of wheeled carts loaded with empty and full product molds: 80 - 190 pounds (initial and sustained force for pushing/pulling carts up to 50 pounds).
  • Ø Filling molds and removing cured products from molds consists of ongoing arm and hand movements from shoulder to waist height for durations of up to two-hour periods.
  • Ø Mold cleaning and preparation includes constant hand and arm movement at waist height. Light lifting: 2 - 5 pounds.
  • Ø Processing and neutralization of cast-to-mandrel products consists of constant hand and arm movement between shoulder and waist height for durations of up to two-hour periods. Bending at waist and lifting of product storage bins: 15 - 20 pounds.
  • Ø Draining of water filled temporary product storage tubs: 40 - 50 pounds.
  • Regular attendance is required.

Compensation Information:
Starting wage is $18.05 - $22.90 + 10% shift differential.

What Illinois Tool Works employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Illinois Tool Works logo

About Illinois Tool Works

Sourced by ZipRecruiter

ITW is a global industrial company built around a differentiated and proprietary business model. The company’s seven industry-leading segments leverage the unique ITW Business Model to drive solid growth with best-in-class margins and returns in markets where highly innovative, customer-focused solutions are required. From state-of-the-art dishwashers, ovens and refrigerators in restaurants and hotels, to automobile components inside vehicles all over the world ... the products we manufacture and the solutions we design are all around us. The buildings where we live and work are built with ITW construction and welding products, and our ITW test & measurement solutions help to ensure the quality and safety of millions of products. ITW’s dedicated colleagues around the world thrive in the company’s decentralized and entrepreneurial culture. Our leaders have deep expertise in the ITW Business Model and leverage it to deliver superior performance and value to our customers.

Industry

Machinery manufacturing

Company size

10,000+ Employees

Headquarters location

Glenview, IL, US

Year founded

1912

View All Illinois Tool Works Jobs

Apply