1

Process Control Manager Jobs in Lubbock, TX (NOW HIRING)

Review process control equipment and installation. * Review field device calibration data. * In ... Effectively communicate with Start-up Managers, Engineers, Subcontractors, and site Start-up staff.

Review process control equipment and installation. * Review field device calibration data. * In ... Effectively communicate with Start-up Managers, Engineers, Subcontractors, and site Start-up staff.

Review process control equipment and installation. * Review field device calibration data. * In ... Effectively communicate with Start-up Managers, Engineers, Subcontractors, and site Start-up staff.

Review process control equipment and installation. * Review field device calibration data. * In ... Effectively communicate with Start-up Managers, Engineers, Subcontractors, and site Start-up staff.

Review process control equipment and installation. * Review field device calibration data. * In ... Effectively communicate with Start-up Managers, Engineers, Subcontractors, and site Start-up staff.

Review process control equipment and installation. * Review field device calibration data. * In ... Effectively communicate with Start-up Managers, Engineers, Subcontractors, and site Start-up staff.

Review process control equipment and installation. * Review field device calibration data. * In ... Effectively communicate with Start-up Managers, Engineers, Subcontractors, and site Start-up staff.

Review process control equipment and installation. * Review field device calibration data. * In ... Effectively communicate with Start-up Managers, Engineers, Subcontractors, and site Start-up staff.

Review process control equipment and installation. * Review field device calibration data. * In ... Effectively communicate with Start-up Managers, Engineers, Subcontractors, and site Start-up staff.

Review process control equipment and installation. * Review field device calibration data. * In ... Effectively communicate with Start-up Managers, Engineers, Subcontractors, and site Start-up staff.

Management of Supplier Quality Process including defining receiving inspections for incoming goods and incoming control systems and supplier evaluations together with the Purchasing Department and ...

Management of Supplier Quality Process including defining receiving inspections for incoming goods and incoming control systems and supplier evaluations together with the Purchasing Department and ...

Director of Quality

Lubbock, TX · On-site

$90 - $120/hr

Management of the failure analysis process and activities including inline, development, end of ... control including but not limited to annual reviews, incoming specifications management and ...

Staffing, Paperwork, Cost Controls, Cash control, Food management, Work to a Schedule, Perfect ... Receive and process telephone orders. Take inventory and complete associated paperwork. Clean ...

Staffing, Paperwork, Cost Controls, Cash control, Food management, Work to a Schedule, Perfect ... Receive and process telephone orders. Take inventory and complete associated paperwork. Clean ...

Staffing, Paperwork, Cost Controls, Cash control, Food management, Work to a Schedule, Perfect ... Receive and process telephone orders. Take inventory and complete associated paperwork. Clean ...

Showing results 41-60

Process Control Manager information

See Lubbock, TX salary details

$32.2K

$86.7K

$119.4K

How much do process control manager jobs pay per year?

As of Sep 5, 2026, the average yearly pay for process control manager in Lubbock, TX is $86,670.00, according to ZipRecruiter salary data. Most workers in this role earn between $77,300.00 and $97,000.00 per year, depending on experience, location, and employer.

What is a process control manager?

A Process Control Manager is responsible for overseeing and optimizing the various control systems and processes used in manufacturing or industrial operations. Their role involves ensuring that production processes run smoothly, efficiently, and safely by managing automated systems, monitoring performance, and implementing improvements. They often work closely with engineering, production, and quality assurance teams to identify issues and enhance process reliability. Additionally, they may be involved in training staff, maintaining compliance with regulations, and deploying new technologies to improve process control.

What are the key skills and qualifications needed to thrive as a process control manager?

To thrive as a Process Control Manager, you need a strong background in engineering or process technology, analytical problem-solving abilities, and experience in manufacturing or industrial environments. Familiarity with distributed control systems (DCS), programmable logic controllers (PLCs), process automation software, and often certifications like Six Sigma or PMP are highly valued. Excellent leadership, communication, and decision-making skills help manage teams and coordinate with cross-functional departments effectively. These competencies are vital for ensuring process efficiency, safety, quality, and continuous improvement within complex production operations.

What are some typical challenges a process control manager might face in a manufacturing environment?

Process Control Managers often encounter challenges such as integrating new technologies with legacy systems, maintaining process consistency across shifts, and troubleshooting unexpected process deviations. They must also ensure compliance with safety and quality standards while coordinating closely with engineering, production, and maintenance teams. Strong problem-solving skills and effective communication are essential for navigating these complexities and driving continuous improvement initiatives.

What is the difference between Process Control Manager vs Process Engineer?

AspectProcess Control ManagerProcess Engineer
CredentialsBachelor's degree in engineering, certifications in process control (e.g., Certified Control Systems Technician)Bachelor's or master's in chemical, mechanical, or industrial engineering; certifications vary
Work EnvironmentSupervises control systems teams, manages process control strategies in manufacturing plantsDesigns, develops, and optimizes manufacturing processes, often in labs or plant settings
Employer & IndustryManufacturing, oil & gas, chemical industriesChemical, pharmaceutical, manufacturing industries

The Process Control Manager oversees the implementation and maintenance of control systems, focusing on team management and strategy. In contrast, the Process Engineer concentrates on designing and improving processes. Both roles require technical expertise but differ in scope and responsibilities.

What are the most commonly searched types of Process Control jobs in Lubbock, TX?

The most popular types of Process Control jobs in Lubbock, TX are:

What are popular job titles related to Process Control Manager jobs in Lubbock, TX?

For Process Control Manager jobs in Lubbock, TX, the most frequently searched job titles are:

What job categories do people searching Process Control Manager jobs in Lubbock, TX look for?

The top searched job categories for Process Control Manager jobs in Lubbock, TX are:

What cities near Lubbock, TX are hiring for Process Control Manager jobs?

Cities near Lubbock, TX with the most Process Control Manager job openings:

I&C Lead Commissioning & S/U

MasTec Inc

Abernathy, TX • On-site

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted yesterday


MasTec rating

7.4

Company rating: 7.4 out of 10

Based on 156 frontline employees who took The Breakroom Quiz

34th of 80 rated construction


Job description

Overview

Company Overview

The Name operating group/Company Name is part of the MasTec Clean Energy & Infrastructure (CE&I) business segment. The CE&I segment generates over $4.5 billion in annual revenue, providing construction services across our renewables, industrial, infrastructure, and general building operating groups. Sustainability and safety are foundational to our culture and influence everything we do.

MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Join one of the largest construction firms in the country (Engineering News-Record [ENR]: #1 in Power, #16 Top 50 Domestic Heavy Contractors, #13 Transportation Contractor). 

 

POSITION SUMMARY:

The Lead Instrumentation and Controls (I&C) Startup Technician is the responsible lead for systems controls functionality of all equipment and controls. The Technician is the primary point of contact for all system I&C function commissioning, checkout and start up through the operation of the equipment / plant.


Responsibilities

ESSENTIAL JOB FUNCTIONS:

  • Assist in the development of startup packages as required. Track and control all documentation required for proper maintenance of the startup packages.
  • Assist in the development of procedures as required to satisfy the EPC Agreement and/or coordinate the startup effort.
  • Assist in the advanced planning and preparation for startup activities and major milestones.
  • Understanding, knowledge and competency of basic use of electrical and instrument equipment and instruments required for checkout, calibration and commissioning.
  • Understanding and competency of basic equipment and instrument calibration.
  • Support DCS loop and logic testing.
  • Support from an I&C standpoint, the initial run of equipment and systems.
  • Review process control equipment and installation.
  • Review field device calibration data.
  • In conjunction with the Construction Foreman, coordinate I&C Technician activities.
  • Perform field engineering changes.
  • Track, record and report progress on assigned systems.
  • Record “as-built” engineering changes on drawings.
  • Maintain plant turnover documentation.
  • Support plant operation.
  • Take personal responsibility for safety and environmental compliance, demonstrate leadership in safety at the Project Site, and show commitment to an Incident-Free workplace through Employee’s own actions as well as by coaching and mentoring others.

Qualifications

EDUCATION AND WORK EXPERIENCE REQUIREMENTS:

  • Minimum of ten (10) years of site commissioning and start up experience with progressive responsibility on Projects for industries such as Power Generation, Chemical Processing, Petrochemical, or similar.
  • Prefer working knowledge of startup testing techniques in electrical disciplines.
  • Previous experience as a Start-up Electrical Technician or similar position preferred.
  • Experience in both new project and revamp work preferred.

KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED:

  • Be knowledgeable of MIC Health and Safety programs and project specific regulations.
  • When on-site, actively participate in daily toolbox meetings with crews and subcontractors.
  • Set a personal example of safe behavior.
  • Other may duties may be assigned
  • Working ability with Microsoft Office required.
  • Ability to read, analyze and interpret drawings, technical procedures, Subcontracts and contracts.
  • Ability to write reports, prepare written correspondence concerning Project needs and issues, and to document project activities.
  • Effectively communicate with Start-up Managers, Engineers, Subcontractors, and site Start-up staff.
  • Solve practical problems based on experience and Project technical requirements.
  • Interpret instructions furnished in written, oral, diagram or schedule form.
  • Must be able to navigate obstacles while walking at construction sites, climb ladders and stairs, occasionally lift objects weighing up to 35 pounds, hear horns and warning alerts, and visually inspect installed work.
  • Willingness and ability to be assigned to Project Sites 100% of the time from mobilization until Project completion with potential travel to Company, Engineering, or Supplier facilities for brief periods. May be temporarily assigned to a Company office location.

PHYSICAL DEMANDS:

  • Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions.
  • May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks.
  • Stamina to perform this task repetitively and continuously for several hour intervals.
  • Uncontrolled environmental conditions: Constant change in weather and site conditions.
  • This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises.
  • Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.).
  • Move in and around confined, cluttered, and uneven areas.
  • May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights.
  • Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings.
  • Visualize objects in three dimensions from drawings.
  • Keep good balance and work at heights.
  • See well (either naturally or with correction).
  • Hear well (either naturally or with correction.)
  • Coordinate the use of eyes, hands, and feet.

HOURS:

This position is a Full-Time position scheduled to work typically 50 hours per week.  Schedule is subject to projects requirements.

TRAVEL:

Travel required up to 90%.  Position requires presence directly on the Project Site location with intermittent travel to residence of record.

 

What's in it for You

Financial Wellbeing

  • Compensation $155,000-$175,000 / year, commensurate with experience

  • Competitive pay with ongoing performance review and merit increase

  • 401(k) with company match & Employee Stock Purchase Plan (ESPP)

  • Flexible spending account (Healthcare & Dependent care)

Health & Wellness

  • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children

  • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance, Weight Management Drug Discount

  • Discounted National Gym Membership Network

Family & Lifestyle

  • Paid Time Off, Paid Holidays, Bereavement Leave

  • Military Leave, including Benefits Continuation

  • Employee Assistance Program

Planning for the Unexpected

  • Short and long-term disability, life insurance, and accidental death & dismemberment

  • Voluntary life insurance, accident, critical illness, hospital indemnity coverage

  • Emergency Travel Assistance Program

  • Group legal plan

Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact ceicareers@mastec.com. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. 

MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions.

Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at https://reportfraud.ftc.gov/.

MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-RM1

Qualifications:

EDUCATION AND WORK EXPERIENCE REQUIREMENTS:

  • Minimum of ten (10) years of site commissioning and start up experience with progressive responsibility on Projects for industries such as Power Generation, Chemical Processing, Petrochemical, or similar.
  • Prefer working knowledge of startup testing techniques in electrical disciplines.
  • Previous experience as a Start-up Electrical Technician or similar position preferred.
  • Experience in both new project and revamp work preferred.

KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED:

  • Be knowledgeable of MIC Health and Safety programs and project specific regulations.
  • When on-site, actively participate in daily toolbox meetings with crews and subcontractors.
  • Set a personal example of safe behavior.
  • Other may duties may be assigned
  • Working ability with Microsoft Office required.
  • Ability to read, analyze and interpret drawings, technical procedures, Subcontracts and contracts.
  • Ability to write reports, prepare written correspondence concerning Project needs and issues, and to document project activities.
  • Effectively communicate with Start-up Managers, Engineers, Subcontractors, and site Start-up staff.
  • Solve practical problems based on experience and Project technical requirements.
  • Interpret instructions furnished in written, oral, diagram or schedule form.
  • Must be able to navigate obstacles while walking at construction sites, climb ladders and stairs, occasionally lift objects weighing up to 35 pounds, hear horns and warning alerts, and visually inspect installed work.
  • Willingness and ability to be assigned to Project Sites 100% of the time from mobilization until Project completion with potential travel to Company, Engineering, or Supplier facilities for brief periods. May be temporarily assigned to a Company office location.

PHYSICAL DEMANDS:

  • Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions.
  • May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks.
  • Stamina to perform this task repetitively and continuously for several hour intervals.
  • Uncontrolled environmental conditions: Constant change in weather and site conditions.
  • This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises.
  • Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.).
  • Move in and around confined, cluttered, and uneven areas.
  • May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights.
  • Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings.
  • Visualize objects in three dimensions from drawings.
  • Keep good balance and work at heights.
  • See well (either naturally or with correction).
  • Hear well (either naturally or with correction.)
  • Coordinate the use of eyes, hands, and feet.

HOURS:

This position is a Full-Time position scheduled to work typically 50 hours per week.  Schedule is subject to projects requirements.

TRAVEL:

Travel required up to 90%.  Position requires presence directly on the Project Site location with intermittent travel to residence of record.

 

What's in it for You

Financial Wellbeing

  • Compensation $155,000-$175,000 / year, commensurate with experience

  • Competitive pay with ongoing performance review and merit increase

  • 401(k) with company match & Employee Stock Purchase Plan (ESPP)

  • Flexible spending account (Healthcare & Dependent care)

Health & Wellness

  • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children

  • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance, Weight Management Drug Discount

  • Discounted National Gym Membership Network

Family & Lifestyle

  • Paid Time Off, Paid Ho...


What MasTec employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom