Plating Process Engineer Jobs in Florida (NOW HIRING)

CNC Programmer

Reports To:

Machine Shop Supervisor

Job Hours:

• Flexibleto workextended hours as needed.

Job Summary:

The CNC Programmeris responsible forproducing machine parts by programming, setting up,operatinga computer numerical control (CNC) machine, andmaintainingquality and safety standards. Loading, unloading, and dimensionally verifying machined assemblies is a vital responsibility of this position.

Supervisory Responsibilities:

n/a

Duties/Responsibilities:

• Read technical drawings and set up the machines following the blueprints.

• Use computer software to model cutting paths and program machines accordingly.

• Adjust machine cutting paths or settings tooptimizeproduction whilemaintainingquality.

• Ensure assemblies requiring a plating operation are adjusted accordingly.

• Responsible for generating the toolpath usingMasterCamprogramming software.

• Responsible for saving programs.

• Responsible for posting the program to the CNC machine to create the assembly.

• Perform quality assurance tests to ensure products meet design specifications;modifyprograms toeliminateerrors and meet quality standards.

• Responsible for reviewing the work traveler and assembly prints.

• Troubleshoot and resolve problems with machines as they arise.

• Perform essential machine maintenance such as cleaning and sharpening.

• Produce quality programs to ensure the attainment of productivity goals.

Required Skills/Abilities:

• Ability to read and interpret mechanical documents and drawings.

• Mechanical aptitude and good math skills.

• Skill in operating CNC machinery and tooling as well as precision measurement tools.

• Good timemanagement skills.

• Attention to detail and thorough in completing work tasks.

• Abilityto work independently and closely follow directions is essential.

• Must be a U.S. citizen to apply

Education and Experience:

• High school diploma or equivalent required.

• 3+ years proven experience as a CNC Programmer.

• Lathe and Wire EDM experience preferred.

• Mastercam programming experience is mandatory

Accountabilities:

• Achieve production/productivity goals.

• Achieve deadlines (production, reporting).

• Achieve quality standards within acceptable limits (first-pass yield).

Physical Demands:

• Occasionallyberequiredto push,pulland move objects up to 50 pounds.

• Hearing, seeing ability to include depth perception, peripheralvisionand rapid mental coordination.

• While performing the duties of the job, the employeeis regularly required tostand, walk and reach with hands and arms.

Work Environment:

• While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles.

• The noise level in the work environment is usually moderate.

Benefits:

• Eligible for 401(k) retirement plan

• Health, dental, vision,lifeand disability insurance

• Paid time off

The above description reflects the general details considered necessary to describe the primary responsibilities and functions of the jobidentifiedand shall not be construed as a detailed description of all the work requirements that may be inherent to this job.

Space Machine & Engineering Corp. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against based on their race, color, Religion, gender, disability, veteran status, sexual orientation, gender identity, nationaloriginor other protected classification.

You should be proficient in:

• GD&T
• Industrial and Manufacturing Engineering
• CNC Tooling
• Statistical process control (SPC)
• CNC Programming
• AS9100
• ITAR Compliance
• G-Code
• Production Optimization
• Design for Manufacturability (DFM)
• Mechanical Design & Engineering
• CNC Machine Setup & Changeover
• Advanced Inspection & Gauge Measurement
• Machine Geometry & Alignment
• Machine Setups for Production Runs
• CAD/CAM Software
• Basic Computer Skills

Machines & technologies you'll use:

• CNC Mill (3-4 axis VMC) (Fanuc, Bridgeport, Mazak, ProtoTRAK, Haas, Okuma, Doosan, Kitamura, Makino, Brother, Hurco, Dmg Mori Seiki, Hwachon)
• CNC Lathe (2-4 axis) (Haas, Nakamura, Fuji, Murata, Samsung, Mazak, Okuma, Doosan, Takisawa, Dmg Mori Seiki, Hyundai - Wia, Hwachon)
• CAM Software (Mastercam, Esprit, Siemens NX)
• CNC Mill (5+ axis VMC) (Fanuc, Matsuura, Mitsubishi, Mikron, Mazak, Dmg Mori Seiki, Haas, Hwachon, Okuma, Kitamura)
• CNC Lathe (5+ axis) (Okuma, Doosan, Index, Eurotech, Miyano, Hwachon, Nakamura, Samsung, Dmg Mori Seiki, Mazak)