ZipRecruiter

Log In

1

Qa Qc Coating Inspector Jobs (NOW HIRING)

ArcelorMittal

QA/QC Inspector

Portland, TX · On-site

The QA/QC Inspector plans and performs QA/QC inspections of the plant and material handling equipment as effectively and economically as possible while being consistent with plant policies, practices ...

Quanta Services

QA/QC Inspector

Pahrump, NV

The QA/QC Inspector is responsible for performing quality assurance and quality control inspections for construction and maintenance projects at Summit Line Construction. This role ensures that all ...

HRV Conformance Verification Associates, Inc.

Openings >> Coating Inspector (as needed) Coating Inspector (as needed) Summary Title: Coating ... quality assurance/quality control services worldwide that span the steel, concrete, paint ...

The Kelly Group

QC Powder Coating Inspector

Lafayette, IN · On-site

$20 - $22/hr

The Kelly Group is seeking a QC Powder Coating Inspector for its Lafayette, Indiana, location. Candidates should have strong written and verbal communication skills. One to three years of experience ...

ISC Constructors

QA/QC Inspector

Conesville, OH · On-site

Primary responsibility of the QA/QC Inspector is to inspect all Instrument and Electrical installations to insure they are in accordance with the drawings, client standards and code. * Interact with ...

Reliable Power Inc

Be Seen First

QA QC Inspector

San Jose, CA · On-site

$20 - $25/hr

We are seeking a QA QC Inspector to join our team! You will conduct tests to determine the quality of materials and finished products as well as identify areas of improvement to increase efficiency.

Reliable Power Inc

Be Seen First

QA QC Inspector

San Jose, CA · On-site

$20 - $25/hr

We are seeking a QA QC Inspector to join our team! You will conduct tests to determine the quality of materials and finished products as well as identify areas of improvement to increase efficiency.

POWERRISE

QA-QC Water/Gas Inspector

Philadelphia, PA · On-site

... Control (QA/QC) Inspector to join our team supporting the inspection of natural gas & water ... oConduct coating and cathodic protection inspections, including holiday testing, application ...

Clean Harbors

QA/QC Inspector

La Porte, TX

HPC-Industrial Powered by Clean Harbors is currently seeking a QA/QC Inspector to join their safety conscious team in La Porte, TX. As a QA/QC Inspector, will be responsible for inspecting incoming ...

next page

Showing results 1-20

All JobsQa Qc Coating Inspector Jobs

Qa Qc Coating Inspector information

See salary details

$13

$22

$38

How much do qa qc coating inspector jobs pay per hour?

As of Jul 22, 2026, the average hourly pay for qa qc coating inspector in the United States is $22.83, according to ZipRecruiter salary data. Most workers in this role earn between $17.55 and $25.72 per hour, depending on experience, location, and employer.

What are some typical challenges faced by a QA/QC Coating Inspector on construction projects?

QA/QC Coating Inspectors often encounter challenges such as managing tight project deadlines while ensuring all coating applications meet stringent quality standards. They must also navigate varying site conditions that can affect coating performance, such as humidity and temperature. Effective communication with contractors, applicators, and project managers is essential to resolve discrepancies and maintain compliance with project specifications. Staying up-to-date with industry standards and documenting inspection findings accurately are also crucial aspects of the role.

What is the difference between Qa Qc Coating Inspector vs NACE Coating Inspector?

AspectQa Qc Coating InspectorNACE Coating Inspector
CertificationsTypically API, SSPC, or company-specific certificationsOften NACE CIP certifications
Work EnvironmentIndustrial sites, construction, manufacturing facilitiesCorrosion control, industrial, offshore, and marine environments
Industry UsageOil & gas, infrastructure, manufacturingCorrosion prevention, coating application, inspection

Both roles focus on coating quality and corrosion prevention, with overlapping certifications and work environments. The NACE Coating Inspector often emphasizes corrosion control standards, while Qa Qc Coating Inspectors may have broader quality assurance responsibilities. Understanding these differences helps employers and professionals choose the right certification and career path.

What does a QA QC Coating Inspector do?

A QA QC Coating Inspector is responsible for ensuring that protective coatings applied to surfaces, such as metals or structures, meet specified quality and safety standards. They inspect surface preparation, application processes, and curing of coatings to detect defects or non-compliance with project requirements. These inspectors document findings, perform various tests, and ensure that all work follows industry standards and client specifications. Their work helps prevent corrosion, extend asset life, and maintain safety in industries like oil and gas, construction, and manufacturing.

What are the key skills and qualifications needed to thrive as a QA QC Coating Inspector, and why are they important?

To thrive as a QA QC Coating Inspector, you need a solid understanding of surface preparation, coating application standards, and inspection procedures, often supported by certifications such as NACE or SSPC. Familiarity with tools like dry film thickness gauges, holiday detectors, and inspection reporting software is typically required. Attention to detail, analytical thinking, and effective communication are vital soft skills for identifying defects and ensuring compliance. These skills and qualifications ensure that protective coatings meet industry standards, preventing costly failures and promoting safety.
More about Qa Qc Coating Inspector jobs
What cities are hiring for Qa Qc Coating Inspector jobs? Cities with the most Qa Qc Coating Inspector job openings:
What job categories do people searching Qa Qc Coating Inspector jobs look for? The top searched job categories for Qa Qc Coating Inspector jobs are:
Qa Qc Coating Inspector jobs near you
Infographic showing various Qa Qc Coating Inspector job openings in the United States as of July 2026, with employment types broken down into 92% Full Time, 3% Part Time, 2% Contract, and 3% Nights. Highlights an 97% Physical, 1% Hybrid, and 2% Remote job distribution, with an average salary of $47,496 per year, or $22.8 per hour.
QA/QC Inspector

QA/QC Inspector

Kakivik Asset Management LLC

Odessa, TX • On-site

Full-time

Medical, Dental, Vision, Life, Retirement

Posted 29 days ago

Job description

The QA/QC Inspector is responsible for ensuring that all inspection, testing, and documentation activities meet company, client, and regulatory requirements. This role supports quality assurance and quality control functions across maintenance, construction, and inspection projects, including performing ultrasonic thickness testing (UTT). Must provide documented 40hr classroom and OJT training and pass company Test.
This position will be responsible for driving Kakivik's Mission, Vision, and Values, a crucial part of the strategic plan to drive success. Kakivik Asset Management leads the industry in Safety, Innovation, and Excellence. Kakivik's mission is to provide quality-driven, cost-effective inspection and asset management services to support resource development companies.
Essential Duties & Job Functions:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions
  • Conduct quality inspections on mechanical, structural, and piping systems to verify compliance with applicable codes, standards, and project specifications
  • Perform and document ultrasonic thickness testing (UTT) after completing required company UTT testing.
  • Interpret and evaluate inspection results, identify deficiencies, and recommend corrective actions
  • Verify materials, welds, coatings, and installations meet quality standards and client requirements
  • Review and maintain inspection reports, QA/QC documentation, and turnover packages
  • Ensure compliance with applicable industry standards (API, ASME, AWS, etc.)
  • Coordinate with field personnel, supervisors, and clients to resolve quality issues
  • Witness and document testing activities (pressure testing, coating inspections, etc.)
  • Maintain calibration and proper use of inspection and testing equipment

Knowledge, Skills, and Abilities:
  • Knowledge of nondestructive testing (NDT) methods, specifically ultrasonic testing principles
  • Familiarity with applicable industry codes and standards (API, ASME, AWS, NACE, etc.)
  • Understanding of QA/QC processes, procedures, and documentation requirements
  • Ability to read and interpret technical drawings, P&IDs, and specifications
  • Strong attention to detail and accuracy in inspection and reporting
  • Proficiency in Microsoft Office and inspection/reporting software
  • Ability to perform UTT thickness scanning following training and demonstrated competency
  • Ability to work independently and in team environments in field conditions
  • Maintain 100% "Safety Standards and Accountability" in all areas or mandatory/regulatory requirements, which include:
    • Maintain compliance with required HSE Training.
    • Taking necessary action when behaviors or conditions around you may be unsafe.
    • Reporting and addressing all potential safety concerns/incidents/issues promptly and willingly participate and assist in any investigation that may relate to a safety incident.
    • Performs work in strict compliance with permitting requirements, Alaska Safety Handbook (ASH) Standards and other compliance-oriented directives.
    • Participating in safety meetings, working safely, and maintaining a safe work environment as an employee and representative of Kakivik
    • Document and record any injury or near miss incident that may occur while you are working.
    • Demonstrate and promote safe work practices by participating in JSA reviews, pre-job walkdowns and safety START card preparations covering work activities and materials required by the company and the client.
    • Promote and participate in Safety Programs.
  • Other duties as assigned.

Required Qualifications:
  • Valid driver license
  • Minimum 2-5 years of QA/QC or inspection experience in industrial, oil & gas, or construction environments
  • Completion of 40-hour Ultrasonic Testing (UT) training
  • Documented On-the-Job Training (OJT) and demonstrated competency to perform UTT thickness scanning
  • Basic knowledge of NDT methods and inspection techniques

Preferred Qualifications:
  • NDT Level I or II (UT, MT, PT, etc.) in accordance with SNT-TC-1A
  • Experience performing ultrasonic thickness testing in field environments
  • Experience with mechanical integrity programs or asset integrity inspections
  • Previous experience working with industrial service companies or on multi-discipline projects

Work Environment:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Physical Requirements:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. A pre-hire post offer Functional Capacity Evaluation (FCE) will be conducted to determine an employee's ability to perform to the job standard. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Level 1, 2, 3
  • MOBILITY: Must be able to access all controls and all parts of machinery for service. Must be able to push/pull 50 pounds for 20 feet.
  • HEARING: Must be able to hear audible safety alarms.
  • VISUAL ACUITY: Must be adequate to perform above listed tasks in a safe manner and take hand signals from ground man or flag man.
  • LIFTING: Must be able to routinely lift up to 50 pounds from floor to waist, 30 pounds from wait level to shoulder height and carry 50 pounds for 20 feet.
  • RANGE OF MOTION: An objective range of motion measurements will be conducted and recorded using a five position and rapid exchange grip strength test during the pre-hire/post offer FCE.

Compensation:
Kakivik offers a competitive salary, career growth opportunities and for full-time positions we offer a Full Benefits Package including excellent FEHB Medical, Dental and Vision Insurance, Life insurance, and a 401k match program.
Contingencies:
Offer contingent upon ability to pass a pre-employment drug test.
This job description is not an employment agreement or contract. Management has the exclusive right to alter the scope of work at any time without prior notice.
Kakivik Asset Management is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law.
Kakivik Asset Management gives preference first to BBNC shareholders, their spouses or descendants, and second to other Alaska Native Corporation Shareholders in accordance with P.L. 93-638.

Apply