ZipRecruiter

Log In

1

Root Cause Analysis Engineer Jobs in Florida (NOW HIRING)

MC Test Service Inc

Test Engineer

Melbourne, FL · On-site

Root cause analysis and corrective action * Test automation and programming * Data analysis and statistical problem solving * Project management * Continuous improvement methodologies * Product and ...

L3HHCM20

Senior Associate, Test Engineer

Orlando, FL · On-site

... root cause analysis, and mistake proof planning Provide production floor support for test teams as needed Train in both company processes, launch vehicle systems and related test engineering tasks ...

V2X

Life Cycle Engineer III

Orlando, FL · On-site

Failure Modes and Effects Analysis (FMEA) and Root Cause Analysis (RCA) * Provisioning and sparing ... Support systems engineering life cycle activities, including configuration management and ...

Vectrus Corporate

Life Cycle Engineer III

Orlando, FL · On-site

Failure Modes and Effects Analysis (FMEA) and Root Cause Analysis (RCA) * Provisioning and sparing ... Support systems engineering life cycle activities, including configuration management and ...

V2X

Life Cycle Engineer III

Orlando, FL · On-site

Failure Modes and Effects Analysis (FMEA) and Root Cause Analysis (RCA) * Provisioning and sparing ... Support systems engineering life cycle activities, including configuration management and ...

W3Global Inc.

Mechanical Engineer

Ormond Beach, FL

$65K - $70K/yr

Perform root cause analysis to troubleshoot mechanical failures and optimize system performance. * Create and manage project schedules to ensure timely completion of engineering tasks and ...

Stryker Corporation

Optical Coatings Engineer

Sarasota, FL · On-site

$90 - $130/hr

Optical Coatings Engineer Job Type: Full-Time Experience Level: All Experience Levels About the ... Perform root-cause analysis and recommend improvements to coating designs and processes * Stay ...

New

previous pagenext page

Showing results 21-40

All JobsRoot Cause Analysis Engineer JobsRoot Cause Analysis Engineer Jobs in Florida

Root Cause Analysis Engineer information

See Florida salary details

$9

$41

$60

How much do root cause analysis engineer jobs pay per hour?

As of Aug 20, 2026, the average hourly pay for root cause analysis engineer in Florida is $41.84, according to ZipRecruiter salary data. Most workers in this role earn between $30.00 and $55.67 per hour, depending on experience, location, and employer.

What does a root cause analysis engineer do?

A Root Cause Analysis (RCA) Engineer specializes in investigating problems, failures, or defects in products, systems, or processes to identify their underlying causes. By using structured methodologies and analytical tools, they determine why issues occurred and recommend corrective actions to prevent recurrence. Their work often involves collaborating with cross-functional teams, collecting and analyzing data, and documenting findings to improve overall quality and reliability. Root Cause Analysis Engineers play a crucial role in industries such as manufacturing, engineering, and IT, ensuring continuous improvement and operational excellence.

What are the key skills and qualifications needed to thrive as a root cause analysis engineer?

To thrive as a Root Cause Analysis Engineer, you need strong analytical skills, a solid engineering background, and experience with problem-solving methodologies like Six Sigma or 8D. Familiarity with technical tools such as statistical analysis software, failure mode and effects analysis (FMEA), and quality management systems is typically required, along with relevant certifications like Six Sigma Green or Black Belt. Effective communication, attention to detail, and cross-functional collaboration are vital soft skills for conveying findings and driving corrective actions. These abilities ensure accurate diagnosis of issues, effective implementation of solutions, and prevention of recurring problems in complex systems.

What are some common challenges faced by root cause analysis engineers, and how can they be addressed?

Root Cause Analysis Engineers often encounter challenges such as incomplete data, time constraints for investigations, and coordinating input from multiple departments. Addressing these issues requires strong communication skills, a systematic approach to data collection, and the ability to facilitate cross-functional meetings. Building strong relationships with stakeholders and using established RCA tools (like 5 Whys or Fishbone diagrams) can help streamline the process and lead to more accurate, actionable conclusions.

What is the difference between Root Cause Analysis Engineer vs Quality Engineer?

AspectRoot Cause Analysis EngineerQuality Engineer
CredentialsBachelor's in Engineering, certifications like Six Sigma or RCA toolsBachelor's in Engineering or Quality Management, certifications like ASQ CQE or Six Sigma
Work EnvironmentManufacturing, industrial, or process improvement settingsManufacturing, service, or product development environments
Industry UsageFocuses on identifying underlying causes of failures or defectsFocuses on ensuring product/service quality and compliance

While both roles aim to improve processes, the Root Cause Analysis Engineer specializes in diagnosing fundamental issues causing failures, whereas the Quality Engineer concentrates on maintaining overall product quality and compliance. The roles often overlap but differ in primary focus and scope.

What are popular job titles related to Root Cause Analysis Engineer jobs in Florida?

For Root Cause Analysis Engineer jobs in Florida, the most frequently searched job titles are:

What job categories do people searching Root Cause Analysis Engineer jobs in Florida look for?

The top searched job categories for Root Cause Analysis Engineer jobs in Florida are:

What cities in Florida are hiring for Root Cause Analysis Engineer jobs?

Cities in Florida with the most Root Cause Analysis Engineer job openings:

Root Cause Analysis Engineer jobs near you
Infographic showing various Root Cause Analysis Engineer job openings in Florida as of August 2026, with employment types broken down into 84% Full Time, 13% Part Time, and 3% Contract. Highlights an 81% Physical, 5% Hybrid, and 14% Remote job distribution, with an average salary of $87,032 per year, or $41.8 per hour.

Test Engineer

MC Test Service Inc

Melbourne, FL • On-site

Full-time

Medical, Life, Retirement, PTO

Re-posted 25 days ago

Job description

SMTC is hiring for a Test Engineer in Melbourne, FL!


SMTC Corporation was founded in 1985. SMTC is a mid-size provider of end-to-end electronics manufacturing services (EMS) including PCBA production, systems integration and comprehensive testing services, enclosure fabrication, as well as product design, sustaining engineering and supply chain management services. Services extend over the entire electronic product life cycle from the development and introduction of new products through to the growth, maturity and end-of-life phases.


Benefits Highlights:

*401K with company match

*PTO, Paid Holidays

*Tuition Reimbursement

*Medical HRA Plan

*Short term/Long term Disability Insurance, etc.


Summary:

The Test Engineer is responsible for the development, implementation, validation, and continuous improvement of manufacturing test solutions used to support electronic assemblies, subassemblies, and finished products throughout the product lifecycle. This role serves as a technical resource for production operations and customers, supporting test strategy development, troubleshooting, process optimization, and manufacturing readiness activities.

The Test Engineer independently develops and maintains functional test, in-circuit test (ICT), flying probe, environmental, and automated test solutions while partnering with Engineering, Manufacturing, Quality, and Operations teams to improve product quality, test coverage, reliability, and operational performance. This position plays a critical role in supporting New Product Introduction (NPI), yield improvement, root cause analysis, and continuous improvement initiatives within a high-reliability electronics manufacturing environment.

Essential Functions:

  • Design, develop, validate, maintain, and support functional test, in-circuit test (ICT), flying probe, environmental, and automated test solutions for manufacturing operations.
  • Review customer specifications, engineering requirements, schematics, and product documentation to develop effective test strategies and manufacturing test solutions.
  • Lead the development, procurement, installation, qualification, validation, and maintenance of test fixtures, hardware, software, and associated support systems.
  • Develop and maintain test procedures, validation plans, engineering documentation, work instructions, technical reports, and related records.
  • Support New Product Introduction (NPI) activities by developing test strategies, validation plans, and manufacturing readiness requirements.
  • Analyze test data, yield trends, defect trends, and product performance metrics to identify opportunities for quality, reliability, and operational improvements.
  • Investigate product failures, test escapes, equipment issues, and manufacturing concerns utilizing structured troubleshooting and root cause analysis methodologies.
  • Develop, implement, and verify corrective and preventive actions to improve test effectiveness, product quality, and manufacturing performance.
  • Support implementation of Product Change Notices (PCNs), Engineering Change Notices (ECNs), customer-driven product modifications, and related validation activities.
  • Collaborate with customers, suppliers, Engineering, Manufacturing, Quality, and Operations teams to resolve technical issues and support program objectives.
  • Provide technical training, guidance, and support to Test Engineering Technicians, Test Operators, and manufacturing personnel regarding test equipment, troubleshooting, and testing methodologies.
  • Support continuous improvement initiatives, engineering projects, and laboratory activities focused on yield improvement, quality enhancement, equipment optimization, reliability, efficiency, and cost reduction.

Leadership Responsibilities:

  • Serve as a technical resource for Test Engineering, Manufacturing, Quality, and Operations teams.
  • Lead technical problem-solving activities and support cross-functional improvement initiatives.
  • Provide technical guidance and mentorship to Junior Test Engineers, Test Technicians, and Operators.
  • Promote engineering best practices, standardized methodologies, and continuous improvement principles.
  • Demonstrate accountability for project execution, technical decisions, and customer support activities.

Competencies:

  • Test system development and validation
  • Electronics troubleshooting and diagnostics
  • Root cause analysis and corrective action
  • Test automation and programming
  • Data analysis and statistical problem solving
  • Project management
  • Continuous improvement methodologies
  • Product and process validation
  • Technical leadership and influence
  • Cross-functional collaboration
  • Customer relationship management
  • Written and verbal communication
  • Critical thinking and decision making
  • Organization and prioritization


Qualifications:

  • Education: Bachelor's Degree in Electrical Engineering, Computer Engineering, Electronics Engineering, or related STEM discipline required.
  • Certifications:
    • IPC-A-610 Certification preferred.
    • IPC J-STD-001 Certification preferred.
    • Certified LabVIEW Associate Developer (CLAD) preferred.
    • Six Sigma Green Belt preferred.

Experience:

  • Minimum of three (3) years of engineering experience supporting test development, manufacturing engineering, electronics manufacturing, or related technical environments.
  • Experience developing, implementing, and supporting functional test, in-circuit test (ICT), flying probe, environmental, or automated test solutions.
  • Strong understanding of electronic theory, circuit analysis, and troubleshooting methodologies.
  • Experience interpreting schematics, wiring diagrams, assembly drawings, and engineering documentation.
  • Experience performing root cause analysis, failure investigations, and corrective action implementation.
  • Experience supporting New Product Introduction (NPI), manufacturing readiness, and product validation activities.
  • Proficiency with electronic test equipment including oscilloscopes, digital multimeters, power supplies, logic analyzers, and automated test equipment.
  • Experience with programming, scripting, or test automation tools such as Python, LabVIEW, SQL, C++, or similar technologies preferred.
  • Experience within electronics manufacturing, contract manufacturing, aerospace, defense, medical device, or other regulated industries preferred.
  • Must qualify as an ITAR-compliant U.S. Person.

Physical Requirements:

  • Prolonged periods of sitting, standing, and computer work.
  • Frequent use of electronic test equipment, computers, and engineering tools.
  • Ability to inspect electronic assemblies, test fixtures, and manufacturing processes.
  • Frequent movement throughout office, laboratory, and manufacturing environments.
  • Ability to occasionally lift and/or move materials, equipment, or fixtures weighing up to 25 pounds.
  • Ability to communicate effectively with employees, customers, and suppliers.


Mental Requirements:

  • Ability to analyze technical problems and develop effective solutions.
  • Ability to interpret engineering specifications, schematics, and technical documentation.
  • Ability to manage multiple projects, assignments, and deadlines simultaneously.
  • Ability to perform root cause analysis and data-driven decision-making.
  • Ability to learn new technologies, software platforms, and engineering methodologies.
  • Ability to exercise sound judgment and independent thinking.
  • Ability to adapt to changing business priorities and customer requirements.


Work Environment:

  • Work is performed in a combination of professional office, electronics manufacturing, remote, and travel-based environments. Responsibilities may require regular interaction with production areas, exposing employees to moderate noise levels, fluctuating temperatures, production equipment, soldering operations, automated machinery, and general manufacturing activity. Duties may involve extended periods of sitting, standing, walking, bending, computer-based work, and occasional lifting or movement of materials consistent with job responsibilities. Employees entering production or controlled areas are required to follow all environmental, safety, ESD, quality, and equipment-handling procedures, including the use of SMTC-provided ESD-safe items where applicable. The role also requires travel between company locations, customer sites, or other business-related destinations as needed, as well as the ability to maintain a safe and secure remote workspace with reliable internet access when working remotely. Employees must remain attentive and compliant with all operational, safety, quality, confidentiality, and company policy requirements across all work environments.

Travel: 0-10% of the time based on business needs.

Please note this job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

SMTC is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information or other protected status.

If you require assistance completing this application due to a disability, please contact Human Resources to ask for an accommodation or an alternative application process.