ZipRecruiter

Log In

1

Temporary Hardware Integration Engineer Jobs in Rochester, NY

Redcom Laboratories, Inc.

SYSTEMS ENGINEER

Victor, NY · On-site

  • Medical

  • Dental

  • Vision

  • Retirement

  • PTO

Collaboratively design and document system architectures to meet requirements, integrating hardware ... Apply engineering best practices and ensure compliance with quality and regulatory standards ...

REDCOM Laboratories, Inc.

SYSTEMS ENGINEER

Victor, NY · Hybrid

  • Medical

  • Dental

  • Vision

  • Retirement

  • PTO

Collaboratively design and document system architectures to meet requirements, integrating hardware ... Apply engineering best practices and ensure compliance with quality and regulatory standards ...

L3HHCM20

Specialist, Electrical Engineer

Rochester, NY · On-site

$80K - $149K/yr

  • Medical

  • Retirement

  • PTO

... and integrated circuitry for complex, high performance hardware systems * Determines design ... Experience with programmable logic devices In compliance with pay transparency requirements, the ...

Calvary Robotics

Controls Engineer

Webster, NY · On-site

$95K - $120K/yr

Design/Specify and Integrate Electrical, Pneumatic, and Hydraulic Control Systems Hardware for ... PLC/HMI programming - Rockwell (Preferred), Siemens, Beckhoff or other * Knowledge of Robotic ...

Calvary Robotics

Controls Engineer

Webster, NY · On-site

$95K - $120K/yr

Design/Specify and Integrate Electrical, Pneumatic, and Hydraulic Control Systems Hardware for ... PLC/HMI programming - Rockwell (Preferred), Siemens, Beckhoff or other * Knowledge of Robotic ...

previous page

Showing results 41-60

All JobsHardware Integration Engineer JobsTemporary Hardware Integration Engineer JobsTemporary Hardware Integration Engineer Jobs in Rochester, NY

Temporary Hardware Integration Engineer information

See Rochester, NY salary details

$50.3K

$144.3K

$193.9K

How much do temporary hardware integration engineer jobs pay per year?

As of Aug 15, 2026, the average yearly pay for temporary hardware integration engineer in Rochester, NY is $144,281.00, according to ZipRecruiter salary data. Most workers in this role earn between $121,900.00 and $160,800.00 per year, depending on experience, location, and employer.

What is the difference between Temporary Hardware Integration Engineer vs Hardware Test Engineer?

AspectTemporary Hardware Integration EngineerHardware Test Engineer
CredentialsRelevant engineering degrees, certifications in hardware or systems integrationEngineering degrees, certifications in testing or quality assurance
Work EnvironmentDesign labs, integration sites, manufacturing facilitiesTesting labs, quality assurance departments, production lines
Industry UsageElectronics, telecommunications, consumer devicesElectronics, consumer devices, industrial equipment
Common Search IntentIntegration, hardware setup, system assemblyTesting, validation, quality assurance

The Temporary Hardware Integration Engineer focuses on assembling and integrating hardware components within systems, ensuring compatibility and functionality during project phases. In contrast, the Hardware Test Engineer specializes in testing hardware products to identify defects and verify performance. Both roles require technical expertise but serve different stages of product development and quality assurance.

What does a temporary hardware integration engineer do?

A temporary hardware integration engineer is responsible for testing, installing, and troubleshooting hardware components within systems or products. They collaborate with design and engineering teams to ensure hardware functions correctly and meets specifications, often using tools like oscilloscopes and soldering equipment. This role typically requires knowledge of hardware design, integration processes, and relevant certifications, with assignments lasting for a limited period based on project needs.

What cities near Rochester, NY are hiring for Temporary Hardware Integration Engineer jobs?

Cities near Rochester, NY with the most Temporary Hardware Integration Engineer job openings:

Temporary Hardware Integration Engineer jobs near you

RF Hardware Design Engineer (Mid Level)

Vanteon Corporation

Pittsford, NY • On-site

$95K - $125K/yr

Full-time

Re-posted 1 hour ago

Job description

Job Title: RF Hardware Design Engineer (Mid-Levels)
Department: Engineering
Reports To: Director of Engineering
Job Summary:
Vanteon is actively seeking applicants for multiple RF Hardware Engineer roles. The specific level/title will depend on the applicant's experience. In general, this role is responsible for the development of high-speed digital, RF, and Microwave circuit designs and the analysis/simulation of wireless communication systems (typically in the 130 MHz to 6 GHz frequency bands). Due to the nature of this role, you must be willing and able to be on-site at Vanteon's Western NY facility to be successful.
Duties/Responsibilities
The following is a list of expected duties to be involved with the position. It is not fully inclusive, and additional ones may be assigned as determined by management:
  • RF design simulations, design specifications, and board layout
  • Board-level high-speed digital design and schematic capture
  • Digital system architecture development & partitioning
  • Analyze systems for developing system requirement specifications
  • Develop detailed designs and technical documentation
  • Provide mentoring to junior-level engineers
  • Collaborate with other engineers in design and integration efforts.
Required Specialized Skills/Knowledge
  • Digital communications and RF systems experience, including link margin/system gain analysis.
  • Microstrip / Stripline design.
  • Experience with RF, microwave, or analog circuit design software
  • Understanding and experience with high-speed PCB design and EMC compliance issues
  • Experience with high-pitch count device schematic designs and layout (BGAs, etc.)
  • Experience designing VHF/UHF/microwave filters, amplifiers, oscillators, and mixers
  • Experience using signal generators, network analyzers, and spectrum analyzers.
  • Understanding of nonlinear circuits, measurements, and simulation techniques.
  • Experience with Altium EDA tools
  • Excellent analytical and communication skills
  • Highly motivated, well-organized self-starter
Education and Experience:
  • Bachelor of Science in Electrical Engineering (MS Preferred)
  • 5 years of hardware design experience, with a minimum of 2 years in RF design and development
Other Requirements
  • Training and most duties require a regular in-office presence (Western NY). Hybrid/flexible scheduling available based on business needs.
  • Although minimal, some circumstances may require a weekly commitment above 40 hours or hours outside of regular business hours.
Physical Requirements:
  • Prolonged periods sitting at a desk and working on a computer
  • Be able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching.
  • Must be able to lift up to 15 pounds at times.

The physical demands described above represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Equal Opportunity Employer
Vanteon Corporation provides equal employment opportunities to all employees and applicants for employment. It prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
Compensation Range
A candidate's compensation will depend heavily on their skills and experience and will include a very competitive benefits package. Position is eligible for a variety of bonuses, including client referrals, employee referrals, publications, and extra effort.
The estimated range for specific positions associated with this job posting is:
  • RF Engineer - $95,000 to $115,000
  • Senior RF Engineer - $105,000 to $125,000

If you have some experience in RF design and are looking for a junior role. We encourage you to apply as well.
Applying
Applicants should submit a resume and cover letter to Ronnie Ells - careers@vanteon.com.
Please note that all offers of employment are contingent on passing E-Verify, background, and drug screenings. In addition, you must be able to work with ITAR and CUI data.
About Vanteon
Vanteon LLC, a wholly owned subsidiary of Performance Drone Works, is an engineering services company specializing in wireless and RF design. We offer Analog, Digital, RF, Hardware, Software, and FPGA design services. At Vanteon, we develop products for companies that range from small start-ups to large Fortune 50 companies. The designs we create include Software-Defined Radio (SDR), Wi-Fi, Bluetooth, etc., for markets such as telecom (3G, 4G, 5G cellular), Aviation, Medical, Government, Industrial, and more. Types of projects include handheld devices, wearables, RADAR, signal/spectrum analyzers, and wireless widgets of all kinds. Vanteon has been voted one of the "Best Companies to Work for in NY" for 15 years running; most times, we've ranked in the top 5.
Vanteon logo

About Vanteon

Sourced by ZipRecruiter

Industry

Wireless telecommunications carriers

Company size

201 - 500 Employees

Headquarters location

Fairport, NY, US

Year founded

1985

View All Vanteon Jobs

Apply