ZipRecruiter

Log In

1

Strain Gage Jobs (NOW HIRING)

TiltEdge Solutions LLC

NVH Test Engineer

Columbus, IN · On-site

$90K - $100K/yr

Strain gage test planning (strain gage, selection, placement, and bridge configuration) Strain gage data acquisition, Data processing, Perform fatigue testing and subsequent duty cycle analysis.

CUBRC INC

Aerodynamic Balance Technician

Oakwood, OH · On-site

$65K - $80K/yr

This role focuses on strain gage installation, fine lead wire routing, solder junction preparation, bridge wiring, and precision balance assembly. The hardware you build will support hypersonic ...

TAD PGS, Inc

Tests and Instrumentation

Stratford, CT · On-site

$30 - $45/hr

Experience and ability to accomplish required surface preparation, strain gage measurement, layout, alignment and bonding. * Experience with measurement systems, instrumentation wiring, documentation ...

CUBRC Inc.

Aerodynamic Balance Technician

Dayton, OH · On-site

$65K - $80K/yr

This role focuses on strain gage installation, fine lead wire routing, solder junction preparation, bridge wiring, and precision balance assembly. The hardware you build will support hypersonic ...

TAD PGS, Inc

Tests and Instrumentation

Stratford, CT · On-site

$21.43 - $68/hr

Experience and ability to accomplish required surface preparation, strain gage measurement, layout, alignment and bonding. * Experience with measurement systems, instrumentation wiring, documentation ...

TAD PGS, Inc.

Tests and Instrumentation

Stratford, CT · On-site

$21.43 - $68/hr

Experience and ability to accomplish required surface preparation, strain gage measurement, layout, alignment and bonding. * Experience with measurement systems, instrumentation wiring, documentation ...

Interface

Be Seen First

Soldering Assembler

Scottsdale, AZ · On-site

$21/hr

By maintaining the entire process, from design, machining, strain gage manufacturing and assembly, and in our own facilities, we can ensure the highest degree of performance possible. Company ...

Interface

Be Seen First

Calibration Technician

Scottsdale, AZ · On-site

$22/hr

By maintaining the entire process, from design, machining, strain gage manufacturing and assembly, and in our own facilities, we can ensure the highest degree of performance possible. Company ...

idexcel

Lead Advanced Engineering Technician

Phoenix, AZ · On-site

$43K - $56K/yr

Knowledge of strain gage and thermocouple applications would be beneficial. Fabricate tooling and fixtures of own design to successfully accomplish tasks. Effectively communicate job estimate and ...

Orscheln Industries

Test Technician

Wellington, MO · On-site

Qualifications and Desired Skills · Computer skills · Communication skills · Understand blueprint and product specifications · Use and recommend test gauging and data acquisition · Strain gage ...

next page

Showing results 1-20

All JobsStrain Gage Jobs

Strain Gage information

See salary details

$5

$50

$96

How much do strain gage jobs pay per hour?

As of Aug 25, 2026, the average hourly pay for strain gage in the United States is $50.32, according to ZipRecruiter salary data. Most workers in this role earn between $37.98 and $60.82 per hour, depending on experience, location, and employer.

What is a strain gage and how is it used?

Strain gages are sensors used to measure the amount of strain (deformation) experienced by an object when a force is applied. They consist of a thin wire or foil arranged in a specific pattern, which changes its electrical resistance as it stretches or compresses. Strain gages are commonly used in engineering and manufacturing to test the structural integrity of materials, monitor load and stress in bridges, buildings, and machinery, and in experimental stress analysis. By converting mechanical deformation into a measurable electrical signal, they provide valuable data for designing safer and more efficient structures.

What are the key skills and qualifications needed to thrive as a strain gage technician, and why are they important?

To thrive as a Strain Gage Technician, you need a solid understanding of mechanical engineering principles, experience with strain gage installation, and typically a technical diploma or associate degree in engineering technology. Familiarity with data acquisition systems, signal conditioning equipment, and calibration tools is essential, as is knowledge of relevant standards such as ASTM or ISO. Attention to detail, strong problem-solving abilities, and effective communication skills help ensure precision and reliability in test setups and reporting. These skills and qualities are vital for producing accurate measurements that support critical engineering analyses and product development.

What are some common challenges faced by strain gage technicians during installation and data collection?

Strain gage technicians often encounter challenges such as ensuring proper surface preparation, maintaining accurate alignment, and preventing environmental factors like moisture or temperature fluctuations from affecting readings. Achieving reliable adhesive bonding and avoiding electrical noise are also critical for precise measurements. Technicians typically work closely with engineers and quality control teams to troubleshoot issues and validate data, which requires attention to detail and strong communication skills.

What is the difference between Strain Gage vs Test Technician?

AspectStrain GageTest Technician
Required CredentialsTechnical training, certifications in electronics or instrumentationHigh school diploma, technical or associate degree often preferred
Work EnvironmentLaboratories, manufacturing plants, research facilitiesTesting labs, production lines, quality assurance departments
Industry UsageMeasurement, structural testing, materials researchProduct testing, quality control, equipment calibration

While both roles are involved in testing and measurement, a Strain Gage specializes in applying sensors to measure strain and stress in materials, whereas a Test Technician conducts broader testing procedures on products or systems. Understanding these differences helps clarify career paths and job expectations in the testing and measurement industry.

More about Strain Gage jobs

What states have the most Strain Gage jobs?

States with the most job openings for Strain Gage jobs include:

What job categories do people searching Strain Gage jobs look for?

The top searched job categories for Strain Gage jobs are:

Strain Gage jobs near you
Infographic showing various Strain Gage job openings in the United States as of August 2026, with employment types broken down into 3% As Needed, 80% Full Time, 15% Part Time, and 2% Contract. Highlights an 91% Physical, and 9% Remote job distribution, with an average salary of $104,667 per year, or $50.3 per hour.

Instrumentation Engineeer -21587

Catapult Solutions Group

Stratford, CT • On-site

$20 - $68/hr

Contractor

Re-posted 29 days ago

Job description

Engineering - Instrumentation Technician
Department: Engineering - Test Operations
Location: Stratford, CT | On-Site Full Time
Role Type: Contingent Contract Position (6-month contract, 4/10 schedule, 1st Shift)
About Our Client
Our client is a global aerospace and defense leader with decades of innovation in advanced rotorcraft and defense systems. Operating across multiple continents, they design and manufacture cutting-edge aircraft and components for military and commercial applications. Committed to precision engineering and operational excellence, they support critical flight test and ground test operations that push the boundaries of aerospace technology.
Job Description
You'll play a critical role in supporting ongoing engineering flight and ground test operations by performing precision strain gage installations on advanced aircraft and facility components. This is hands-on technical work that directly impacts the validation of next-generation aerospace systems. You'll work alongside experienced engineering teams, applying sophisticated measurement techniques to components manufactured from various metals and composites.
Your work ensures accurate data collection for structural analysis and performance validation-every installation you perform contributes to flight safety and system reliability.
Duties and Responsibilities
  • Perform strain gage installations using Wheatstone bridge wiring methodology on aircraft and facility components.
  • Execute surface preparation, measurement, layout, alignment, and bonding of strain gages to specification.
  • Install and configure measurement systems and instrumentation wiring for data collection.
  • Measure and document strain data for Torque, Axial Load, Bending, and Shear applications.
  • Demonstrate proficiency with Micro-Measurements techniques and procedures.
  • Support extended and modified shift requirements, including overtime as needed.
  • Maintain detailed documentation of all installations and test procedures.
  • Collaborate with engineering teams to ensure measurement accuracy and system integrity.

Required Experience/Skills
  • Minimum 5 years of hands-on experience with strain gage installation and measurement systems.
  • Proficiency in Wheatstone bridge wiring methodology and instrumentation wiring.
  • Demonstrated ability to work with surface preparation, measurement, layout, alignment, and bonding techniques.
  • Experience applying strain gages to both metallic and composite aircraft/facility components.
  • Knowledge of measurement systems, data documentation, and technical specifications.
  • Ability to read and interpret engineering drawings and test procedures.
  • Strong attention to detail and precision in technical work.
  • Flexibility to support overtime and modified shift schedules.

Nice-to-Haves
  • Fluency and hands-on experience with Micro-Measurements techniques and proprietary procedures.
  • Experience in aerospace or defense test operations.
  • Familiarity with flight test environments and ground test facilities.
  • Experience with data acquisition systems and instrumentation integration.

Education
  • Equivalent of 4 years high school and 2 years engineering college or technical school.
  • Technical certifications in instrumentation or related fields are a plus.

Pay & Benefits Summary
  • Hourly Rate: $20.00 - $68.00/hour (OT40)

Call-to-Action
Ready to contribute to cutting-edge aerospace engineering? Apply now and become part of a team driving innovation in advanced flight test operations. Submit your resume and we'll be in touch within 24 hours.
Keywords: Strain Gage Installation | Wheatstone Bridge | Aerospace Testing | Instrumentation | Aircraft Components | Flight Test | Ground Test | Measurement Systems | Composite Materials | Engineering Technician

Apply