ZipRecruiter

Log In

1

Rack Stack Jobs in Gilbert, AZ (NOW HIRING)

Spectraforce Technologies

L4 IFA Tech AZ

Chandler, AZ · On-site

$24 - $31/hr

Candidate will be participating in Hardware Rack & Stack installation of both Network and Server equipment, cable management, and installation of required Fiber and Copper Patch leads, providing ...

Aspen Technologies and Electric

Be Seen First

Fiber and Low Voltage Technician

Tempe, AZ · On-site

$17 - $40/hr

Familiar with rack & stack, rack deliveries, power distribution, and pre-cabling best practices Additional Technical Responsibilities & Capabilities * Full structured cabling & hyperscale fiber-optic ...

Allegiance Staffing

Reach Truck Driver

Phoenix, AZ

$19/hr

Move, stack, and organize pallets in racking * Load, unload, and stage product * Assist with general warehouse tasks as needed Requirements: * 4-5 years of reach truck experience preferred * Must be ...

ASD, Inc.

Material Handler 1 with Security Clearance

Mesa, AZ · On-site

$16.50 - $20/hr

Loads and unloads materials onto or from pallets, trays, racks, conveyors, and machines by hand ... Conveys materials using, hand truck, forklift, or other devices; stacks or assembles materials ...

Prolim Global

Material Handler 2

Mesa, AZ · On-site

$16.50 - $20/hr

Loads and unloads materials onto or from pallets, trays, racks, conveyors, and machines by hand ... Conveys materials using, hand truck, forklift, or other devices; stacks or assembles materials ...

Prolim Global

Warehouse- Material Handler 2

Mesa, AZ · On-site

$16.50 - $20/hr

Loads and unloads materials onto or from pallets, trays, racks, conveyors, and machines by hand ... Conveys materials using, hand truck, forklift, or other devices; stacks or assembles materials ...

Fluidstack

Lab Technician, Fluidstack Labs

Glendale, AZ · On-site

$152K - $178K/yr

Own the lab floor: rack-and-stack execution, structured copper and fiber cabling, hardware installs and swaps, and part replacement on first-sample compute, network, and storage platforms, keeping ...

next page

Showing results 1-20

All JobsRack Stack JobsRack Stack Jobs in Gilbert, AZ

Rack Stack information

See Gilbert, AZ salary details

$44.4K

$134.3K

$189.9K

How much do rack stack jobs pay per year?

As of Aug 16, 2026, the average yearly pay for rack stack in Gilbert, AZ is $134,340.00, according to ZipRecruiter salary data. Most workers in this role earn between $110,600.00 and $157,500.00 per year, depending on experience, location, and employer.

What are some typical challenges faced by a rack stack technician in a data center environment?

A Rack Stack technician often manages multiple priorities, such as installing new hardware, troubleshooting physical connections, and ensuring proper cable management in tight or busy rack spaces. Adhering to precise documentation and labeling standards is crucial for maintaining system organization and ease of future maintenance. Technicians may encounter time-sensitive situations when supporting rapid server deployments or upgrades, especially during peak infrastructure changes. These challenges require adaptability, attention to detail, and effective communication with IT engineers and network administrators to ensure smooth operation and minimal disruption.

What is a rack stack?

A Rack Stack job involves installing, organizing, and securing server racks in data centers or IT environments. Technicians are responsible for mounting hardware, ensuring proper cable management, and maintaining airflow for optimal performance. This role requires physical labor, attention to detail, and knowledge of networking equipment. Rack stack professionals often work closely with engineers to ensure efficient deployments and maintenance.

What are the key skills and qualifications needed to thrive in the rack stack position?

To thrive as a Rack Stack, you need a solid understanding of data center operations, basic networking, and hardware installation, often supported by experience in IT infrastructure or a relevant technical certification (like CompTIA or Cisco). Familiarity with server rack assembly tools, cable management systems, and asset tracking software is highly beneficial. Strong attention to detail, effective problem-solving skills, and the ability to work collaboratively in a fast-paced environment are key soft skills. These competencies ensure efficient hardware deployments, minimize downtime, and maintain the organization and safety standards critical in data center operations.

What are the most commonly searched types of Rack Stack jobs in Gilbert, AZ?

The most popular types of Rack Stack jobs in Gilbert, AZ are:

What job categories do people searching Rack Stack jobs in Gilbert, AZ look for?

The top searched job categories for Rack Stack jobs in Gilbert, AZ are:

What cities near Gilbert, AZ are hiring for Rack Stack jobs?

Cities near Gilbert, AZ with the most Rack Stack job openings:

Rack Stack jobs near you
Infographic showing various Rack Stack job openings in Gilbert, AZ as of August 2026, with employment types broken down into 1% Internship, 89% Full Time, 4% Part Time, 5% Contract, and 1% Nights. Highlights an 84% Physical, 4% Hybrid, and 12% Remote job distribution, with an average salary of $134,340 per year, or $64.6 per hour.

IFA Technician

Motion Recruitment Partners, LLC

Chandler, AZ • On-site

Other

Posted 13 days ago

Job description

Our client is looking for an IFA Technician for a 2-month contract in Chandler, AZ 85248.
Our client is a multibillion-dollar company that provides end-to-end managed services, technology, and consulting to enable the digital workplace for small to enterprise businesses. Join their team to be part of delivering individualized experiences to a diverse range of clients in a collaborative and productive workplace environment.
Contract Duration: 2 Months
Required Skills & Experience
  • Associate or Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider over three years of progressive experience in the specialty in lieu of every year of education.
  • 4-5 years of combined experience in a Site Support Technician and/or Infrastructure Technician role (or similar experience).
  • Data center experience.
  • 3-5 years of experience in racking, stacking, connecting, and providing basic configuration support of networking and/or server hardware.
  • Minimum 4+ years' experience in racking, stacking, connecting, and providing basic configuration support of networking or server devices.
  • Minimum 3-5 years' experience with servers and/or networking data center hardware.
  • Minimum 3-5 years' experience with Windows 10/11 and Windows Server 2019/2022 OS installation and troubleshooting.
  • Knowledge of computer diagnostics and installation, to include hardware/software troubleshooting and networking.
  • Demonstrated experience installing server systems and related components such as networking and storage equipment.
  • Familiarity with the operation and configuration of networking protocols, network card installation, switches, routers, and similar components.
  • Ability to work in a fast-paced environment and offer effective solutions under tight deadlines.
  • Strong problem-solving and root cause analysis skills.
  • Capable of lifting 1U and 2U rack-mounted servers up to 35 pounds and familiar with the use of pallet jacks, lifts, and general data center safety procedures.
  • Rack new servers and un-rack/remove old servers
  • Cable install & De-install / good wire management required
  • May be required to walk/sit/stand/crawl/kneel for extended periods.
  • Ability to climb ladders and work from heights.
  • Effective communication skills with ability to follow written instructions for hardware and software configurations.
  • Ability to work in hot enclosed environments for short time spans required (i.e. data center hot isles)
  • Cleanroom experience (a recommended plus)
Data center Networking competencies:
  • Proven ability to install cable pathways, conveyances (i.e., ladder, trays, support systems)
  • Knowledge of terminology pertaining to installation & service of cabling infrastructure for telecom, data, security, and wireless systems.
  • Mechanical aptitude with the ability to read cable matrix blueprints, mechanical and/or electrical requirement documents.
  • Complete physical cables installations and removal of cable components, TOR (top of rack) switches, pathway systems (cable tray), move equipment, network gear and related communications infrastructure hardware and materials.
Experience in the following:
  • Structured Network Cabling
    • Copper: Cat5, Cat5e, Cat6, Connector Types RJ45
    • Fiber: Multimode, Single Mode, Connector Types - ST, SC, LC
  • WIFI H/W
    • Wireless LAN Controllers
    • Wireless Access Points
  • Networking
    • IP Addressing, Layer 2 VLAN etc.
  • Experienced in Ethernet Switching H/W
    • Chassis, Supervisor, Line Cards, Power Supplies etc.
    • Transceiver Types - SX, LX, SR, LR etc.
  • Cable Troubleshooting Knowledge / Experience (use of similar tools such as)
    • Fluke Testers: Copper - Wire Map, Link Test etc., Fiber - OTDR Testing
      Fluke Aircheck: Wireless Testing
Data center Server/Client competencies:
  • Intermediate experience with Windows 2016/2022 installation and configuration including:
    • Features need to know
    • Roles/features
    • Disk management
    • User administration
    • OS troubleshooting to identify build issues
    • Adding SAN drives/MPIO
    • Network management
  • Intermediate experience with server hardware DL360/380 Gen8, Gen9, Gen10 and BL460 Gen8, Gen9, Gen10
    • experience troubleshooting memory, disk, array controller battery, HBA, FlexLOM issues
    • Raid configuration/ logical drives
    • iLO configuration
  • Servers and C7000 enclosures
    • Onboard Administrator
  • vSphere 6.5/7.0 vCenter experience
  • Microsoft failover cluster knowledge and installation experience
What You Will Be Doing Daily Responsibilities
  • Hardware Rack & Stack installation of both Network and Server equipment, cable management, and installation of required Fiber and Copper Patch leads, providing console access to Remote Team for testing connectivity after installation and configuration.
  • Onsite team maintaining network environment in support of physical touch (Smart Hands) support of incidents and/or requests.
  • Provide Incident & Service Request support by working with remote Level 2/3 teams to assist in resolving outages or providing new services for customers.
  • Maintain a safe work environment with strict inventory control processes.
Network data center physical touch
  • Perform installation and service of low-voltage category cabling, fiber optic cabling, communications cabling, communication equipment, and other various low-voltage-related systems such as Category 5, Enhanced Category 5, Category 6 and 7, and Fiber Optic cabling.
  • Assist with material control to ensure all required materials are available to complete the daily work.
  • Ensure quality and safety guidelines are followed.
  • Ensure ticketed requests are assigned, communicated, and addressed within customer SLA.
  • Perform quality evaluation, diagnose, troubleshoot cabling systems, and perform replacement/repairs as necessary.
  • Provide support in assisting data center teams and data center managers in accomplishing daily infrastructure new landings within SLA.
Server data center physical touch
Data Center Maintenance
  • Proactive walkthrough for failed hardware.
  • Physical audit of supported systems.
  • Proper disposal of hardware and media following Client guidelines.
  • Management of Incident & Request Tickets Assigned to Queues
  • Validate server(s)/task is under our service responsibility
  • Contact customer for information/request downtime etc.
  • Diagnose problem - order parts as required.
  • Repair/replace/configure as required within scope
  • Complete paperwork.
Landings
  • Validate server(s) landing requirements.
  • Contact customer as required for information.
  • Physically land hardware in the correct location.
  • Build to proper configuration requirements per customer provided cut sheet.
  • Request tasks from required groups for additional services.
  • Monitor tasks for completion or problems and escalate to appropriate parties to resolve.
  • Update Asset Tracking System with server name, location, and owner.
  • Complete paperwork
Decoms
  • Validate server is under our service responsibility.
  • Inform customers of decom prior to removal.
  • Request decom tasks from required groups to remove server(s) from their services.
  • Validate that dependent services have been halted.
  • Power off and remove server(s).
  • Dispose of hardware as requested by owner.
Back Up/BAR Support
General responsibilities include:
  • Escalate unresolved issues to Tier 2 or 3 specialist or Client BaR contacts.
  • Coordinate tasks with other company contractors.
  • Physical installation of backup hardware.
  • Install operating system on backup server hardware.
  • Maintain Client required training.
Media Management
  • Eject tapes from tape libraries in accordance with disaster recovery targets.
  • Prepare and ship tapes to offsite storage vendor.
  • Receive tapes from offsite storage vendor.
  • Load tape libraries with tapes for Scratch Pool; new, returned, expired, recalled for on-demand restores.
  • Perform post-tape load processes on tape libraries.
  • Recall tapes from offsite storage vendor.
  • Manage on-site surplus tape inventory.
  • Manage the tape lifecycle using backup and library software, and any third-party tools.
  • Dispose of damaged or EOL tapes in accordance with Client Information Security policies.
  • Monitor and respond to media errors and tape alerts from backup software and tape libraries.

Applicants must be currently authorized to work in the US on a full-time basis now and in the future.

Apply