1

Temporary Rf Design Engineer Jobs in Florida (NOW HIRING)

Design, test, and integrate RF sensors and subsystems across frequencies from MHz through ... Experience interacting across engineering disciplines (e.g. Systems, Mechanical, SW, Algorithms ...

Provide technical management and oversight of suppliers, including interfacing on design, build ... RF/Microwave Engineering * Antenna Engineering * Radar Systems * Experience interfacing with ...

Communications systems design * Data link hardware development * Algorithm development * Digital ... Experience with system engineering of RF subsystems. * Experience with waveform simulations using ...

Position Overview As an RF PCB Design Engineer at Orion Edge, you will own the physical realization of our radio frequency hardware. Every emitter, receiver, and signal chain we field begins as a ...

We are looking for a motivated Sr. Principal Design Engineer with a solid background in RF design, excellent communication skills, and strong drive to produce best in class products. The engineer ...

Staff RFIC Design Engineer

Apopka, FL · On-site

$144K - $187K/yr

Switch/LNA/RF IC Design Engineer, the design of GaAs/SOI/SiGe/CMOS based switch and LNA or RFIC's for Front End Modules. Responsibilites: * Work with Marketing, internal and external module designers ...

Staff RFIC Design Engineer

Apopka, FL · On-site +1

$144K - $187K/yr

Switch/LNA/RF IC Design Engineer, the design of GaAs/SOI/SiGe/CMOS based switch and LNA or RFIC's for Front End Modules. Responsibilites: * Work with Marketing, internal and external module designers ...

Apply technical principles of engineering and electronics and utilize RF synthesis and simulation software packages to design, simulate and prototype new OCXO's with state-of-the-art ultra-low phase ...

The RF/Analog Design Engineer responsibilities include, but are not limited to the following: * Designs and develops high speed analog products for electro-optics, laser electronics, and other ...

Showing results 41-60

Temporary Rf Design Engineer information

What is a temporary RF design engineer?

Temporary RF Design Engineers are professionals who are hired on a short-term or contract basis to design, test, and optimize radio frequency (RF) systems and components. Their work typically involves tasks such as creating RF circuit layouts, performing simulations, troubleshooting issues, and ensuring compliance with industry standards. They may work in industries like telecommunications, aerospace, or consumer electronics, and often collaborate with other engineering teams to deliver functional prototypes or products. Their temporary status means they are usually brought in to address specific project needs or to provide specialized expertise for a limited duration.

What are some typical challenges faced by temporary RF design engineers, and how can they adapt quickly to new projects?

Temporary RF Design Engineers often encounter challenges such as rapidly acclimating to unfamiliar project requirements, integrating with existing teams, and understanding unique client specifications. To succeed, it's important to quickly review project documentation, establish clear communication with team members, and leverage previous experience to troubleshoot issues efficiently. Adaptability, strong technical fundamentals, and proactive problem-solving are key qualities that help temporary engineers deliver results within tight timelines.

What are the key skills and qualifications needed to thrive as a temporary RF design engineer, and why are they important?

To thrive as a Temporary RF Design Engineer, you need a solid background in electrical engineering, expertise in RF circuit design, and familiarity with wireless communication standards, often supported by a relevant degree. Proficiency in tools like Cadence, ADS, HFSS, and spectrum analyzers, along with knowledge of simulation software, is typically required. Strong problem-solving, teamwork, and communication skills help you collaborate effectively and adapt to project demands. These abilities ensure efficient design, troubleshooting, and timely delivery of high-quality RF solutions in a fast-paced, project-based environment.

What is the difference between Temporary Rf Design Engineer vs RF Design Engineer?

AspectTemporary Rf Design EngineerRF Design Engineer
CredentialsBachelor's in Electrical Engineering, RF certificationsBachelor's or higher in Electrical Engineering, RF certifications
Work EnvironmentContract-based, project-specificFull-time, ongoing projects
Industry UsageTemporary staffing for telecom, defensePermanent roles in wireless, telecom companies

The main difference is that a Temporary Rf Design Engineer works on short-term, project-based assignments, often through staffing agencies, while an RF Design Engineer typically holds a permanent position with ongoing responsibilities. Both roles require similar qualifications, but their employment nature and duration differ.

What are the most commonly searched types of Rf Design Engineer jobs in Florida?

The most popular types of Rf Design Engineer jobs in Florida are:

What are popular job titles related to Temporary Rf Design Engineer jobs in Florida?

For Temporary Rf Design Engineer jobs in Florida, the most frequently searched job titles are:

What job categories do people searching Temporary Rf Design Engineer jobs in Florida look for?

The top searched job categories for Temporary Rf Design Engineer jobs in Florida are:

What cities in Florida are hiring for Temporary Rf Design Engineer jobs?

Cities in Florida with the most Temporary Rf Design Engineer job openings:

Infographic showing various Temporary Rf Design Engineer job openings in Florida as of August 2026, with employment types broken down into 87% Full Time, 5% Part Time, and 8% Contract. Highlights an 98% In-person, and 2% Hybrid job distribution.

Senior Principal RF Subsystems Engineer

Raytheon

Orlando, FL

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 5 days ago


RTX rating

8.2

Company rating: 8.2 out of 10

Based on 86 frontline employees who took The Breakroom Quiz

38th of 72 rated aerospace companies


Job description

Date Posted:

2026-06-15

Country:

United States of America

Location:

US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Effector RF Team at Raytheon is seeking a talented Senior Principal Engineer to join our team in Tucson, AZ.  The candidate will be responsible for leading and shaping the architecture, analysis, design, and implementation of RF subsystems and sensors within missile products. The selected candidate will be expected to provide technical oversight, delegate tasks, and work with the Engineering organization to establish technology roadmaps, enable modernization, and contribute to general innovation. In addition, the candidate will interface with government personnel and program leadership on a regular basis. The candidate will be responsible for providing guidance, coaching, mentoring, and training to other employees across the business within the candidate’s areas of expertise.

This position is an onsite role, located in Tucson, AZ.

What You Will Do

  • Specify, design, and test advanced RF sensors and subsystems across frequencies from MHz through millimeter-wave.

  • Decompose system-level requirements into detailed RF component requirements.

  • Measure RF components/sensors/subsystems, including performance in chamber and range environments.

  • Perform modeling and analysis of link budgets, RF cascades, electromagnetic emissions (EME), antenna patterns, phase noise, receiver sensitivity, transmitter power, spurious signals, modulation, isolation, and ADC characteristics.  

Qualifications You Must Have

  • Master of Science degree in Technology, Engineering, or Mathematics (STEM)

  • A minimum of 10 years of prior relevant experience, or a PhD in a related field and minimum 7 years of experience to include any combination of the following:

    • Design, integration, and/or test of RF subsystems

    • Design, integration, and/or test of RF sensors

    • Experience interacting across engineering disciplines (e.g. Systems, Mechanical, SW, Algorithms, etc.) to define RF subsystem requirements and evaluate performance

  • Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date with the ability to obtain special program access after start.   

Qualifications We Prefer

  • Advanced knowledge of RF component technologies, including circuit card assemblies (CCAs), waveguides, planar/printed antennas, RF modules, and monolithic microwave integrated circuits (MMICs).

  • Experience performing Link Budget analyses.

  • Understanding of antenna patterns and RF measurements with antennas and electronics.

  • Expertise in concepts such as phase noise, mixer conversion spurs, automatic gain control (AGC), sensitivity, intermodulation distortion (IMD), bit error rate, instantaneous bandwidth, adjacent channel interference, and ADC measurements/calculations (Nyquist and SFDR).

  • Familiarity with equipment such as Spectrum Analyzers, Network Analyzers, Signal Generators, and Arbitrary Waveform Generators (ARB Generators).

  • Strong understanding of electromagnetic interference (EMI) and electromagnetic vulnerability (EMV) along with mitigation strategies in RF systems.

  • Excellent written communication and oral presentation skills.

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: https://www.state.gov/m/ds/clearances/c10978.htm

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 132,400 USD - 251,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms


What RTX employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom


RTX logo

About RTX

Sourced by ZipRecruiter

Industry

Guided missile and space vehicle manufacturing, it services, aerospace product and parts manufacturing and engineering professional services

Company size

10,000+ Employees

Headquarters location

Waltham, MA, US

Social media