ZipRecruiter

Log In

1

Smt Setup Operator Jobs (NOW HIRING)

TekSky

SMT Operator

West Melbourne, FL · On-site

$15.25 - $20.50/hr

SMT Line Setup & Operation** - Execute complete line setups and changeovers, including solder paste printers, pick-and-place machines (e.g., Yamaha, Fuji, Juki, ASM, or equivalent), and reflow ovens ...

Adtran

SMT Operator Sr.

Huntsville, AL · On-site

$16.25 - $21.75/hr

Position Summary The Senior SMT Operator is responsible for the setup, operation, troubleshooting, optimization, and support of Surface Mount Technology (SMT) production equipment used in the ...

Ducommun, Inc.

SMT Operator 1

Huntsville, AR · On-site

$15.25 - $20.25/hr

Perform setup and tear down on all feeders for all pick and place machines * Assist the operator in setting up and running all pick and place machines * Perform manual placement of SMT and PIH ...

InCube Labs

SMT Operator

Milpitas, CA · On-site

$20.50 - $27/hr

Setup and operation of surface mount pick and place machines * Setup and operation of stencil printers * Setup and operation of mass reflow ovens * Properly setup all equipment on the SMT, including ...

Ducommun

SMT Operator 1

Huntsville, AR · On-site

$15.25 - $20.25/hr

Perform setup and tear down on all feeders for all pick and place machines * Assist the operator in setting up and running all pick and place machines * Perform manual placement of SMT and PIH ...

Ducommun

SMT Operator 1

Huntsville, AR · On-site

$15.25 - $20.25/hr

Perform setup and tear down on all feeders for all pick and place machines * Assist the operator in setting up and running all pick and place machines * Perform manual placement of SMT and PIH ...

Hyve Solutions

SMT Operator II

Nevada, IA · On-site

$16.50 - $21.75/hr

SMT Operator Level I, II, III Job Responsibilities: * Learn, understand and follow company ... Monitor consumables for SMT lines and setup. * Work in conjunction with Stockroom, Engineering ...

Adecco

SMT Operator

Nampa, ID

$20 - $30/hr

Adecco is currently hiring experienced SMT Operators to support printed circuit board assembly ... Read and interpret setup sheets, work instructions, assembly drawings, and production documentation.

Hyve Solutions

SMT Operator II

Nevada, IA · On-site

$16.50 - $21.75/hr

SMT Operator Level I, II, III Job Responsibilities: * Learn, understand and follow company ... Monitor consumables for SMT lines and setup. * Work in conjunction with Stockroom, Engineering ...

Boseallaboutme

Surface Mount (SMT) Operator

Binghamton, NY · On-site

$17.02 - $23.37/hr

The Surface Mount Operator II is responsible for the setup, operation, and monitoring of surface mount technology (SMT) equipment used in the assembly of printed circuit boards. This role requires a ...

Hyve Solutions

SMT Operator II

Nevada, IA · On-site

$16.50 - $21.75/hr

SMT Operator Level I, II, III Job Responsibilities: * Learn, understand and follow company ... Monitor consumables for SMT lines and setup. * Work in conjunction with Stockroom, Engineering ...

Adecco

SMT Operator

Nampa, ID

$20 - $30/hr

Adecco is currently hiring experienced SMT Operators to support printed circuit board assembly ... Read and interpret setup sheets, work instructions, assembly drawings, and production documentation.

Hyve Solutions

SMT Operator I

Nevada, IA · On-site

$39K - $40K/yr

SMT Operator Level I, II, III Job Responsibilities: * Learn, understand and follow company ... Monitor consumables for SMT lines and setup. * Work in conjunction with Stockroom, Engineering ...

Beneficial Talent Source

SMT Machine Operator

Batavia, OH · On-site

$16.25 - $20/hr

Job Title Electromechanical Equipment Operator / SMT Machine Operator Position Summary This ... The role involves machine setup, production monitoring, troubleshooting support, and maintaining ...

Acara Solutions

SMT Operator

Melbourne, FL

$19 - $22/hr

SMT Operator I Location: Melbourne, FL Employment Type: Temp to Direct Industry: Electronic ... setup, debugging, and operator training support * Follow written and verbal instructions while ...

Hubbell

SMT Machine Operator

Westbury, NY · On-site

$18.50 - $22.50/hr

Job Overview The SMT (Surface Mount Technology) operator is responsible for the setup, operation, and maintenance of SMT production equipmen t to ensure efficient, high-quality electronic assembly.

MICROBOARD PROCESSING INC

SMT Operator I

Seymour, CT · On-site

$17.50 - $23.25/hr

SMT OPERATOR I Description: Operate screen printer, paste inspection, pick and place, and reflow ... Works in conjunction with group leader, setup person, and parts coordinator in the setup and ...

previous page

Showing results 41-60

All JobsManufacturing JobsProduct Manufacturing JobsProduction Machine Operator JobsSmt Setup Operator Jobs

Smt Setup Operator information

See salary details

$14

$20

$26

How much do smt setup operator jobs pay per hour?

As of Sep 11, 2026, the average hourly pay for smt setup operator in the United States is $20.23, according to ZipRecruiter salary data. Most workers in this role earn between $16.83 and $22.36 per hour, depending on experience, location, and employer.

What is the difference between Smt Setup Operator vs Soldering Technician?

AspectSmt Setup OperatorSoldering Technician
CredentialsTypically requires technical diploma or certification in electronics manufacturingOften requires soldering certifications or technical training in electronics
Work EnvironmentWorks in SMT assembly lines, setting up and adjusting machinesWorks in electronics repair or manufacturing, focusing on soldering components
Industry UsageCommon in PCB assembly and electronics manufacturingCommon in electronics repair, assembly, and manufacturing

The Smt Setup Operator primarily focuses on preparing and configuring SMT machines for PCB assembly, while the Soldering Technician specializes in manually soldering components onto circuit boards. Both roles require technical skills and certifications related to electronics, but their daily tasks and work environments differ significantly.

Is a Smt Setup Operator a good job?

A Smt Setup Operator is responsible for preparing and setting up surface-mount technology equipment for electronic manufacturing, requiring technical skills and attention to detail. The role often offers steady employment, opportunities for skill development, and may involve shift work in manufacturing environments. Job satisfaction depends on individual interests in electronics and manufacturing processes.

What does an Smt Setup Operator do?

An SMT Setup Operator prepares and configures surface-mount technology (SMT) equipment for electronic assembly. They set up machines, load components, and ensure proper calibration to facilitate efficient and accurate manufacturing processes. Attention to detail and familiarity with soldering, inspection, and quality standards are essential skills for this role.

What cities are hiring for Smt Setup Operator jobs?

Cities with the most Smt Setup Operator job openings:

What states have the most Smt Setup Operator jobs?

States with the most job openings for Smt Setup Operator jobs include:

What are popular job titles related to Smt Setup Operator jobs?

For Smt Setup Operator jobs, the most frequently searched job titles are:

Infographic showing various Smt Setup Operator job openings in the United States as of September 2026, with employment types broken down into 47% Full Time, 51% Part Time, 1% Contract, and 1% Nights. Highlights an 99% Physical, and 1% Remote job distribution, with an average salary of $42,087 per year, or $20.2 per hour.

SMT Operator

West Melbourne, FL • On-site

TekSky
IT Services • 11 - 50 employees
Learn more about TekSkyexternal

$15.25 - $20.50/hr

Full-time

Re-posted yesterday

Job description

Key Responsibilities**
**SMT Line Setup & Operation**
- Execute complete line setups and changeovers, including solder paste printers, pick-and-place machines (e.g., Yamaha, Fuji, Juki, ASM, or equivalent), and reflow ovens.
- Load, verify, and validate feeders according to setup sheets and BOM requirements.
- Confirm correct component polarity, orientation, and package types.
- Validate machine programs and placement accuracy.
- Perform and inspect first-article builds to ensure compliance before full production runs.
**Process Control & Optimization**
- Inspect solder paste deposition and fine-tune print parameters (alignment, pressure, speed) as needed.
- Monitor for common placement defects such as tombstoning, skew, insufficient solder, and bridging.
- Review and verify reflow oven profiles and thermal parameters.
- Identify root causes of placement and soldering defects and implement corrective actions.
- Make minor equipment adjustments to optimize quality, minimize downtime, and support ongoing yield improvement efforts.
**Quality & Documentation**
- Conduct in-process inspections in accordance with **IPC-A-610** standards.
- Maintain lot traceability and proper material handling controls.
- Document nonconformances, root causes, and resolutions; escalate issues promptly when required.
- Adhere to ESD protocols and safe component handling practices.
- Accurately record production data in ERP/MES systems.
**Maintenance & Troubleshooting**
- Perform routine preventive maintenance on SMT equipment.
- Replace nozzles, clean stencils, and resolve placement errors or jams.
- Troubleshoot feeder malfunctions, vision system faults, pick errors, and related issues.
- Partner with engineering teams on program refinements and process enhancements.
**Required Qualifications**
- Minimum 3+ years of direct SMT line operation experience in a production setting.
- Hands-on experience with multi-head pick-and-place systems, fine-pitch components, and BGA placement.
- Proficiency placing 0201 (or smaller) components (strongly preferred).
- Ability to read and interpret BOMs, assembly drawings, setup sheets, and work instructions.
- Expertise in feeder setup, verification, and quick changeover techniques.
- In-depth knowledge of common SMT defects, their causes, and corrective/preventive measures.
- Comfort thriving in a fast-paced, high-mix/low-volume manufacturing environment.
**Preferred Qualifications**
- Current **IPC-A-610** certification.
- Familiarity with **IPC-J-STD-001** soldering standards.
- Experience operating AOI (Automated Optical Inspection) systems.
- Knowledge of reflow profiling techniques.
- Background in contract/EMS (electronics manufacturing services) environments.
- Exposure to Lean manufacturing principles, 5S, or continuous improvement methodologies.
**Technical Competencies**
- Solder paste printing optimization and defect analysis.
- Pick-and-place machine calibration, alignment, and program validation.
- Reflow process fundamentals and profile management.
- Accurate component package identification and handling.
- ESD prevention and compliance.
- Strong process troubleshooting and root-cause analysis skills.
**Physical Requirements**
- Ability to stand for prolonged periods.
- Capable of lifting up to 30 lbs.
- Comfortable working in a production manufacturing facility.
Teksky logo

About Teksky

Sourced by ZipRecruiter

Industry

It services and recruiting and staffing services

Company size

11 - 50 Employees

Headquarters location

Sterling, VA, US

View All Teksky Jobs

Apply