1

Wan Jobs in Virginia (NOW HIRING)

CORE/WAN Network Lead

Sterling, VA ยท On-site

$100K - $138K/yr

CORE/WAN Network Lead Job Category: Information Technology Time Type: Full time Minimum Clearance Required to Start: TS/SCI Employee Type: Regular Percentage of Travel Required: Up to 10% Type of ...

LAN/WAN Engineer SME Alexandria, VA Job Summary: IT Veterans is currently seeking a LAN/WAN Engineer SME to join our team.You must have an active TS/SCI clearance with the ability to gain and ...

LAN/WAN Engineer SME Alexandria, VA Job Summary: IT Veterans is currently seeking a LAN/WAN Engineer SME to join our team. You must have an active TS/SCI clearance with the ability to gain and ...

Lead LAN/WAN Engineer

Reston, VA

$105K - $145K/yr

What Impact You'll Have We have an exciting opportunity for an experienced Lead LAN/WAN Engineer who will provide expert design, analysis, research, and operation support to exceptionally complex ...

LAN/WAN Engineer SME Alexandria, VA Job Summary: IT Veterans is currently seeking a LAN/WAN Engineer SME to join our team.You must have an active TS/SCI clearance with the ability to gain and ...

CORE/WAN Network - Tier 3

Sterling, VA ยท On-site

$103K - $141K/yr

CORE/WAN Network - Tier 3 Job Category: Information Technology Time Type: Full time Minimum Clearance Required to Start: TS/SCI with Polygraph Employee Type: Regular Percentage of Travel Required: Up ...

next page

Showing results 1-20

Wan information

See Virginia salary details

$95.2K

$166.1K

$214.1K

How much do wan jobs pay per year?

As of Aug 17, 2026, the average yearly pay for wan in Virginia is $166,096.00, according to ZipRecruiter salary data. Most workers in this role earn between $139,800.00 and $190,400.00 per year, depending on experience, location, and employer.

What are common challenges faced by WAN engineers when managing large-scale networks?

WAN engineers often encounter challenges related to network latency, bandwidth optimization, and ensuring consistent connectivity across geographically dispersed sites. Managing security, troubleshooting intermittent connectivity issues, and maintaining compliance with evolving industry standards are also frequent concerns. Collaboration with IT teams, service providers, and end-users is essential to identify bottlenecks and implement solutions that maintain high network performance and reliability.

What are the key skills and qualifications needed to thrive as a WAN engineer, and why are they important?

To thrive as a WAN Engineer, you need a strong understanding of network protocols, routing, switching, and WAN optimization, usually supported by a degree in computer science or a related field. Familiarity with tools such as Cisco IOS, Juniper routers, network monitoring systems, and certifications like CCNA or CCNP is highly valued. Excellent problem-solving, attention to detail, and effective communication are important soft skills for diagnosing issues and collaborating with teams. These skills and qualities are essential to maintain reliable, secure, and high-performing network infrastructures across multiple locations.

What is a WAN engineer?

WAN engineers are IT professionals who design, implement, and maintain Wide Area Networks (WANs) that connect multiple locations of an organization over large geographical areas. They ensure secure, efficient, and reliable data communication between offices, data centers, and remote users. WAN engineers troubleshoot network issues, manage network hardware, optimize performance, and often work with technologies such as MPLS, VPNs, and SD-WAN. Their expertise is crucial for businesses that rely on seamless connectivity across different sites.

What is the difference between Wan vs Network Technician?

AspectWanNetwork Technician
CertificationsCCNA, CompTIA Network+CCNA, CompTIA Network+
Work EnvironmentLarge-scale networks, ISPs, data centersOffice, client sites, small to medium networks
Industry UsageTelecommunications, internet providersIT support, network setup and maintenance

Wan (Wide Area Network) specialists focus on large-scale network infrastructure connecting multiple locations over long distances, often working with ISPs and data centers. Network Technicians handle day-to-day network setup, troubleshooting, and maintenance within smaller networks or client sites. While both roles require similar certifications and work in related environments, Wan roles are more specialized in large network architecture, whereas Network Technicians focus on operational support and implementation.

What are popular job titles related to Wan jobs in Virginia?

For Wan jobs in Virginia, the most frequently searched job titles are:

Infographic showing various Wan job openings in Virginia as of August 2026, with employment types broken down into 89% Full Time, 3% Part Time, and 8% Contract. Highlights an 84% Physical, 8% Hybrid, and 8% Remote job distribution, with an average salary of $166,096 per year, or $79.9 per hour.

Senior Network Engineer - SD-WAN Provisioning

CYKOR LLC

Annandale, VA โ€ข On-site

$103K - $141K/yr

Full-time

Posted 4 days ago


Job description

Full-Time (Contract) | Hybrid/Remote: Washington, DC/Annapolis, MD
CyKor is a fast-growing Technology Solutions Provider to both federal and commercial clients. We attribute our continued growth to our core values, our professional team, and the valuable relationships with our clients. Our small and growing team fosters an environment in which each team member is respected, valued, and appreciated for their contributions.
CyKor is seeking a Senior Network Engineer - SD-WAN Provisioning to provide hands-on engineering support for the federal Enterprise SD-WAN program. This position will serve as a senior technical resource supporting the local provisioning and staging desk in the Annapolis, MD area, preparing network equipment for enterprise deployment to federal shore and afloat locations.
The Engineer will be responsible for provisioning, configuring, testing, validating, troubleshooting, and documenting Cisco SD-WAN network equipment prior to field deployment. This position requires strong hands-on Cisco routing and SD-WAN experience and the ability to rapidly troubleshoot configuration, software, hardware, and connectivity issues.
The ideal candidate is a senior-level network engineer who is comfortable working at the bench as well as coordinating with architects, automation engineers, integration teams, Tier 3 support personnel, logistics staff, and technical stakeholders.
ROLES AND RESPONSIBILITIES:
SD-WAN Provisioning & Staging
  • Perform hands-on provisioning, staging, configuration, and validation of Cisco SD-WAN routers and associated network equipment.
  • Prepare equipment for deployment to federal shore and afloat operational environments.
  • Load and validate approved software, firmware, configurations, certificates, and security baselines.
  • Execute standardized provisioning procedures, checklists, and acceptance testing.
  • Validate device connectivity and successful registration with applicable SD-WAN controllers and management platforms.
  • Verify device inventory, serial numbers, configuration status, and deployment readiness.
  • Identify and resolve provisioning failures before equipment is released for installation.
  • Support high-volume provisioning requirements associated with Full Rate Deployment (FRD).

Network Engineering & Troubleshooting
  • Troubleshoot Layer 2/Layer 3 networking, routing, switching, transport, VPN, and SD-WAN connectivity issues.
  • Troubleshoot Cisco IOS-XE and SD-WAN configuration and software issues.
  • Validate routing protocols, interfaces, tunnels, segmentation, policies, and network reachability.
  • Analyze device logs and technical data to isolate hardware, software, configuration, and connectivity problems.
  • Support root-cause analysis for failed provisioning or deployment events.
  • Escalate architecture or systemic issues to the Network Architect and engineering leadership when required.
  • Provide senior-level technical assistance to junior engineers and provisioning personnel.

Cisco SD-WAN
  • Configure and troubleshoot Cisco Catalyst SD-WAN / Viptela environments.
  • Support SD-WAN edge router onboarding and controller registration.
  • Validate control and data plane connectivity.
  • Support configuration templates, device templates, policies, segmentation, VPNs, and transport configurations.
  • Troubleshoot controller communication and device onboarding issues.
  • Support Zero Trust and network segmentation requirements incorporated into the federal enterprise architecture.

Automation & Standardization
  • Work closely with automation engineers to identify repeatable provisioning processes suitable for automation.
  • Support development and validation of automated provisioning workflows.
  • Assist with testing configuration templates and automated deployment processes.
  • Identify opportunities to improve provisioning speed, accuracy, repeatability, and quality.
  • Support configuration management and standardized baseline development.

Deployment & Tier 3 Engineering Support
  • Provide technical reach-back support to integration engineers performing field installations.
  • Troubleshoot equipment that fails installation or post-deployment validation.
  • Assist Tier 3 engineering personnel with complex SD-WAN issues.
  • Capture lessons learned from provisioning and deployment activities.
  • Coordinate with integration teams to ensure field issues are incorporated into future provisioning procedures.

Documentation & Configuration Management
  • Maintain accurate provisioning and configuration records.
  • Document device status, serial numbers, configurations, software versions, defects, and disposition.
  • Update engineering procedures, provisioning guides, checklists, and technical documentation.
  • Maintain configuration control in accordance with federal program requirements.
  • Ensure equipment is fully documented and technically ready prior to release for deployment.

REQUIREMENTS:
  • 5-8+ years of progressively responsible network engineering experience, including senior-level troubleshooting responsibilities.
  • Strong hands-on experience with Cisco routing and switching technologies.
  • Demonstrated experience configuring and troubleshooting Cisco IOS/IOS-XE devices.
  • Experience with Cisco Catalyst SD-WAN / Viptela or comparable enterprise SD-WAN technologies.
  • Strong understanding of TCP/IP, IPv4/IPv6, VLANs, VPNs, BGP, OSPF, QoS, IPsec, network segmentation, WAN transport technologies
  • Experience staging, provisioning, configuring, and validating enterprise network equipment.
  • Ability to troubleshoot complex network issues using CLI, logs, packet-level information, and network management tools.
  • Experience working from engineering drawings, configuration templates, implementation plans, and technical procedures.
  • Strong documentation and configuration-management discipline.
  • Ability to work effectively in a high-volume provisioning environment supporting aggressive deployment schedules.
  • Ability to work on-site in the Annapolis, Maryland area.
  • An active Secret clearance or higher

PREFERRED QUALIFICATIONS:
  • Previous federal enterprise network experience.
  • Experience supporting large-scale enterprise SD-WAN deployments.
  • Experience with Cisco Catalyst 8000-series routers.
  • Experience with Cisco Catalyst 9000-series switching.
  • Familiarity with Cisco Catalyst SD-WAN Manager, Controller, and Validator components.
  • Experience with Cisco ISE, network access control, or Zero Trust Architecture.
  • Familiarity with DISA STIGs and Federal cybersecurity configuration requirements.
  • Experience with Ansible / Red Hat Ansible Automation Platform (AAP) or network automation.
  • Experience supporting both shore-based and afloat/maritime network environments.
  • Experience supporting network equipment staging, warehouse, bench, or deployment operations.
  • Experience providing Tier 3 network engineering support.

CERTIFICATIONS:
Required / Strongly Preferred
  • CCNP Enterprise or equivalent demonstrated Cisco enterprise networking experience.
  • Security+ CE or equivalent DoD 8570/8140-aligned certification

Desired
  • Cisco SD-WAN / Catalyst SD-WAN training or certification.
  • CCIE Enterprise Infrastructure.
  • Cisco DevNet or network automation certification.
  • ITIL Foundation.

Education
Bachelor's degree in Information Technology, Computer Science, Engineering, Cybersecurity, or a related technical discipline preferred. Relevant military technical training, industry certifications, and significant hands-on network engineering experience may be considered in lieu of degree requirements.