ZipRecruiter

Log In

1

Plc Embedded Jobs in Ohio (NOW HIRING)

LTA Research

Senior Software Engineer (Ohio)

Akron, OH · On-site

$125K - $150K/yr

Experience working with C and/or embedded C. * Experience working with PLC systems and HMI. * Experience in development of UI for cockpit, instrument cluster, equipment. * Basic front-end and ...

LTA Research

Senior Software Engineer (Ohio)

Akron, OH

$125K - $150K/yr

Experience working with C and/or embedded C. * Experience working with PLC systems and HMI. * Experience in development of UI for cockpit, instrument cluster, equipment. * Basic front-end and ...

LTA Research

Senior Software Engineer (Ohio)

Akron, OH

$125K - $150K/yr

Experience working with C and/or embedded C. * Experience working with PLC systems and HMI. * Experience in development of UI for cockpit, instrument cluster, equipment. * Basic front-end and ...

Vitamix

Electrical Engineer, Hardware Development

OH · On-site

Develops embedded systems control and firmware * Coordinates and assists in the development of test ... Familiarity and/or experience with/in PLC, HMI, Control Panel Design and PCB Layout * Working ...

BAE Systems

Eng II - SW

Dayton, OH · On-site

$72K - $122K/yr

Write and test enterprise/embedded software for C2ISR systems * Design, develop integrate and test ... S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which ...

next page

Showing results 1-20

All JobsPlc Embedded JobsPlc Embedded Jobs in Ohio

Plc Embedded information

What is the difference between Plc Embedded vs Plc Programmer?

AspectPlc EmbeddedPlc Programmer
CredentialsTechnical certifications in embedded systems, PLC programmingPLC programming certifications, technical skills in automation
Work EnvironmentEmbedded system development, hardware integrationIndustrial automation, control panel programming
Industry UsageManufacturing, automotive, roboticsFactories, process control, automation industries

Plc Embedded focuses on developing embedded systems that integrate PLC technology into hardware devices, often requiring knowledge of hardware design and embedded programming. Plc Programmers primarily write and troubleshoot PLC code for automation systems. While both roles involve PLCs, Plc Embedded emphasizes hardware-software integration, whereas Plc Programmers concentrate on software logic for automation processes.

What are popular job titles related to Plc Embedded jobs in Ohio? For Plc Embedded jobs in Ohio, the most frequently searched job titles are:
What job categories do people searching Plc Embedded jobs in Ohio look for? The top searched job categories for Plc Embedded jobs in Ohio are:
What cities in Ohio are hiring for Plc Embedded jobs? Cities in Ohio with the most Plc Embedded job openings:
Plc Embedded jobs near you
I&C Component Engineer (Instrumentation & Controls)

I&C Component Engineer (Instrumentation & Controls)

TXU Energy

Perry, OH

Full-time

Re-posted 22 hours ago

Job description

If you have what it takes to become part of the Vistra family and would like to start a promising career with a global leader, take a look at the exciting employment opportunities that are currently available and apply online.

Job Summary

The Component Engineer for Instrumentation and Controls (I&C) is responsible for the technical oversight, reliability, and lifecycle management of critical I&C components within the nuclear power plant. This role ensures the safe, reliable, and code-compliant operation of electronic and software-based systems that support plant protection, control, monitoring, and data acquisition functions. The engineer will support maintenance, modifications, troubleshooting, and regulatory compliance for a defined set of I&C hardware and software components, including circuit cards, industrial computers, power supplies, recorders, programmable logic controllers (PLCs), controllers, monitors, and embedded or system-level software.

Job Description

Key Accountabilities:

  • Technical Stewardship: Serve as the primary engineering authority for assigned I&C components, including printed circuit cards, control processors, power supply units, analog/digital recorders, PLCs (e.g., Allen-Bradley, Modicon, Triconex), distributed control system (DCS) controllers, and monitoring equipment.
  • Component Reliability: Perform root cause evaluations (RCEs), failure analyses, and trending of component performance to identify and mitigate degradation mechanisms. Develop corrective actions and reliability improvements for recurring issues.
  • Maintenance Support: Provide engineering support to maintenance and operations teams for troubleshooting, repair, calibration, and testing of I&C systems. Review and approve maintenance work packages and outage support activities.
  • Design and Modifications: Lead or support engineering change packages (ECPs), including design reviews, configuration control, and as-built documentation updates. Ensure modifications comply with ASME NQA-1, 10 CFR 50, and plant-specific design basis requirements.
  • Software Configuration Management: Oversee the configuration, version control, and change management of embedded software in PLCs, controllers, and monitoring systems. Ensure compliance with software quality assurance (SQA) standards and cyber security requirements (e.g., NEI 08-09).
  • Spare Parts Management: Evaluate obsolescence risks, qualify replacement parts, and support form-fit-function (FFF) assessments for I&C components. Maintain bill of materials (BOMs) and approved vendor lists.
  • Testing and Qualification: Develop and review test procedures for component acceptance, periodic surveillance, and post-repair verification. Support environmental qualification (EQ) and seismic qualification as required.
  • Regulatory Compliance: Ensure I&C components meet regulatory requirements, including those related to safety-related systems, single failure criterion, and independence. Interface with licensing and technical specification teams as needed.
  • Vendor and OEM Coordination: Work with original equipment manufacturers (OEMs) and third-party vendors to resolve technical issues, obtain documentation, and support repair or redesign efforts.
  • Documentation and Standards: Maintain and update technical specifications, equipment databases, and engineering manuals. Contribute to the development of plant standards and procedures for I&C component management.

Education, Experience and Skill Requirements:

  • Bachelor's degree in Engineering (Electrical, Computer or related field) from an accredited program.
  • Minimum 6 years of relevant job experience in nuclear or industrial I&C systems
  • Strong understanding of analog and digital electronics, power supply design, signal integrity, and embedded systems.
  • Familiarity with software configuration management, change control processes, and cyber security practices for digital systems.
  • Knowledge of nuclear regulatory requirements (10 CFR 50, 10 CFR 21, ASME NQA-1, IEEE standards).
  • Proficiency with test equipment (oscilloscopes, multimeters, logic analyzers) and diagnostic methodologies.
  • Professional Engineer (PE) license preferred or ability to obtain one.
  • Experience with DCS platforms such as Foxboro IA, Westinghouse WDPF, or GE Mark VI/VIe.
  • Understanding of software development lifecycle (SDLC) in safety-critical environments.
  • Experience with obsolescence management and reverse engineering of legacy circuit cards.
  • Familiarity with software version control systems (e.g., Git) in an industrial context.
  • Working knowledge of cybersecurity standards for nuclear I&C (e.g., NEI 08-09, NRC Regulatory Guide 5.71).
  • Experience with PLC programming (ladder logic, function block diagrams) and industrial control software (e.g., RSLogix, Unity Pro, WinCC).

    Key Metrics:

    • Prepare engineering reports and component health assessments
    • Perform tasks in accordance with established expectations for nuclear safety and personnel safety
    • May be responsible for developing other employees in area of expertise
    • Serves a lead role on projects, teams, processes, or programs related to rotating equipment
    • One of few who possess abilities not easily gained and of significant depth in rotating equipment expertise

    Up to 25% travel may be required to corporate locations, power plants, other utilities, and industry meetings to support work activities.

    This position can be located at any of our nuclear sites.

    ** Final pay grade will be determined based on applicant's experience and qualifications **

    Job Family

    Engineering Services

    Company

    Vistra Nuclear Operations Company

    Locations

    Glen Rose, TexasTexas
    We are a company of people committed to: Exceeding Customer Expectations, Great People, Teamwork, Competitive Spirit and Effective Communication. If this describes you, then apply today!
    If you currently work for Vistra or its subsidiaries, please apply via the internal career site.

    It is the policy of the Company to comply with all employment laws and to afford equal employment opportunity to individuals in all aspects of employment, including in selection for job opportunities, without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, age, disability, genetic information, military service, protected veteran status, or any other consideration protected by federal, state or local laws.

    If you are an individual with a disability and need assistance submitting an application or would like to request an accommodation, please email usatassistance@vistraenergy.comtomake a request.

    Apply