ZipRecruiter

Log In

1

Second In Pilot Jobs in Orlando, FL (NOW HIRING)

JETecnology Solutions

CNC Operator 2nd Shift

Apopka, FL · On-site

$18 - $24.50/hr

Manufacture fixtures and assist in pilot run program prove-outs, communicating results with the ... Perform other related duties as assigned by Manager. * 2nd Shift: 3:00PM to 11:30PM Requirements ...

JE Technology Solutions Inc

CNC Operator 2nd Shift

Apopka, FL · On-site

$18 - $24.50/hr

Manufacture fixtures and assist in pilot run program prove-outs, communicating results with the ... Perform other related duties as assigned by Manager. * 2nd Shift: 3:00PM to 11:30PM Requirements ...

National Airlines

First Officer

Orlando, FL · On-site

Chief Pilot FLSA Status: Exempt Summary: National First Officers, also known as second-in-command (SIC), report to the Chief Pilot and are functionally responsible to the Pilot in Command (PIC) of ...

National Air Cargo, Inc

First Officer

Orlando, FL · On-site

Chief Pilot FLSA Status: Exempt Summary: National First Officers, also known as second-in-command (SIC), report to the Chief Pilot and are functionally responsible to the Pilot in Command (PIC) of ...

National Air Cargo, Inc

Captain 777

Orlando, FL · On-site

Have a minimum of 1000 hours of pilot-in-command (PIC) time or second in command (SIC) to qualify per FAR 121.436. (Hours must be obtained under Title 14 of the United States Code of Federal ...

National Airlines

Captain 777

Orlando, FL · On-site

Have a minimum of 1000 hours of pilot-in-command (PIC) time or second in command (SIC) to qualify per FAR 121.436. (Hours must be obtained under Title 14 of the United States Code of Federal ...

National Air Cargo Group Inc

Captain 777

Orlando, FL · On-site

Have a minimum of 1000 hours of pilot-in-command (PIC) time or second in command (SIC) to qualify per FAR 121.436. (Hours must be obtained under Title 14 of the United States Code of Federal ...

JETecnology Solutions

CNC Machinist 2nd Shift

Apopka, FL · On-site

$17.50 - $23.25/hr

Inspection & Quality • Perform First Article Inspections, in-process inspections, 100 ... leadership, and pilot run program prove-outs by troubleshooting machining challenges and ...

JE Technology Solutions Inc

CNC Machinist 2nd Shift

Apopka, FL · On-site

$17.50 - $23.25/hr

Inspection & Quality Perform First Article Inspections, in-process inspections, 100% inspections on ... Support engineering, manufacturing leadership, and pilot run program prove-outs by troubleshooting ...

U.S. Navy

Aviation Officer

Orlando, FL · On-site

  • Medical

  • Retirement

  • PTO

... in the world -- second only to the U.S. Air Force. Below are the careers in aviation that work together to get our birds in the sky. AVIATION JOBS IN THE NAVY FIGHTER PILOT - Complete complex air ...

BNY

Senior Specialist, Process Audit

Lake Mary, FL

$70K - $87K/yr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Review second line testing, continuous monitoring, and issue validation for surveillance controls ... experienced in accelerating analytics adoption within audit/compliance through targeted pilots ...

JE Technology Solutions Inc

CNC Machinist 1st Shift

Apopka, FL · On-site

$18 - $24.50/hr

Inspection & Quality Perform First Article Inspections, in-process inspections, 100% inspections on ... Support engineering, manufacturing leadership, and pilot run program prove-outs by troubleshooting ...

JETecnology Solutions

CNC Machinist 1st Shift

Apopka, FL · On-site

$18 - $24.50/hr

Inspection & Quality • Perform First Article Inspections, in-process inspections, 100 ... Job Type: Full-time; Non Exempt Shift: 1st and 2nd shift availability Work Schedule: Minimum 40 ...

next page

Showing results 1-20

All JobsSecond In Pilot JobsSecond In Pilot Jobs in Orlando, FL

Second In Pilot information

See Orlando, FL salary details

$46.2K

$122.2K

$187.6K

How much do second in pilot jobs pay per year?

As of Aug 18, 2026, the average yearly pay for second in pilot in Orlando, FL is $122,213.00, according to ZipRecruiter salary data. Most workers in this role earn between $93,400.00 and $144,700.00 per year, depending on experience, location, and employer.

What is a second in pilot?

A Second In Pilot, often referred to as a First Officer or Co-Pilot, is a licensed pilot who assists the Captain (Pilot in Command) in operating an aircraft. They share flying duties, help with navigation, communication, and monitoring aircraft systems. Second In Pilots are essential for ensuring flight safety, supporting the Captain, and stepping in to take control if necessary. They also play a significant role in pre-flight checks, emergency procedures, and communicating with air traffic control.

What skills and qualifications are needed to thrive as a second in pilot?

To excel as a Second In Pilot (First Officer), you need a valid commercial pilot license, strong aeronautical knowledge, and experience with flight operations. Familiarity with flight management systems (FMS), aircraft-specific avionics, and regulatory compliance tools is typically required, along with certifications such as an Airline Transport Pilot License (ATPL). Excellent communication, teamwork, and decision-making skills help you coordinate effectively with the captain and crew, especially under pressure. These competencies are crucial for ensuring flight safety, regulatory adherence, and smooth operation of commercial flights.

What are common challenges faced by a second in pilot, and how can they be addressed?

Second In Pilots often face challenges such as adapting to varying flight schedules, maintaining situational awareness under pressure, and efficiently communicating with the Captain and crew. It's essential to stay up-to-date with standard operating procedures and regularly participate in simulator training to sharpen decision-making skills. Building strong teamwork and clear communication habits with other crew members also helps address these challenges and supports safe, efficient flight operations.

What is the difference between Second In Pilot vs First Officer?

AspectSecond In PilotFirst Officer
CertificationsCommercial Pilot License (CPL), Second In Pilot certificationCommercial Pilot License (CPL), First Officer certification
Work EnvironmentAssists the Captain, operates as part of the flight crewShares flying duties, supports the Captain
Role in FlightSupports the Captain, may handle specific flight segmentsPrimary pilot during flight, responsible for navigation and safety

The Second In Pilot and First Officer roles are both essential flight crew positions requiring similar certifications. The Second In Pilot typically assists the Captain and may operate specific flight segments, while the First Officer is the primary pilot during flight, sharing flying duties and decision-making responsibilities. Both roles work closely within the cockpit, but the First Officer often has more flying authority and experience.

What is a good second career for a second in pilot?

A second in pilot can transition to careers such as airline captain, flight instructor, or corporate pilot, leveraging their flying experience and knowledge of aviation regulations. Skills in navigation, safety procedures, and communication are valuable in roles like aviation safety inspector or aircraft maintenance supervisor. Additional certifications or ratings may be required for some positions.

What cities near Orlando, FL are hiring for Second In Pilot jobs?

Cities near Orlando, FL with the most Second In Pilot job openings:

Second In Pilot jobs near you
Infographic showing various Second In Pilot job openings in Orlando, FL as of August 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution, with an average salary of $122,213 per year, or $58.8 per hour.

CNC Operator 2nd Shift

JETecnology Solutions

Apopka, FL • On-site

$18 - $24.50/hr

Full-time

Posted 29 days ago

Job description

Job Type
Full-time
Description
The CNC Operator is responsible for programming, setting up, and operating CNC machines to produce precision components according to engineering drawings and specifications. This role requires advanced knowledge of CNC programming, machining processes, and quality inspection standards. The CNC Operator ensures parts meet exact tolerances, performs program optimizations, conducts inspections, and supports continuous improvement initiatives. The role also requires collaborating with the manufacturing team, and maintaining compliance with ISO quality standards and safety protocols.
Key Responsibilities:
  • Perform CAM programming for CNC machinery.
  • Manufacture parts from drawings, including material take-offs, tooling selection, machine setups, operation of CNC machinery, program optimization, and part inspection.
  • Perform in-process and First Article Inspections (FAI).
  • Apply expertise in Fanuc Controls, G & M code, hand program edits, and program merging.
  • Perform tool offset adjustments for wear and nominal part dimensions.
  • Apply Lean Manufacturing and Continuous Improvement concepts, including setup reduction, fixture/tooling productivity improvements, and program efficiency enhancements.
  • Utilize Renishaw probes, including manual probe programming using probe macros.
  • Lead other machinists by training, mentoring, and directing the activities of junior machinists.
  • Manage multiple machines simultaneously and/or oversee other machining operations.
  • Create accurate setup sheet information for efficient production.
  • Manufacture fixtures and assist in pilot run program prove-outs, communicating results with the Manufacturing Manager.
  • Perform 100% inspection of new parts to ensure quality standards.
  • Assist with cutting tool selection, upgrades, and testing of new tooling.
  • Interpret detail drawings with a strong understanding of GD&T, true position, and datum structures.
  • Ensure adherence to ISO Quality Systems standards and processes.
  • Apply advanced trigonometry and geometry to solve machining challenges.
  • Maintain a clean, organized, and safe work environment.
  • Collaborate with team members and supervisors to achieve production targets.
  • Perform other related duties as assigned by Manager.
  • 2nd Shift: 3:00PM to 11:30PM

Requirements
Qualifications & Experience:
  • High school diploma or equivalent required; technical certification or associate degree in
  • Machining, Manufacturing Technology, or related field preferred.
  • Minimum of 5 years of CNC machining and programming experience, with demonstrated proficiency in Fanuc controls.
  • Strong background in CAM programming and CNC setup/operation.
  • Experience working within ISO quality environments.
  • Previous leadership or mentoring experience preferred.
  • Demonstrated ability to run complex parts to tight tolerances.

Work Location: Onsite. Apopka, FL - Reliable commute to work is required.
Job Type: Full-time
Work Schedule: 2nd Shift. Minimum 40 hours weekly, with willingness to work additional hours as needed to meet project deadlines. Standard workweek is Monday through Friday.
JE Technology Solutions, Inc. maintains a drug-free workplace. All offers of employment are contingent upon successful completion of a drug screening within two business days of offer acceptance and a background check conducted in accordance with company policy.
Upon hire, JE Technology Solutions, Inc. uses E-Verify to confirm employment eligibility for all positions based in the United States.
JE Technology Solutions, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by applicable law.

Apply